#1 Home Improvement Retailer

Internet #300879163

Model #48-20-8211

Store SKU #524206

3/16 in. x 6 in. 2-Cutter SDS-Plus Carbide Bit

Frequently Bought Together

+
+
Price:

Product Overview

Milwaukee M/2 2-Cutter SDS-Plus Rotary Hammer Drill bits provide up to 30% faster drilling speeds and up to 20% more holes per charge in cordless rotary hammers. Breaker Point pulverize the material more effectively resulting in up 30% faster drilling speeds compared to competitive SDS-Plus drill bits. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Additionally, M/2 features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2 2-Cutter drill bit line provides the ideal solution in brick, block, and concrete for cordless and corded rotary hammer users.
  • Breaker points for up to 30% faster drilling speeds
  • Variable flutes for up to 20% more holes per battery charge in cordless rotary hammers
  • Rebar guards for increased durability in hard aggregate
  • Reinforced Flutes to avoid bit breakage
  • Centering tip for exact spot drilling
  • Wear mark indicators to indicate end of life
  • ANSI specified to fit common anchors
  • Shop All Milwaukee Tools

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Assembled Depth (in.)
.19 in
Assembled Height (in.)
6 in
Assembled Width (in.)
.19 in
Bit Diameter
3/16 in
Bit Length (in.)
6
Shank Diameter
25/64 in

Details

Bit Material
Carbide
Drill Bit Type
2-Cutter
Drill Bit Type(s) Included
Hammer Drill Bit,Masonry Bit,Percussion Bit
Individual/Set
Individual
Material Application
Brick,Concrete
Returnable
90-Day
Self-Feeding
No
Shank Style
SDS Plus
Tools Product Type
Power Tool

Questions & Answers

11Questions16Answers

Do you make an adaptor for use with a 2760-20 driver?

Asked by ER December 21, 2020
1
Answer

Hello! Our 1/4 in. x 6 in. 2-Cutter SDS-Plus Carbide Bit are intended for use with corded and cordless rotary hammers.

Can this bit be ised to drill a hole in a glass vase?

Asked by Kay August 18, 2020
1
Answer

Hi Kay! Our 1/2 in. x 6 in. 2-Cutter SDS Carbide Bit (48-20-8271) is intended for concrete applications. We suggest checking out our Glass and Tile Drill Bits (48-20-8985) for use in glass.

will this bit drill through rebar

Asked by kenny August 5, 2020
1
Answer

Hi Kenny! Our 1/2 in. x 6 in. 2-Cutter SDS Carbide Bit (48-20-8271) is intended for concrete drilling applications.

3/4” bit but what is the shank diameter?

Asked by DIYbridge July 9, 2020
1
Answer

Hi there! Our 3/4 in. x 12 in. 2-Cutter SDS Carbide Bit (48-20-8265) are for use in cordless rotary hammers.

is center drill bit hollow?

Asked by mo0nd0gy April 2, 2020
1
Answer

No

What is the difference between the Milwaukee 5/32 in. x 6 in. 2-Cutter SDS Carbide Bit and the Mi...

Asked by RS December 16, 2019
1
Answer

As far as I can tell the "Plus" have a slight difference in their groove design. The Plus are backwards compatible to the SDS.

Can this bit be used with a standard drill to drill concrete

Asked by Stu December 16, 2019
1
Answer

Hi Stu! This bit is intended to be used in an SDS-Plus Drill.

Does the 1/4 in. Hex Shoulder serve a purpose?

Asked by Beau July 8, 2019
2
Answers

I believe the 1/4 inch shoulder is so you can put it in a an impact driver.

Will this fit the milwaukee sds tapcon tool

Asked by John March 5, 2019
2
Answers

Yes

Can this also drill through pressure treated lumber?

