Model # PFTT140

Internet #203714670

Store SKU #885580

Powermate 11 in. 139cc 4-Cycle Front-Tine Gas Tiller
0846236005996

Powermate

11 in. 139cc 4-Cycle Front-Tine Gas Tiller

Overview

This Powermate tiller uses a gear-drive system that provides maximum fuel and engine efficiency, allowing the unit to run on less power input than when operated manually and the gasoline-powered engine allows the user to till a large area in little time. The tilling width can be adjusted from 11 in., 16 in. or 21 in. for maximum versatility. The 11 in. front-rotating tines reach up to 8 in. deep into the ground to turn up fresh soil. The 8 in. wheels help stabilize the tiller when operating on rough terrain. This tiller is equipped with front-rotating tines to help to move the tiller forward and a swing tail with drag stake allows for an easy change from till to transporting mode. This machine makes easy, comfortable work of any garden task.
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Installation Options

Product Overview

This Powermate tiller uses a gear-drive system that provides maximum fuel and engine efficiency, allowing the unit to run on less power input than when operated manually and the gasoline-powered engine allows the user to till a large area in little time. The tilling width can be adjusted from 11 in., 16 in. or 21 in. for maximum versatility. The 11 in. front-rotating tines reach up to 8 in. deep into the ground to turn up fresh soil. The 8 in. wheels help stabilize the tiller when operating on rough terrain. This tiller is equipped with front-rotating tines to help to move the tiller forward and a swing tail with drag stake allows for an easy change from till to transporting mode. This machine makes easy, comfortable work of any garden task.
  • Powerful 139cc, 5.0 ft. lbs. OHV engine powers through the toughest soil conditions
  • Adjustable tilling width of 11 in., 16 in. and 21 in.
  • Large 8 in. wheels for ease of mobility
  • Self-sharpening steel tines plow dirt while maintaining the blade edge
  • Gear drive system
  • Forward rotating tines
  • 2-year limited warranty

Product Overview

Model #: PFTT140
Sku #: 885580
Internet #: 203714670

This Powermate tiller uses a gear-drive system that provides maximum fuel and engine efficiency, allowing the unit to run on less power input than when operated manually and the gasoline-powered engine allows the user to till a large area in little time. The tilling width can be adjusted from 11 in., 16 in. or 21 in. for maximum versatility. The 11 in. front-rotating tines reach up to 8 in. deep into the ground to turn up fresh soil. The 8 in. wheels help stabilize the tiller when operating on rough terrain. This tiller is equipped with front-rotating tines to help to move the tiller forward and a swing tail with drag stake allows for an easy change from till to transporting mode. This machine makes easy, comfortable work of any garden task.

  • Powerful 139cc, 5.0 ft. lbs. OHV engine powers through the toughest soil conditions
  • Adjustable tilling width of 11 in., 16 in. and 21 in.
  • Large 8 in. wheels for ease of mobility
  • Self-sharpening steel tines plow dirt while maintaining the blade edge
  • Gear drive system
  • Forward rotating tines
  • 2-year limited warranty

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Customers Also Compared These

Price
Was $290.99
$255.99 /each
Save $35.00 (12%)
$279.00 /each
$599.00 /each
null /null
Name 99cc Gas Versa Compact Rototiller 11 in. 150cc Gas Front Tine Tiller 18 in. 196cc Gas 4-Cycle Rear-Tine Tiller 11 in. 139cc 4-Cycle Front-Tine Gas Tiller
Brand Earthquake Powermate Powermate Powermate
Ratings (164) (163) (223) (14)
Power Type Gas Gas Gas Gas
CA (CARB) Compliant CARB Compliant CARB Compliant Not CARB Compliant CARB Compliant
View Product View Product View Product View Product

Specifications

Dimensions

Assembled Depth (in.)
30 in
Assembled Height (in.)
25.6 in
Assembled Width (in.)
16.3 in
Handle Length (in.)
36
Product Depth (in.)
30
Product Height (in.)
25.6
Product Width (in.)
16.3
Tine length (in.)
11

Details

Adjustable Forward Speed
No
Adjustable Handle
No
Assembly Required
Yes
CA (CARB) Compliant
CARB Compliant
Commercial
No
Engine Displacement (cc)
139
Engine Make
OEM Branded
Engine Type
4 Cycle
Foldable handle
Yes
Fuel Tank Capacity (gallons)
.265
Maximum Till Depth (in.)
8
Maximum Till Width (in.)
21
Number of tines
2
Power Type
Gas
Product Weight (lb.)
105lb
Reconditioned
No
Returnable
30-Day
Reverse
No
Start Type
Pull
Tine Material
Metal
Tine Position
Front
Translucent fuel tank
No

Warranty / Certifications

Certifications and Listings
CARB Compliant
Manufacturer Warranty
2 year limited

Specifications

Dimensions

Assembled Depth (in.)
30 in
Assembled Height (in.)
25.6 in
Assembled Width (in.)
16.3 in
Handle Length (in.)
36
Product Depth (in.)
30
Product Height (in.)
25.6
Product Width (in.)
16.3
Tine length (in.)
11

