8 ft. x 12.5 ft. Resin Outdoor Storage Shed

A:  From the item page on HomeDepot.com under "Additional Resources" you will find links to the warranty and manual. The warranty details can be found on page 69 of the manual.

A:  This is from the assembly manual for this shed: • To anchor your shed, you must purchase the correct anchoring hardware. For a concrete platform, we recommend using a hammer drill, 5/16" (8 mm) masonry bit, ten (10) 3/8" x 2" (10 mm x 5 cm) Concrete Screws and ten (10) 3/8" x 1" (10 mm x 2,5 cm) Fender Washers. For a wood-framed platform, we recommend using a drill, 5/16" (8 mm) drill bit, ten (10) 3/8" x 1 1/2" (10 mm x 4 cm) Lag Screws and ten (10) 3/8" x 1" (10 mm x 2,5 cm) Fender Washers. The assembly manual which will show the placement of the screws to anchor the shed can be downloaded from the manufacture’s website at lifetime.com under the model number. You can find manuals by scrolling all the way to the bottom of the web page and clicking on "Assembly Help".

A:  Sorry, no there are not loops for tie downs. You can anchor our sheds and you can find instructions on how to anchor your shed toward the back of the assembly manual. You can download that beforehand from lifetime.com under the model number. Additional hardware may be required. Our sheds are rated for 65 mph winds. You can increase that by anchoring your shed and adding an extreme weather kit which would increase that to 90 mph. We do not claim wind resistance above 90 mph.

A:  We were unfortunately not provided with this information from the manufacturer and I’d suggest reaching out to them directly in order to get the most accurate information.

A:  This shed does come with a slip-resistant high-density polyethylene (HDPE) floor that protects against oil, solvents, and stains. However, you must provide a platform on which to assemble your shed. Proper building permit documentation may be required in your neighborhood. Consult all local building codes prior to assembling the shed. Before beginning assembly, you must pour or construct a platform. There are two types: *Concrete *Wood Frame. Select the type, but know the surface must be level and flat before installation. If the surface is not properly leveled and flat, the shed will not assemble correctly. Proper surface leveling will save you time in the long run, so please don’t ignore this step. We recommend a Concrete platform. It will be the most durable and long-lasting choice. The platform you choose must be built above ground in order to avoid water pooling inside the shed. All lumber must be rated for outdoor use. Detailed instructions on how to construct a proper platform can be found in the product manual which can be downloaded at www.lifetime.com.