#1 Home Improvement Retailer

Internet # 202059078

Model # C10

Store SKU # 451136

Wiremold CordMate Cord Cover 5 ft. Channel, Cord Hider for Home or Office, Holds 1 Cable, White

$7.94
Buy 5 or more $7.15
  • Hide a single cord with the easy peel and stick application
  • Cover TV cords, HDMI or extension cords, phone cables
  • Stylish and paintable design blends in with your decor
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

Wiremold CordMate Cord Cover system is the quick, easy way to conceal a single cord or cable. Perfect for family rooms, bedrooms and offices, its stylish design complements most interior decors and is great for concealing lamp and extension cords as well as phone cables. Combine with optional CordMate accessory fittings to complete your project.

Highlights

  • Ideal for covering home entertainment wires, speaker cables, TV/video cabling and home office wiring
  • Channel is 60 in. in length with pre-attached adhesive backing for quick, peel and press installation
  • Channel measures 9/16 in. wide by 7/16 in. deep
  • Channel can be easily cut to length with a utility knife or fine tooth saw for a custom fit
  • Neutral, white finish can be left as is or can be painted with latex-based paint to match room decor
  • Combine with optional CordMate accessory fittings to complete your project
  • Recommended for indoor installation on a clean, smooth surface
  • Not for running line voltage wiring
  • Made of durable PVC
  • Return Policy

Product Information

Internet # 202059078

Model # C10

Store SKU # 451136

Specifications

Dimensions: H 0.375 in, W 60 in, D 0.5 in

Dimensions

Product Depth (in.)

0.5 in

Product Height (in.)

0.375 in

Product Length (ft.)

5 ft

Product Width (in.)

60 in

Details

Electrical Product Type

Electrical Cords & Cord Management

Number of Pieces

1

Returnable

90-Day

Warranty / Certifications

Manufacturer Warranty

Limited 1 year warranty

Questions & Answers

71Questions
caret
Q:I am installing the codemate now. It is extremely hard to close the channel. Is there any trick?
by|Jan 11, 2024
1 Answer
Answer This Question

A:  Hello. The best method for closing the channel is to start at one end and push to engage the latch, then while holding the end together, slowly work your way down the channel, latching as you go along.

by|Jan 11, 2024
    caret
    Q:Will it adhere to wallpaper?
    by|Dec 10, 2023
    1 Answer
    Answer This Question

    A:  Hello. If the wallpaper is textured the cord cover will not hold well. If the wallpaper is flat, the adhesive will damage the wallpaper if you attempt to remove the channel. We recommend using a couple screws through the base rather than relying on the adhesive. Thank you

    by|Dec 11, 2023
      caret
      Q:How do you reopen the channel to run new wire through it?
      by|Aug 2, 2023
      1 Answer
      Answer This Question

      A:  You will want to use a small flat head screw driver to unlatch and pry the cover from the base. Below is a link to an article on the topic. Thank you. https://legrand.my.site.com/knowledgebase/s/article/Raceways-How-to-separate-the-cover-from-the-base-on-Wiremold-non-metallic-PVC-raceways

      by|Feb 8, 2024
        1 found this answer helpful
        caret
        Q:Does this open-up wide enough to be able to put small screws through it to adhere it on a non-smooth ceiling?
        by|Jan 29, 2023
        3 Answers
        Answer This Question

        A:  No, I was in the similar suitivation, but I have used extra double sided tap to handle the issue. 

        by|Feb 5, 2023

          A:  The single channel Cordmate does not open very far, so it is more difficult to use screws. Cordmate II and Cordmate III are hinged and can open all the way.

          by|Jan 30, 2023

            A:  I used small white cable clamps with nails that are sold for holding wires to rafters. It would probably be a challenge to screw it on, but if you pre-drilled the holes, including one to let a small screw driver through from the front side, you shouldn't have any trouble.

