#1 Home Improvement Retailer

Internet #306808303

Model #E022/S

Store SKU #1003589857

Stainless Steel Handrail Support with Concealed Screw Flange Canopy

$2965
Store
0 in stock
Text to Me

Frequently Bought Together

+
+
Price:
$2965

Product Overview

Professional Grade 304 stainless steel handrail bracket, used for interior handrail supports in your home or office. Made of solid stainless material. This handrail support conceals the wall screws with a flange canopy that's 3 5/16 in. in width. Mounting hardware kit includes: Concealed wall Screw canopy, round handrail saddle, machine screw for attaching saddle to handrail support, three sheet rock wall anchors and corresponding screws.
  • Handrail bracket can be used with metal or wooden round handrails or grab bars
  • Some assembly required
  • Satin 240 grain, stainless steel finish
  • Constructed out of professional grade 304 stainless steel
  • Italian design adds a modern clean look to any interior

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
3.74
Product Height (in.)
4.33
Product Width (in.)
2.55

Details

Interior/Exterior
Interior
Material
Stainless Steel
Product Weight (lb.)
0.98
Returnable
90-Day
Stair Part Type
Accessory

Warranty / Certifications

Manufacturer Warranty
No Warranty

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 3
    out of 2 reviews
  • 0% recommend this product
Filter by:
Showing 1-2 of 2 reviews
The overall quality of these is very high. They...
The overall quality of these is very high. They are solid and very well made. My only issues with them are as follows: 1) to adjust the angle of the support for the handrail you need to adjust the single screw that secures the handrail support to the base, which is against the wall when mounted. So, you need to mount everything, find the adjustment needed, remove it, adjust it, replace it, repeat as needed. 2) the decorative flange that covers the base has about 1/8" of clearance all the way around the base, and well over 1/8" space between the base and the inside of the cover. They are not even close to mating. I gather from the manufacturer this is by design. You will need to put something between the base and the cover to hold the cover to it. They suggested silicone or epoxy, I used earthquake/museum putty in case I need to remove the cover at some point.So, fantastic looking and solid, but a bit of a pain for this home non-pro type guy to install.
by JAMES
Response from Indital-Product-TeamAug 18, 2020
James -

Thank you for the feed back and I am sorry to hear the difficulties you had with your installation. IAMDesign
  • Verified Purchase
I would recommend this product if a few issues are addressed: 1. You need to fix the dimensions s...
I would recommend this product if a few issues are addressed: 1. You need to fix the dimensions shown on the installation drawing - are not consistent with the actual hardware. The dimension from the wall surface to the center of the rail is indicate to be 3 9/32. The actual dimension is about 312/32 (3 3/8). This difference caused me to cut the railing for my design too short - very disappointing. 2. Additionally, the screws to attach the support to the railing should have been provided. 3. The installation is somewhat difficult for railings going up stairways - it is difficult to get the angle adjusted to match the slop of the stairs since the screw that allows the support bracket to rotate relative to the part the mounts to the wall is not accessible when the wall bracket is attached to the wall. The design concept is in general good but the execution is not acceptable.
by Steve
    4 people found this helpful
    Showing 1-2 of 2 reviews