The Kidde P3010CU is a 10-year, sealed battery, smoke and carbon monoxide alarm with a voice warning system that features photoelectric and electrochemical sensing technology with Smart Hush feature. This combination alarm combines the detection capabilities of a photoelectric sensor with that of an electrochemical sensor, which is used to detect CO. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarm's overall performance and significantly reduces the potential for a nuisance alarm. The voice warning system announces "Fire", or "Warning, Carbon Monoxide" to help eliminate any confusion and clearly warn you and your family of a smoke or carbon monoxide danger. The sealed in lithium battery will power the unit for the entirety of its 10 year life, eliminating the need for battery replacement and worry about unauthorized battery removal. The alarm provides continuous protection from smoke and carbon monoxide, even during power outages. The alarm will automatically activate when it is attached to the mounting bracket; there are no pull-tabs, no switches, everything is automatic. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement.
- Shop all Kidde fire safety products here
- 10 Year Lithium battery never needs replacement - simply recycle the smoke detector
- 10 Year Limited Warranty
- Self Activation - Alarm automatically activates when attached to the mounting bracket.
- Voice warning alerts of "Fire!" when a smoke or fire hazard is present, "Warning! Carbon monoxide!" when gas is detected, or "Low battery
- End of Life Hush - End of life indication can be silenced three days at a time up to 30 days to allow for alarm replacement at a more convenient time.
- Smart HushTM - Temporarily silences nuisance alarms for approximately 9 minutes and will not allow hush mode unless the unit is in alarm mode.
- Photoelectric Sensor - Smoke alarm contains advanced photoelectric sensor that may detect visible particles (associated with smoldering fires) sooner than ionization alarms.
- Electrochemical sensor technology - detects poisonous carbon monoxide gas
- Combination Smoke and Carbon Monoxide Alarm - Smoke and CO sensing technologies work together to detect real fires faster and reduce nuisance alarms
- Blinking LED lights indicate when: alarm is in operation, was initiated, or is in hush mode
- Replacement Chirp - alerts to replace alarm after 10 years of operation
- Ensure whole home family protection by placing 1 fire detector and carbon monoxide detector on each level of your home, in your bedroom, & other locations where required by law
- Industry experts (such as the NFPA), recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home.
- Smoke and carbon monoxide detectors utilize a photoelectric sensor to detect fire hazards and sound an 85 db alarm when a hazard is detected
- *Check with your state and local fire and Building/Safety codes for specific information regarding smoke & Carbon Monoxide Alarms.
- UL/CSFM reference model P3010CU
- Shop all Kidde Smoke and Carbon Monoxide Detectors
- Properly prepare your home for a fire or carbon monoxide emergency
- Protect your home and family from fire damage using these preventative tips
- Click here for more information on Electronic Recycling Programs
- Return Policy