A:  Thanks for the great question! You can spray the entire mixer, including the inside of the drum. For best results, the hopper and chute should be rinsed and KLEEN KOTE reapplied to that portion of the truck after every load. Any time you clean the drum, hopper, chute or any part of the mixer, you will need to reapply KLEEN KOTE to the surface, allowing KLEEN KOTE to turn from white to clear BEFORE loading cement into the drum. Avoid brakes, pedals or other operating parts of the mixer that may become slippery. If you have any other questions, feel free to call us any time: 800-801-7832. I hope this helps! Jennifer

A:  I have spoken to the manufacturer of this product and they do make some bold claims about its effectiveness of keeping things from sticking. They are very friendly on the phone and it wouldn’t hurt to call them. I used it for concrete forms and snow blowers and so far so good. 

A:  Not sure what the result might be. It worked adequately for my plywood forms with concrete. My sense is epoxy has extremely strong bonding properties and may require a special release agent to serve your purpose.

A:  Hi Dale, Thanks for the great question. Unfortunately, this product will not release epoxy. We suggest contacting the manufacturer of the epoxy for recommended release agents. Best of luck and thank you for your interest in our product! -Jennifer

A:  Hi Craig, That is a great question to ask. Unfortunately, the answer is NO. this product is a BEFORE product that works to prevent concrete and hot mix asphalt from sticking to tools, equipment and machinery. I recommend you find out the brand of the tar/sealer and contact them to find the right product to use on your sidewalk. Best, Jennifer

A:  I guess that's what that warning means. When in doubt, motor oil always works.

A:  Thanks for the great question. You abosolutely can use it at temperatures above 77 degrees fahrenheit. We were unaware that this specification is listed on the product and will work with Home Depot to have this updated. This product is water-based and should be stored at temperatures between 40 degrees Fahrenheit and 90 degrees farhenheit in a closed ontainer. The freezing point is 32 degrees fahrenheit. If you need a copy of our technical data sheet or the Safety Data Sheet, you ca infd them on our website or contact us and we can send them directly to you. https://4progressive.com/kleen-kote-rtu/product-pdf-library/ 800.801.7832 I hope this helps answer your question! Jennifer