#1 Home Improvement Retailer

Internet # 100574569

Model # 1407-4

Store SKU # 343991

Store SO SKU #1001371233

1407 4 Gal. (16 qt.) Engineered Wood Flooring Adhesive

$155.00
Apply Now
Pay $130.00 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • For engineered wood flooring
  • Bonds with concrete, plywood and cork underlayment substrates
  • Up to 48 hours curing time
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

ROBERTS 1407 Engineered Wood Flooring Adhesive is an acrylic urethane adhesive designed for the installation of engineered and parquet wood flooring up to 1/2 in. thick and 5 in. wide. This solvent-free adhesive meets the strict requirements of the South Coast Air Quality Management District and may contribute one LEED point for "Low-Emitting Material-Adhesive and Sealant" (IEQ Credit 4.1). The 1407 holds trowel ridges for optimum wood contact, grants excellent working time, and cleans up easily with soap and water. This low VOC, environmentally friendly formulation is low odor and odorless when dry.

Highlights

  • Click here to shop more ROBERTS flooring Adhesive
  • For use with engineered wood planks, plain back parquet flooring and acrylic-impregnated planks up to 1/2 in. thick and 5 in. wide
  • Bonds with concrete (on and above grade), APA rated plywood and acoustic cork underlayment
  • For interior, direct bond installations
  • Rated for heavy residential and moderate commercial traffic
  • Up to 20 minutes open time, 30 minutes working time and 24 to 48 hours curing time
  • Approximately 45 to 55 and 70 to 80 sq. ft. per gallon coverage for engineered wood and prefinished parquet flooring installations respectively
  • Suggested for use with a 1/4 in. x 1/4 in. x 1/4 in. V-notch trowel or 1/8 in. x 1/8 in. x 1/8 in. square notch trowel, depending on installation type
  • Enviro-friendly, solvent-free and LEED compliant; VOC < 2 g/L, SCAQMD Rule 1168
  • Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
  • Non-flammable for safe use
  • 1 year limited warranty
  • Ensure adequate ventilation during flooring installation
  • Return Policy

Product Information

Internet # 100574569

Model # 1407-4

Store SKU # 343991

Store SO SKU #1001371233

Specifications

Dimensions

Container size (qt.)

16

Maximum Coverage Area (sq. ft.)

80 sq ft

Product Width (in.)

12.5 in

Details

Adhesive Type

Engineered Wood

Color Family

Beige

Commercial / Residential

Commercial / Residential

Dry time (hours)

24

Flooring Material Features

Latex based, Solvent free, Water based

Flooring Product Type

Flooring Adhesive

Flooring Type

Engineered Hardwood

Indoor/Outdoor

Indoor

Location

Floor

Product Weight (lb.)

43.2 lb

Quantity

1

Returnable

90-Day

Warranty / Certifications

Lifetime Warranty

No

Manufacturer Warranty

To be free from manufacturing defects

Questions & Answers

142Questions
caret
Q:What adhesive for engineered wood to concrete slab in far south Ga? (Humid, wet climate at certain times)
by|Apr 11, 2024
1 Answer
Answer This Question

A:  The 1407 is for indoor use only and concrete moisture vapor emissions must not exceed 3 lbs/1000 sq ft/24 hours. The subfloor must be dry and free of any excess moisture. If you are concerned with humidity and moisture for an indoor application for engineered wood to concrete, we would recommend our 1550 moisture cured urethane formulation. Customer Care

by|Apr 11, 2024
    caret
    Q:Greetings, I am going to work on some small areas of approximately 4'x4', they are made of 1"x4" parquet and they will be installed directly to already cured cement, this product will help me
    by|Feb 28, 2024
    1 Answer
    Answer This Question

    A:  The Roberts 1407 will work great for this application. Customer Care

    by|Mar 5, 2024
      caret
      Q:I’m going to install 3/8 in T x 6.5 in W engineered wood floor on basement concrete subfloor. Can I use Roberts 1407 on top of Drylok floor Waterproofer?
      by|Jan 26, 2024
      1 Answer
      Answer This Question

      A:  No, Roberts 1407 is specifically recommended for use on grade and above grade. You may want to consider Roberts 1550 all in one wood flooring adhesive for use with engineered wood flooring below grade(basement). Roberts 1550 is not recommended for use in conjunction with drylok waterproofing material.

      by|Jan 26, 2024
        caret
        Q:My goal is to install 3/4" thick X 11" wide blue pine slabs on top of treated ply sills (ICF walls). They are a bit rough. I'm hoping to fill, level, and glue in a single application. Will the 1407 work in this application?
        by|Jan 22, 2024
        1 Answer
        Answer This Question

        A:  Great Question. No. Roberts 1407 is a waterbourne product and is not recommended for wide plank install.

        by|Jan 23, 2024
          Showing 1-4 of 142

          Customer Reviews

          4.4 out of 5

          • 4.4 out of 448 reviews
          • 82% recommend this product
          Filter by:
          Showing 1-10 of 448 reviews
          I am glad I did my research about glue for engineer hardwood floors. Robert’s 1407 it’s a great product. Easy to clean, easy to use.
          by
          • Verified Purchase
          Glue every where
          I’m sure the product does what is intended (have not used it yet) but all three boxes had glue all over them
          by
          Response from The ManufacturerJun 13, 2023
          Thank you for letting Roberts know about your experience. This information can be used to better service customer needs. QEP
            • Recommended
            1 found this review helpful
            Be Careful
            this product is NOT for high quality work, inflate the wood, damage the pre-cast steps
            by
            Response from The ManufacturerFeb 26, 2021
            Roberts understands installations can be difficult. Please review 1407 product information for a better understanding of performance. This product is not recommended for engineered wood flooring that is >1/2" thick, more than 5" wide, or for solid wood flooring. You may want to consider a polyurethane 100% solids adhesive specific to wide board tread application. QEP
              2 found this review helpful
              I needed to glue down approximately 35 linear feet of...
              I needed to glue down approximately 35 linear feet of hardwood flooring. Two tubes was the perfect amount!
              by
              • Verified Purchase
              1 found this review helpful
              It holds my floor together great and it didn't take long to dry.
              It holds my floor together great and it didn't take long to dry.
              by
              • Verified Purchase
              • Recommended
              product was easy to use Easy to apply and easy to clean and did the job well
              product was easy to use Easy to apply and easy to clean and did the job well
              by
              • Verified Purchase
              • Recommended
              Good product
              Good product
              by
              • Verified Purchase
              • Recommended
              Using this product to install Bruce Engineered Hardwood over cement throughout the house. It is...
              Using this product to install Bruce Engineered Hardwood over cement throughout the house. It is adhering great to give a secure floor connection. Clean up is fairly easy with soap and water. The only issue is if it is humid or rainy on install days there is a lot more tackiness (sticky feel) on the floors and drying time is extended. Shoot for install on a low humidity day.
              by
              • Verified Purchase
              • Recommended
              1 found this review helpful
              Used a lot more glue than we thought we would have, like ALOT MORE. Other than thought turned out...
              Used a lot more glue than we thought we would have, like ALOT MORE. Other than thought turned out awesome!
              by
              • Verified Purchase
              • Recommended
              1 found this review helpful
              Easy clean up- great to work with
              Easy clean up- great to work with
              by
              • Verified Purchase
              • Recommended
              Showing 1-10 of 448 reviews

              Compare Similar Items

              current item

              Maximum Coverage Area (sq. ft.)

              80 sq ft

              500 sq ft

              140 sq ft

              Flooring Material Features

              Latex based, Solvent free, Water based

              Solvent free

              No Additional Features

              Location

              Floor

              Floor

              Floor