Asked by DBP June 25, 2018
5
Answers

yes

3/16 in. x 6 in. 2-Cutter SDS-Plus Carbide Bit - page 2

Customer Reviews

  • 4.4
    out of 997 reviews
  • 80% recommend this product
Filter by:
Showing 1-10 of 997 reviews
Complete garbage bit
About three inches into its first hole in brick it stopped making progress. I pulled it out and the tip had melted into a ball. Had to rig up a different chuck and finished the job with the bit that came in the packet of tapcons. Would recommend for making holes in medium thickness cardboard, maybe.
by SPaul
Response from Milwaukee ToolMar 16, 2021
Hello, this is Natalie with Milwaukee Tool. SPaul, thank you for taking the time to leave your review. We're sorry to hear about your frustrations with your 3/16 in. x 7 in. 2-Cutter SDS Carbide Bit with 1/4 in. Hex Shoulder. We would value the opportunity to look into this and provide you with support, so please feel free to reach out to us directly at socialmedia@milwaukeetool.com. Thank You
Piece of Junk
It did t even make it 10 holes. I wasnt drilling more then 2-3” deep also.
by MATT
Response from Milwaukee ToolFeb 11, 2021
Hello, this is Natalie with Milwaukee Tool. mattman4, thank you for taking the time to leave your review. I'm sorry to hear that your 3/16 in. x 6 in. 2-Cutter SDS-Plus Carbide Bit did not match the quality you expected. We would value the opportunity to look into this further and provide you with support, so please feel free to contact us directly at socialmedia@milwaukeetool.com so we can get this matter resolved as soon as possible for you. Thank You
Good product if you use it carefully
I bought 2 5/32 in x 6 in for tapcon installation on concrete floor. I use them very carefully. After drilling a hole, drill bit is dipped in water for cooling. The first bit accomplished about 70 holes. Its tip bent after I drilled 3 holes and forget to cooling it. The 2nd bit accomplished about 90 holes. and the whole carbide bit is gone. I'm not exactly sure why it fail so badly. Maybe it's due to I had to use it to drill through very thin lay of wood(about 1/8 inch). The depth of hole is about 2 inch.
by John
1 person found this helpful
Do Not Reccomend
I’ve putchase 4 of these so far. The first 2 lasted a decent amount of time before they broke. The 2 that I bought this morning melted after less than a minute of use. Im hoping to find a more relianle brand because I am tired of having to stop working to go to Home Depot for new bits.
by KJTstl
Response from Milwaukee ToolAug 17, 2020
Hello, this is Elise with Milwaukee Tool. KJTstl, thank you for your review. We would like the opportunity to investigate your feedback further on your bits. We value hearing your input on why this product didn’t meet your expectations and how we can improve in the future. Please feel free to contact us directly at socialmedia@milwaukeetool.com so we can get this matter resolved as soon as possible for you. Thank You
1 person found this helpful
Not sturdy
I bought 6 drill bits 5/32 x 6” to drill my basement floor for installing wood subfloor. I was not able to drill one single hole. All 6 bits broke or bent horribly bad. Im very dissapponted. if the length was shorter maybe they would have worked better
by Randall
Response from Milwaukee ToolOct 14, 2019
Hello, this is Mackenzie with Milwaukee Tool. Randall, thank you for your review. I am sorry to hear about your frustrations with your 5/32 in. x 6 in. MX2 SDS-Plus Carbide Bit. We'd value the opportunity to learn more about your frustrations with your Milwaukee Tool, and to provide you with support. Please feel free to contact us directly at socialmedia@milwaukeetool.com. It will be our pleasure to provide support once we have received your correspondence. Thank You
3 people found this helpful
I drilled 6&1/2 holes through concrete before I had to change out the battery. This is the secon...
I drilled 6&1/2 holes through concrete before I had to change out the battery. This is the second Milwaukee product I own, and intend to upgrade all my power tools to Milwaukee eventually.
by Infogleaner
1 person found this helpful
Easy to assemble and went thru the concrete like butter. This drill bit was an excellent tool to ...
Easy to assemble and went thru the concrete like butter. This drill bit was an excellent tool to drill through hard concrete
by HomeDepotCustomer
1 person found this helpful
Easy to use, and efficient. Use it to encor a reception counter.
Easy to use, and efficient. Use it to encor a reception counter.
by JLGeneralcontracter2010
Worked perfectly went right through a 12 inch stem wall with ease.
Worked perfectly went right through a 12 inch stem wall with ease.
by ChickenCoop
Just used this bit this past weekend to drill 15 holes in 50 year old concrete. I did predrill th...
Just used this bit this past weekend to drill 15 holes in 50 year old concrete. I did predrill them with a 6" 5/16 bit, but after the first 6" it powered through the remaining 12" on it's own. Overall very happy, no complaints, and bit looks good for many more uses. link to video: https://youtu.be/Zl-zBskJlJM
by JayM
2 people found this helpful
Showing 1-10 of 997 reviews