Voss Wall Mounted Hair Dryer Holder in Chrome

A:  No this bracket cannot be wall mounted with adhesive.

A:  I would so that it can not be mounted with an adhesive. It is a quality piece that has a little weight to it and with a hair dryer, I just feel that it would be too heavy for an adhesive mount.

A:  I wouldn’t recommend that. Constantly removing and replacing the hair dryer would eventually stress an adhesive connection to its failing point, and it’s going to crash down and possibly ruin something. It’s very easy to secure it to the drywall properly so that it will still be up there long after your hair dryer has burned out.

A:  I don't see why not but since it will be used daily I question if it would hold up for a prolonged period of time.

A:  It really should be mounted with anchors or wood screws into a stud. Our hair dryer weighs on the holder but it is held perfectly. This is a beautiful and custom addition to our bath remodel!

A:  Hello Meeeee and thank you for your interest in Moen products. The Moen Voss Wall Mounted Hair Dryer Holder in Brushed Nickel requires screw and wall anchors for installation due to the weight of the holder and blow dryer. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 9:00 am - 5:30 pm (Eastern Time).

A:  Hello Joan and thank you for your interest in Moen products. The Moen Voss Wall Mounted Hair Dryer Holder in Brushed Nickel requires screws and wall anchors for installation. If you have additional technical questions, please feel free to contact 800-289-6636. Our normal hours are 8:00 am - 7:00 pm Monday through Friday EST.

A:  Using the correct drill bit to drill into the tile I don't see why not.

A:  no, has to drill a hole and put the anchor in.

A:  It is held on with screws into the wall so if you can drill the holes for the screws with breaking the tile, it will work.

A:  Large enough to hold any hair dryer

A:  Hello skandi and thank you for your interest in Moen products. The Moen YB5170BN Voss Wall Mounted Hair Dryer Holder in Brushed Nickel diameter measures 3.37”. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).

A:  Aproximately 4cm across. Fits most if not all.

A:  The inner diameter is 3 and 1/4 inches.

A:  The width of the ring is 3.37''.

A:  It is NOT a cup holder but a hair dryer holder

A:  Hello office and thank you for your interest in Moen products. The Moen Voss Wall Mounted Hair Dryer Holder is only meant to hold a hair dryer. If you have additional questions, please feel free to call us at 800-289-6636. Our current business hours are Monday through Friday from 8:00 am - 7:00 pm (Eastern Time).