RYOBI introduces the Impact Rated Driving Kit (70-Piece). RYOBI Impact Rated Driving Bits are built to withstand the tough demand that comes with the use of an impact driver. The 2 in. bits feature a TORSION ZONE that is engineered to absorb the high torque and demand that comes with the use of an impact driver. The included case is compact and modular, meaning the bit holders can be removed or rearranged. This allows for complete customization of accessory kits. This 70-piece kit offers a variety of the most commonly used 1 in. and 2 in. bits, along with specialty socket adaptors, nut drivers and magnetic screw guide. For more things RYOBI, visit RYOBItools.com.
Impact Rated bits for use in impact drivers and drills
Precision-milled bit tip for enhanced fitment with commonly used fasteners
2 in. bits feature a TORSION ZONE that absorbs the high torque from more demanding applications and helps to preserve bit tips
1 in. bits are great for use with the included magnetic bit holder
Modular case for easy, convenient storage
Green band on bits makes it easier to find on the jobsite and in your toolbox
Nut drivers for use with hex fasteners
Includes: (70) Impact Rated Bits in a variety of socket adaptors, nut drivers, Philips bits, and bit holders
Don't waste your money! I just bought a Rigid tool set which included an impact and I needed impact rated bits. Broke both socket adapters trying to get 1 bolt off.
Main reason I bought this set was the socket adapters!!
Had to use hand tools to get the bolts off since I didn't have anymore socket adapters.
by
Response from RYOBIMar 28, 2022
Hello, Dstundra - We're very sorry to hear that both socket adapters broke during the first use! Will you please email us at Reviews@RYOBItools.com? It would be great to speak with you so we can try and make this right!
Dec 18, 2021
Not impact worthy…soft apex tips. Nice selection of impact tips...
Not impact worthy…soft apex tips. Nice selection of impact tips but they don’t hold up. The pic of the Phillips tip was after driving six wood screws into partial board and sub floor (yes, the driver was plumb) and my overdriven. Not only this tip but every other one has failed prematurely.
by
Response from RYOBIDec 21, 2021
Hello, Bmac - We're very sorry to hear about your disappointing experience with these driving tips! Would you mind sending us an email at Reviews@RYOBItools.com? We'd like to continue this conversation so we can try to turn your experience around.
Oct 26, 2021
Great starter kit for impact drills
This comes with a lot of different bits. None have broken over the past year of heavy usage. My only complaint is there are not enough different sized hex bits and way too many flat head bits.
by
1 found this review helpful
Aug 6, 2021
Complete junk
I bought these to go with my new Ryobi 18v Cordless Impact Driver. I went to work on a new project of putting together a new work bench. I used 2X4's and Simpson Strong Tie connectors. On the very first use trying to put in a Simpson Strong Tie Wafer Head Screw it completely destroyed one of the drives. Tried a second drive and it too got damaged. So I tried to use a SPAX screw with a T20 head. Destroyed that bit too. I will not be buying these bits again and do not recommend them at all.
by
5 found this review helpful
Jul 24, 2021
DONT WASTE YOUR MONEY
Not worth it. They are made cheaply and they dont last. I got to use each phillips head bit once and they became damaged. I have been ising power tools for many years and never came acrossa name brand tool tjat was made so cheaply.
by
Recommended
4 found this review helpful
Jul 2, 2021
2 Hours, Already Broken
The 1/2 inch adapter broke 2 hours after I purchased the set. Quality is a concern.
by
7 found this review helpful
Jun 16, 2021
quantity over quality, 2.5 ruined in 30 minutes
On my very first use of these drivers I fully chewed through 2 philips drivers and started on a 3rd; the project I was working on was not anything out of the ordinary (putting table legs on a butcher block) and I got about 5 screws out of each before they would do nothing but slip and strip. I would only recommend using these for putting together something with no resistance.
by
2 found this review helpful
May 12, 2021
Very low quality
Bits are not strong enough. They snap on first use. Not worth
by
2 found this review helpful
Apr 21, 2021
Great kit comes with many bits and all magnetic for cheap. Perfect.
Great kit comes with many bits and all magnetic for cheap. Perfect.
by
Recommended
Apr 16, 2021
So I did like the price and assortment of bits, as well as the box. But 1st time buying I had mu...
So I did like the price and assortment of bits, as well as the box. But 1st time buying I had multiple times bits just shear off, or twist on first use. In pre-drilled pine 2x4 wood Phillips screws. Screws were fine, bits broke. After the 3rd bit I had to go exchange the whole set just to finnish the project. Second box held up as one would expect, no broken bits, and held up even when breaking a screw and not the bit.
I may have gotten just a bad run in the first box, but time will tell on the second. I only recommend if you get the box on sale, and of course have better luck of the draw where they are fine and work.