#1 Home Improvement Retailer

Internet # 202653626

Model # 48-32-4502

Store SKU # 406866

SHOCKWAVE Impact Duty Compact Magnetic Drill Bit Tip Extender/ Holder

$4.97
  • Compatible with Milwaukee SHOCKWAVE Impact Duty™ Insert Bits
  • 2-Piece construction for optimal assembly
  • Custom Alloy76 Steel heat treated for strength & durability
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details
SHOCKWAVE

MILWAUKEE®

SHOCKWAVE™

Impact Duty Driver Bits

Driving Performance Forward

Impact Duty Driver Bits

Best Fitting

Most Durable

Best Fitting

Provides extreme durability for the most demanding job site applications.

SHOCKWAVE™ Advantage

Provides extreme durability for the most demanding job site applications.

Laser blasted tip, generates best fit over the life of the bit

WEAR GUARD TIP

Laser blasted tip, generates best fit over the life of the bit

Each driver bit has a optimized length and width Shockzone to absorb peak torque and prevent breaking

OPTIMIZED SHOCKZONE

Each driver bit has a optimized length and width Shockzone to absorb peak torque and prevent breaking

Custom Alloy Steel Icon

CUSTOM ALLOY76

Custom Alloy Steel Icon

Phillips, Square, Torx, Slotted, ECX, Pozidriv

Optimized Performance For Every Tip Type

Phillips, Square, Torx, Slotted, ECX, Pozidriv

Size Assortment: Ph1, Ph2, Ph3, P2R

SHOCKWAVE™ Impact Phillips Bits

Size Assortment: Ph1, Ph2, Ph3, P2R

Size Assortment: T15, T20, T25, T30, T10, T40, T27

SHOCKWAVE™ Impact Torx Bits

Size Assortment: T15, T20, T25, T30, T10, T40, T27

Size Assortment: SQ1, SQ2, SQ3

SHOCKWAVE™ Impact Square Bits

Size Assortment: SQ1, SQ2, SQ3

Size Assortment: ECX 1, ECX 2

SHOCKWAVE™ Impact ECX Bits

Size Assortment: ECX 1, ECX 2

SAE Bit:  1/16", 5/56", 1/8", 7/64", 1/8", 9/64", 5/32", 3/16", 1/4"

SHOCKWAVE™ Impact Hex bits

SAE Bit: 1/16", 5/56", 1/8", 7/64", 1/8", 9/64", 5/32", 3/16", 1/4"

About This Product

The MILWAUKEE SHOCKWAVE 2.36" Compact Impact Magnetic Bit Holder is engineered for extreme durability and Up to 30X Life. The Milwaukee magnetic bit holder is made from proprietary Custom Alloy76 steel, heat treated to control hardness. The SHOCKWAVE Impact Duty magnetic bit holders feature a powerful magnet allowing for a secure grip and unyielding bit engagement and a C-ring to retain the insert bit. The drill bit holder has a 2-Piece construction providing users with optimal assembly for abusive jobsite applications.

Highlights

  • Use with Milwaukee SHOCKWAVE Impact Duty Insert Bits
  • 2-Piece construction withstands abuse in impact applications
  • Proprietary steel and heat treat process for maximum strength and durability
  • Strong magnetic tip holds fasteners to the drive guide
  • C-ring retains the insert bit
  • Custom Alloy76 Steel maximizes resistance to wear and shock
  • Engineered for extreme durability and up to 30X life
  • Includes: (1) SHOCKWAVE COMPACT IMPACT MAGNETIC BIT HOLDER
  • Shop All Milwaukee Tools
  • Return Policy

Product Information

Internet # 202653626

Model # 48-32-4502

Store SKU # 406866

Additional Resources

Shop All Milwaukee
From the Manufacturer

Specifications

Dimensions: H 0.47 in, W 1.87 in, D 5.75 in

Dimensions

Bit Length (in.)

2.36 in

Drive Size (in.)

.25

Product Depth (in.)

5.75 in

Product Height (in.)

0.47 in

Product Length (in.)

2.36 in

Product Width (in.)

1.87 in

Shank Diameter

1/4 in

Details

Drill Bit Type

Bit Extender/ Holder

Drill Bit Type(s) Included

Bit Extender/ Holder

Features

Magnetic

Impact Driver Capability

Impact Rated

Individual/Set

Individual

Magnetic

Yes

Number of Pieces

2-4 Pieces

Number of Pieces

2

Returnable

90-Day

Shank Style

Hex

Tools Product Type

Power Tool

Questions & Answers

11Questions
caret
Q:Will this work with normal non impact bits?
by|Jan 6, 2024
1 Answer
Answer This Question

A:  Hi John, this is designed to work only with impact bits. - Milwaukee Tool, Social Team

by|Jan 8, 2024
    caret
    Q:What size is this one?
    by|Nov 16, 2022
    1 Answer
    Answer This Question

    A:  2 3/8”

    by|May 2, 2023
      4 found this answer helpful
      caret
      Q:Is there any “play” to the bit when inserting a Milwaukee Shockwave Impact Duty bit? (Does the inserted bit wiggle?)
      by|May 12, 2021
      2 Answers
      Answer This Question

      A:  No wiggle.

