|Product Depth (in.)||1.89 in||Product Height (in.)||11.26 in|
|Product Size (oz.)||9||Product Width (in.)||1.89 in|
|Adhesion level||Medium to high||Adhesive Product Type||Cartridge|
|Construction adhesive type||Specialty||Curing time (hours)||12|
|Dry Color||White||Features||Moisture Resistant|
|Hub Required||No hub connection available||Interior/Exterior||Interior|
|Number of Tubes Included||1||Product Weight (oz.)||13.76 oz|
|Recommended Surfaces||Glass, Metal, Plastic||Remote Access||No Remote Access|
|Requires Hub?||No Hub Required||Returnable||90-Day|
|Set Time (Min.)||20||Usage Location||General|
|Voice Control Hub Required||No Voice Control||Works With||No additional compatibility|
A: Thank you for the question. Loctite Power Grab Tub Surround Adhesive is compatible with the RedGard product. However, if you are installing a non-porous tub surround and bonding it to RedGard, which is also non-porous, the adhesive will not bond or cure properly. This product is a latex, water-based adhesive and requires at least one bonding surface to be porous for it to work effectively. It cannot bond two non-porous substrates together.
A: Thank you for the question. Loctite Power Grab Tub Surround Construction Adhesive is not well suited for the intended use of application. In general, construction adhesives should not be used as the sole means of support. Permanent mechanical support should always be used, for safety reasons. If you'd like to share the specific details of your application, please reach out to our team at 1-800-624-7767 so we can help you.
A: Thank you for the question. Yes, Loctite Power Grab Tub-Surround Construction Adhesive will bond a polystyrene surround to unpainted, unsealed plywood. It is important to apply the adhesive to the polystyrene first, and not to the wall. Applying this adhesive to the wall first will not allow the adhesive to develop a good bond to the surround.
A: Thank you for the question. Loctite Power Grab Tub Surround Construction Adhesive is a latex, water-based product and requires at least one bonding surface to be porous. This adhesive will not cure when bonding two non porous substrates such as ceramic tile and a surround.