$undefined.00 /mo* suggested payments with months* financingApply Now
Cordless PVC and PEX Cutter Cuts PVC up to 2 in. thick
PEX Crimp Ring Press Tool Includes: Go/No Go Gauge and Belt Clip
Over 260 ONE+ Tools – All Work With Any RYOBI ONE+ 18V Battery
RYOBI introduces the 18V ONE+ Pex and PVC Shear Cutter for 1/4 in. to 2 in. and PEX Crimp Ring Press Tool (Tools Only). The 2 in. stainless steel blade allows clean cuts from 1/4 in. to 2 in. thick in plastic tubing. This blade is also replaceable for continued performance. Featuring a quick blade release and a tool-free, one button blade change, this tool provides users with maximum efficiency. Power is no problem when pairing this ONE+ PVC and PEX Cutter with a ONE+ 2.0 Ah Battery (not included), providing 300 cuts on a single charge. The 18V ONE+ PEX Crimp Ring Press Tool provides 320 crimps per charge (with the ONE+ P108 4.0 Ah LITHIUM+ Battery, not included) and an easy one-handed crimping operation, the Crimp Ring Press Tool eliminates user fatigue and allows you to get the job done faster. The crimp cycle takes less than 5 seconds with an LED light to indicate completion. Best of all, it is part of the RYOBI ONE+ System of over 260 cordless tools that all work on the same battery platform. Backed by the RYOBI 3-Year Manufacturer's Warranty, this kit includes an 18V ONE+ Lithium-Ion Cordless PVC and PEX Cutter, an 18V ONE+ Lithium-Ion Cordless PEX Crimp Ring Press Tool with a Go/No Go Gauge, a Belt Clip, 1/2 in. and 3/4 in. Press Die Inserts and Pouch, and an operator's manual. Battery and charger are sold separately.
PVC and PEX Cutter: Cuts up to 2 in. PVC
PVC and PEX Cutter: 300 cuts on a single battery charge using a P190 RYOBI 18V ONE+ 2.0 Ah Battery (battery not included)
PVC and PEX Cutter: Replaces cumbersome manual cutters providing user convenience
PVC and PEX Cutter: Stainless steel blade for quick, clean, burr-free cuts
PVC and PEX Cutter: Quick blade release for increased productivity
PVC and PEX Cutter: Tool free, one button blade change
PVC and PEX Cutter: Open/Close trigger for easy operation
PVC and PEX Cutter: LED light to illuminate cutting surface
PEX Crimp Ring Press Tool: Easy one-handed crimping operation
PEX Crimp Ring Press Tool: 320 crimps per charge using a P108 4.0 Ah LITHIUM+ High Capacity Battery (not included)
PEX Crimp Ring Press Tool: LED lights indicate complete clamp cycle
PEX Crimp Ring Press Tool: Dual LED lights to illuminate work space
PEX Crimp Ring Press Tool: Less than 5 second crimp time for maximum efficiency
PEX Crimp Ring Press Tool: Meets ASTM F1807 plumbing standard
Part of the RYOBI 18V ONE+ System of over 260 cordless tools
3-year manufacturer's warranty
Includes: (1) P593 18V ONE+ PVC and PEX Cutter, (1) P661 ONE+ PEX Crimp Ring Press Tool, Go/No Go gauge, belt clip, 1/2 in. and 3/4 in. press die inserts and pouch, and operator's manual
Q:Mine cuts crooked. It's a smooth cut but angles to the right every time. The blade feels loose. Is everyone's like this or did I get a dud?
by|Nov 27, 2022
Answer This Question
Q:Will this work on electrical pvc conduit?
by|Nov 26, 2022
Answer This Question
Q:So it comes with 1/2 3/4 where can I get the one 1 and the 3/8?
by|Nov 12, 2022
Answer This Question
A: Hello, Tony - Thank you for your question. They can be purchased from Gardner at 877.634.5704. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the ONE+ 18V PEX Crimp Ring Press Tool (Tool Only). - Jewel
by|Nov 16, 2022
Q:Will this cut class 200 irrigation pipe without cracking it?
by|Jun 14, 2022
Answer This Question
A: Hello, Vincent - Thank you for your interest in the ONE+ 18V Lithium-Ion Cordless PVC and PEX Cutter. This product is best for cutting PEX, rubber hoses, and non metallic conduits and cutting PVC and CPVC pipes. In low temperatures, pipes can become brittle and crack easily. Cutting pipes in temperatures below 40°F is not recommended.
Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. I hope this helps! --Jewel
by|Jun 15, 2022
Showing 1-4 of 48
4.3 out of 5
out of 200 reviews
82%recommend this product
Showing 1-10 of 200 reviews
Sep 5, 2020
Pure Garbage! If you need to make a quick cut for a diy project in which the pipe serves a purpos...
Pure Garbage! If you need to make a quick cut for a diy project in which the pipe serves a purpose other than to carry water your golden. If your intention is to use this to make a straight cut you are better off using a jagged rock! I went through 5 feet of 2" PVC to try and get a straight cut and did not get close, I even sharpened the blade. At the end I noticed the blade has too much play to be able to do anything straight.
