A: Dear Customer, This item comes with a Fiberglass handle .
A: Yes, simply remove the guard from the broom head. Slide the guard onto the broom handle and screw the handle into the broom head. Snap the guard back in place and you're in business. Hope this helps.
A: remove the scraper ( a small black piece connected to the Broom Bristle on top where the pole attaches ) that is attached to the Broom Bristle, then slide in the pole and rotate to screw in, you can re-install the scraper from the top handle of the push broom pole to lock it in place.
A: Yes the instructions are not very clear. Use a flat head screwdriver to insert at the small clip at base of broom and push in the leverage clip. Insert handle into threaded hole, turn until tight and align broom handle at octagon base. Plastic octagon cover should fall into place.
A: You have to remove the scraper, which comes clipped on the brush at the handle attachment point.
A: Use a screwdriver to pop the plastic cover. Put the handle threw the peace. Screw in the handle then reinstall the plastic cover.
A: The bristles are 3.06 inches.
A: About 2 inches tall.
A: About 3 inches high.
A: The bristles are about 3" and sturdy. Not sure what you require the broom for but I have found it to be quite universal and definitely not overkill.
A: 3 inches
|Name||Smooth Surface Push Broom||Bulldozer 24 in. Multi-Surface Fiberglass Push Broom||Jobsite 24 in. Multi-Surface Fiberglass Push Broom||Job Site 24 in. Multi-Surface Indoor/Outdoor Push Broom (2-Pack)|
|Cleaning Tool Type||Push Broom||Push Broom||Push Broom||Push Broom|
|Bristle Material||Recycled PET||Polypropylene||Poly||Polypropylene|
|View Product||View Product||View Product||View Product|