            by|Feb 1, 2023
              Showing 1-4 of 71

              Customer Reviews

              4.4 out of 5

              • 4.4 out of 618 reviews
              • 71% recommend this product
              Filter by:
              Showing 1-10 of 618 reviews
              Cord cover is a little too thick
              The cord cover is nice looking, and I didn't have to paint it. I think it is a little too thick, and if it were thinner it would be easier to cut and to insert the cord. When you peel the paper backing off, it is extremely sticky, so you can't reposition it. I got it fairly straight. It looks much better than the cord hanging there.
              by
                • Recommended
                Do NOT recommend
                Not okay if you are using temporary or for apartments. This specific brand & the adhesive they used is too strong it ripped off my wall paint.
                by
                Response from LegrandSupportApr 1, 2024
                We are sorry to hear that you had difficulty installing and removing this product, but we thank you for taking the time to give feedback. Our CordMate adhesives are designed to be long-lasting for use on flat surfaces. Gently heating the adhesive with a hair dryer can help loosen the adhesive and make it easier to remove without damaging the product or your surface. If you have any additional comments or questions, please reach out to us at (844) 957-3783 from 8:00am-6:00pm EST, or e-mail: customer.support@legrand.us.
                  Insert cable and snap shut FIRST!
                  Read instructions carefully. You cannot snap this stuff shut once it is stuck to a wall. And you certainly can’t open it again if you want to replace the cable. Also, the instructions in the C10 package do not reference C10 at all, only C100/110 and C210/310. Date on instructions is 2013 so in 11 years legrand/Wiremold has not bothered to update them. On the plus side it has not fallen off the wall yet. I cleaned the wall with rubbing alcohol first.
                  by
                  Response from LegrandSupportMar 12, 2024
                  We are sorry to hear that you had difficulty adjusting the channel after installation, but we appreciate you taking the time to give your feedback. The provided adhesive is certainly tough to work with once installed, but this lends itself to the long-lasting nature of the adhesive. If you have any additional comments or questions, please reach out to us at (844) 957-3783 from 8:00am-6:00pm EST, or e-mail: customer.support@legrand.us.
                    • Recommended
                    1 found this review helpful
                    by
                    • Verified Purchase
                    don't buy it
                    Bought these after I did a fresh paint. They are the worst. Bad quality, stickers fall down and took off my freshly painted layers.
                    by
                    Response from LegrandSupportSep 18, 2023
                    We are so sorry to hear that your walls were damaged trying to reposition the channel. Gently heating the adhesive with a hair dryer can help loosen the adhesive and make it easier to remove without damage. If you have any additional questions or feedback, please reach out to us at 1-800-621-0049 or email at customer.support-wm@legrand.us and we would be happy to help.
                      Cord Covers worked well with some bronze paint to help them match with their surroundings.
                      I needed to conceal wiring for an outdoor speaker installation, and because white and beige seemed to be the only colors, I wanted another option to blend in with my dark bronze screen porch beams. I purchased some bronze spray paint at Home Depot, and sprayed each section of the cord cover. When the paint dried and I installed the cord cover into the screen porch, the color matched perfectly and the install looks really good (IMHO).
                      by
                      • Verified Purchase
                      • Recommended
                      2 found this review helpful
                      Screw
                      I was concerned with reviews that said that the Cordmate pieces came off the wall after some time. Even more so when I read in the instructions that came with it that it should not be installed on a "structured surface": my walls have a "roughened" type of surface. So I ran some tests. First, the double-sided tape at the back can *very easily* be pulled off the Cordmate plastic (pic 1). So I took two pieces of Cordmate, one with its own double-sided tape, and the other with it replaced by common 3M Scotch white double-sided mounting tape, and stuck them to a piece of wood. I let it sit overnight and then broke both pieces off the wood (pic 2). Note that the normal Cordmate piece, to the right, came almost completely off the wood, despite its weak adhesion to the plastic! I could now understand the reviews. The 3M tape largely stuck to *both* surfaces, and I already know that it also sticks well to my "structured walls". In addition, I wanted the option to take the Cordmate off the wall if in future I decide I no longer need the cable. So I sawed off the ends of the pieces of Cordmate to use under 45 degrees so that I could screw the ends to the wall (pic 3). (*After* drilling the holes, and *before* screwing the pieces down, I pressed the cord inside them. Closing the Cordmate is difficult, and reopening even more so.) I pulled off the useless double sided tape, but to keep the long piece from bending away from and along the wall, I put a couple of two-inch pieces of 3M tape in its place. (If removing the cord, these can be cut with a thin piece of wire and any remnants on the wall soaked in Goo-Gone I trimmed the 0.5 inch 3M tape to a narrower width using my old Westcott score-and-cut trimmer, pic 4). Finally, I applied some suitable Cordmate fittings to cover the sawed-off ends (pic 5).
                      by
                      Response from LegrandSupportAug 4, 2021
                      Thank you for taking the time to call out such detailed feedback. We are sorry to hear that you had to make so many changes to get the channel to work for your purposes, but are glad you found solutions. If you have any questions about this kit or installation, please reach out to us at 1-800-621-0049 or email at customer.support-wm@legrand.us and we would be happy to help.
                        • Recommended
                        8 found this review helpful
                        Terrible adhesive.
                        Do not buy this peel in stick product. It does not work with gravity. After hours of working on mine it only lasted a day. Super frustrating!
                        by
                        Response from LegrandSupportJun 28, 2021
                        We are sorry to hear that the adhesive did not work for you. Cordmate products stick best to a smooth, clean wall, but if you find you need more support additional adhesive or screws can also be used to install. If you have any additional feedback, please reach out to us at 1-800-621-0049 or email at customer.support-wm@legrand.us and we would be happy to help.
                          2 found this review helpful
                          False Hope
                          I used this to hide an 18-2 cord on my screened porch. I cleaned the smooth painted metal frame with alcohol to ensure good adhesion. It looked amazing and the weight of the cord being nill, I thought, what a great product. Now a year later and I have this stuff hanging like swags all along the walls. No matter how well you clean the surface, no matter how lightweight the wire, no matter how dry the room, no matter how short the run, this stuff will come down by its own weight. If you want it to be permanent, you have to use mechanical fasteners. i.e. screwed!!!
                          by
                          Response from LegrandSupportJun 21, 2021
                          We are sorry to hear that you are disappointed with this cord cover. As you mention, you can also attach it using screws or additional adhesive for a longer lasting result. If you have any additional feedback for us, please reach out at 1-800-621-0049 or email at customer.support-wm@legrand.us and we would be happy to help.
                            • Recommended
                            2 found this review helpful
                            wont stick to the wall
                            I purchased several of these covers in hope of hiding some wires. At least twice a day the covers fell from the wall. They do not stick to the wall for more than half a day.
                            by
                            Response from LegrandSupportJun 17, 2021
                            We are sorry to hear that you are not happy with this cord cover. The adhesive sticks best to a smooth, clean wall, but it you find you need extra support additional adhesive or screws can also be used to hold the channel in place. If you have any additional feedback for us, please reach out at 1-800-621-0049 or email at customer.support-wm@legrand.us and we would be happy to help.
                              • Recommended
                              1 found this review helpful
                              Showing 1-10 of 618 reviews

                              Wiremold CordMate Cord Cover 5 ft. Channel, Cord Hider for Home or Office, Holds 1 Cable, White

                              thumbnail
                              Cordmate Installation
                              How to video on installing Cordmate Series Cord Channel