Details

Adjustable Forward Speed
No
Adjustable Handle
No
Assembly Required
Yes
CA (CARB) Compliant
CARB Compliant
Commercial
No
Engine Displacement (cc)
139
Engine Make
OEM Branded
Engine Type
4 Cycle
Foldable handle
Yes
Fuel Tank Capacity (gallons)
.265
Maximum Till Depth (in.)
8
Maximum Till Width (in.)
21
Number of tines
2
Power Type
Gas
Product Weight (lb.)
105lb
Reconditioned
No
Returnable
30-Day
Reverse
No
Start Type
Pull
Tine Material
Metal
Tine Position
Front
Translucent fuel tank
No

Warranty / Certifications

Certifications and Listings
CARB Compliant
Manufacturer Warranty
2 year limited

Questions & Answers

My Power mate take-up pully tension plastic wheel locked up where can I find parts for it?for the front tine type 139 cc

m
Asked by: Jim
Part list available on line and on the home depot web site for the product - probably can order directly from Powermate
Answered by: ToolTimeTony
Date published: 2018-03-01

Is this gear or belt driven? Manual states there's a belt and would need to adjust tension after use.

Asked by: Keen
I should clarify my answer - I was thinking about the transmission, which is all gears. Yes there is a belt that connects the engine to the transmission. I've never had a need to adjust mine, and as other users have stated, it is not a routine maintenance item. However as with all belts, it will eventually stretch and need adjustment.
Answered by: LEDengineer
Date published: 2018-04-26

Have there been any problems with tines bending when working in rocky areas? Also what is the warranty on the tines?

Asked by: Skittles
Yes , I've had them bend and brake on another tiller, because of rocky soil. Tonight I used this tiller with LOTS of medium to big size rocks and so on. This tiller was a killer. I was tilling parts that hadn't been tilled for a few years. Just take it slow and do a little at a time. I hope this helps.
Answered by: dougie
Date published: 2018-03-01

what causes machine to run for about 10 feet and engine dies out..

fuel is full.. good spark.. I see no control to adjust fuel consumption..
Asked by: dontmatter
Saw in another post from powermate. Check the transmission oil level.
Answered by: Cj9802
Date published: 2016-03-23
  • y_2018, m_5, d_25, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_, sid_203714670, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 176ms
  • QUESTIONS, PRODUCT

Customer Reviews

11 in. 139cc 4-Cycle Front-Tine Gas Tiller is rated 3.4 out of 5 by 14.
Rated 1 out of 5 by from don’t waste your money This tiller only worked for one job the area was about 12 x 12 end it did the job as it was supposed to go and I’ll try to start it again the next day he had died had no idea what is wrong with it but it should last longer than one job. Look for another option this is not worth your money
Date published: 2018-05-10
Rated 4 out of 5 by from Good little tiller for semi tilled soil from previous garden... Good little tiller for semi tilled soil from previous garden and flower beds...starts on first or second pull and easy to move to different areas. On hard packed soil I think it would a little ruff on the operator...All in all I would buy again for my needs.
Date published: 2018-05-22
Rated 5 out of 5 by from Lots of power we love on a mountain and tore... Lots of power we love on a mountain and tore through Rock and roots without a problem.
Date published: 2018-04-25
Rated 5 out of 5 by from Super easy start up, chews through clay eith ease. A lit of vibration, but that's it. Super easy start up, chews through clay eith ease. A lit of vibration, but that's it.
Date published: 2018-05-09
Rated 5 out of 5 by from The tiller worked very good for a small tiller. The tiller worked very good for a small tiller.
Date published: 2018-05-01
Rated 1 out of 5 by from It would only run a few minutes at a time.... It would only run a few minutes at a time.
Date published: 2018-04-24
Rated 5 out of 5 by from Good tiller, easy start and worked great!... Good tiller, easy start and worked great!
Date published: 2018-04-10
Rated 4 out of 5 by from I retired my 20 year old Craftsman Roto-Tiller this season. I selected this unit based on availab... I retired my 20 year old Craftsman Roto-Tiller this season. I selected this unit based on availability. Pros: smooth running engine. Pivot Rear wheel carriage is a dream ( you don't have to drag the tiller backwards. you can roll it now ). Cons: Pre-assembled ! parts are missing. HomeDepot ?? Manufacturer ?? who knows ! Control cable routed wrong and the plastic rust protective coating is sliced in a few places. three washers missing on handle lock knobs. carter pin missing on carriage through rod. Rear bolts on the fenders missing. I'm guessing the fenders were mounted on the top of the base instead of on the underside. this prevents the holes from aligning and making it impossible to add the rear bolts. Operating the unit: before engaging the tines, make sure to lift the front from the ground. this will extend the life of the gears. at least it sounds much better when the tines engage by doing this. to drop the wheels before tilling, left the unit forward and pull the depth bar back for a easy smooth motion to drop the unit back down. did I mention how nice it is to have the tines off the ground when moving this unit ?!? One more design issue when operating; the tine engagement rod is really uncomfortable holding it down. gloves help a little but I miss the old fashioned left hand squeeze lever. All in all, its a good unit for the price point. the folding handle for storage, although extra effort to do so, is a welcome feature. I really don't know what to expect having a gear drive over the old reliable belt drive so make sure to keep the resistance at a minimum when engaging the tines.
Date published: 2018-05-15
  • y_2018, m_5, d_25, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_, sid_203714670, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 219ms
  • REVIEWS, PRODUCT