      by|May 2, 2023
      27 found this answer helpful

      A:  Maybe a little 1/16 inch makita is better with a stronger magnet

      by|May 2, 2023
        28 found this answer helpful
        caret
        Q:Is the magnet strong enough to hold a screw on to the hex bit?
        by|Jan 26, 2021
        2 Answers
        Answer This Question

        A:  Yes if you use small 3/4 inch screw diver bits. Probably 1 1/2 inch long screws max. Size

        by|Feb 2, 2024
        29 found this answer helpful

        A:  No.

        by|May 2, 2023
        22 found this answer helpful
        Showing 1-4 of 11

        Customer Reviews

        4.4 out of 5

        • 4.4 out of 322 reviews
        • 52% recommend this product
        Filter by:
        Showing 1-10 of 322 reviews
        Stay away from this bit holder.
        Like many others have said , I placed a brand new bit out of a Milwaukee impact kit and it got stuck. Could not even remove with pliers. There is an obvious design flaw that slipped through QC. Milwaukee should do a recall. Normally they make great gear but hard pass on anything that has this bit holder in it.
        by
          I would like a replacement of both the holder and
          I usually enjoy using my Milwaukee tool sets But this bit holder is possibly worst thing I have ever used... Put in my small square driver and removed the old fasteners from my project Since the new fasteners were torx driver I needed to change the bit... Could not remove even with pliers... Holder is now unusable unless I happen to need the small square drive but... Shameful product Milwaukee... And as you can see I love Milwaukee tools...
          by
          Response from Customer ServiceJan 25, 2022
          Thank you for your review. We appreciate your honest feedback and we will pass this information along to our team. Please feel free to contact us at socialmedia@milwaukeetool.com if you would like further investigation into this matter. Thank you. -Cayla
            Nice
            All you have to do is twist the bit back and forth as you pull. It’s in super tight but I’d rather it be tight than loose. I did this a few times until it was easier each time.
            by
              • Recommended
              Save your time, money and walk away
              Bought it today. Open box and bit that comes inside of it as displayed won’t even come out of the sleeve faster. Never used and straight out box, piece of cr** does not work??? I thought I was being punk’d. Is it a King Arthur test, only he and his relatives can pull it out??? Now I have to go back and return it, under the sun, mist a semi pandemic, and stand in a freakin line to return it.
              by
              Response from Customer ServiceJul 28, 2021
              Hello William E, we are sorry that this has been your experience with the SHOCKWAVE™ Impact Magnetic Bit Holder. We appreciate you taking the time to post a review. If you have any additional feedback about this or any of our products, please email us at socialmedia@milwuakeetool.com.
                Stuck first use
                How does this even happen? Brand new drill and bit set as a gift and it’s stuck in the bit extender.
                by
                Response from MarketingJun 14, 2021
                Hello, we appreciate your honest review of our SHOCKWAVE™ Impact Magnetic Bit Holder. We will share this feedback with our team, as we are always trying to improve our products. Thank you - Hannah from Milwaukee Tool
                  Another bit stuck
                  So frustrating. T15 bit stuck in extension arm. Tried putting in the freezer. Tried WD40. Skip this one friends.
                  by
                  Response from Digital CareMar 1, 2021
                  Hello, thank you for taking the time to review our SHOCKWAVE Impact Magnetic Bit Holder. We are sorry to hear about your frustrations. We will be in contact via email shortly to provide further assistance! Thanks- Hannah from Milwaukee Tool
                    I expected better from Milwaukee
                    Purchased a brand new 45 piece Shockwave bit set to go with the new impact driver I received for Christmas. Got it home and tried a couple bits in the short and long extensions and now...... BOTH are stuck. Tried both piers and channel locks and couldn’t remove at all. I read the Milwaukee advice to bench chuck and use some WD-40 and pliers, but why should I need to do that? There has been ZERO torque applied to these bits. If certain bits are not meant to be used in the extensions, tell the consumer. There is virtually zero information that I can find about how or why this would happen and nothing in the package either. I’m a big believer in Milwaukee and these bits seem very-well made, was really looking forward to adding them to the tool box, but back to the store they go. Only 1 star because apparently, the extensions can only be used once. So disappointing.
                    by
                    Response from Customer CareJan 14, 2021
                    Hi DIYGuy72, this is Jacob with Milwaukee Tool. Thank you for your review. I am sorry to hear about your frustrations with your extension bits. We'd value the opportunity to learn more about your frustrations with it, and to provide you with support. I'll follow up with you via email. Thank you.
                      Does the job
                      Just bought this bit holder after reading many reviews of bit holders. This one seems to be the right one for me. It holds bits securely, enough to be able to throw it around with a bit in it and it stay intact. Not very hard to remove as other reviews have said. Strong magnet, enough to hold up a 3/8 drive 9/16 socket and swing it around a bit without it falling off so itll hold any screw you throw at it. Overall seems to be a good product for $4. Now I dont have to depend on finding the right driver ready bit every time! Just be aware the bit looks different than what is originally pictured
                      by
                        • Recommended
                        5 found this review helpful
                        by
                        • Verified Purchase
                        Glad I bought this needed it for work. I’m vey happy can’t wait to get more thank you
                        by
                        • Verified Purchase
                        Showing 1-10 of 322 reviews