3 found this review helpful
Jun 18, 2020
Doesn't cut straight
Have been looking for a good PVC cutting tool and came across this one. Looked sturdy and I already have the Ryobi 18V battery. I made the purchase at the store today and came home to do a few test cuts. I tried about 6 cuts on 1-1/2" Schedule 40 PVC and it just can't make a straight cut. It's off by 1/4" on every cut. 1/2" pvc not so bad. Ryobi, is this a defective unit or has it just not been field tested?
9 found this review helpful
Jun 7, 2020
We cut a lot of PVC pipe on our ranch, so this tool came in handy. It did not come with the batte...
We cut a lot of PVC pipe on our ranch, so this tool came in handy. It did not come with the battery or charger, which are different from other Ryobi batteries and chargers, so we had to wait until we could get that to try it out. (2 weeks due to COVID-19 affecting delivery). It is easy to operate. Note the pictures on the insert, which shows this more clearly. It has an easy-release button so it doesn't stick. It cuts fast and clean.
Let's start with the one draw back I had, it's a bit large for some of those undercabinet, smalle...
Let's start with the one draw back I had, it's a bit large for some of those undercabinet, smaller spaces. Now from there nothing but Great !, cut out my old sprinkler valve plumbing in nothing flat, as was cutting all the sections to plumb all the elbow and tees for the new valves. What a time saver.
Now we cut only Schedule 40 PVC Pipe 3/4 inch. Also cut a piece of 1 1/4 inch no problem and standard PVC 3/4 which seam to flexible and in one case broke before it cut.
Features are, the trigger operates the blade both ways and there's a quick release on the side that opens the blade manually. The safety trigger guard takes a few to get the hang of, but one thing for sure if you even a bit-release your grip it stops. This is great. LED light to illuminate cutting surface, 3-year manufacturer's warranty.
Includes: (1) P593 18-Volt ONE+ PVC and PEX Cutter and an operator’s manual --TOOL ONLY--
This is only the tool but we had a Ryobi base already, however, it wasn't the right one, so back ...
This is only the tool but we had a Ryobi base already, however, it wasn't the right one, so back to Home Depot to get the base which was expensive but worth it. Putting in piping at a friend's cabin and this was excellent. Cuts through the larger PVC and the Pex without damaging, especially without crushing even the smaller PVC piping. Would have given this 5 stars but concerned about the plastic casing not being as durable as other cordless tools.
Ryobi 18V cordless PVC/Pex cutter is a great option for my hydroponic setup. Cutting that much P...
Ryobi 18V cordless PVC/Pex cutter is a great option for my hydroponic setup. Cutting that much PVC for supply lines and drains with mechanical cutter would be very hard on my arthritic hands. I mistakenly thought one of my older compact Ryobi batteries would work with this cutter but find I must use the One+ 18V batteries. So I've ordered a new 2.5 Ah battery and charger. So I wasn't able to operate the tool for review, but can say the tool itself if substantial. It has a heft of weight to it and is substantial in build. I'd caution on the combined weight of the tool and larger battery. The design of the cutting end should hold the PVC securely and provide a straight cut. And the size of the blade and cutting area is easily large enough to accommodate a full 2 inch piece of material. The blade easily releases to open position and can be manually closed with a large green button. Instructions are helpful and clear. I'm happy more and more unique hand tools are being added to Ryobi's One+ system.
The Ryobi PVC/PEX cutter has been a great addition to my shop. Practical and straightforward, I u...
The Ryobi PVC/PEX cutter has been a great addition to my shop. Practical and straightforward, I use it to cut up to a 2-inch pipe. I have used it to cut washers out of PVC and pipe for my dust collection. It is over 5lbs with a battery, so not light, but this is not something I would be carrying around. It is built well, quiet, and has an all-metal jaw upfront. The only thing I wish they would have done differently is the LED. The LED is on or off. There is no light switch and the handle like there other tools, so the LED only operates when pulling the trigger, and the cutter is moving. This makes it pretty useless if I am trying to line it up for a cut in low light situations. I could hold the trigger to open the jaw, and the light would stay on, but the blade makes a popping sound, and it does not seem good for the tool.
Easy to use.
The blade is changeable.
The jaw has a quick open feature.
Easy to use safety switch.
Solid metal jaw.
Excellent and clean cuts.
the LED can only be activated when the jaw is moving.
No belt hook or rafter hook. Not even an option to add one.
The packaging is a little off-putting.
Well worth it, if you cut a lot of PVC or PEX, this makes the job very easy. I leave my hacksaw or manual cutters in the drawer now.
If you have ever cut PVC pipe, you can now get rid of your old hand cutters with this power PVC p...
If you have ever cut PVC pipe, you can now get rid of your old hand cutters with this power PVC pipe cutter. Unless you get an extra large hand cutter, most of the hand cutters only cut up to 1-1/2" pipe or smaller. This Ryobi power cutter cuts up to 2" pipe. When using a ratchet hand cutter the cut usually ends up at an angle and not very square. This cutter squares the cuts much more precisely than the hand cutters.
The speed at which it cuts is much faster than I would have imagined. A 1-1/4" pipe cut takes about 1 to 2 seconds if that. I have made about 50 cuts so far and the batter still shows 3/4 charge. The blade seems to remain just as sharp as the first cut and if it ever needs sharpening or replacement, it pops out very easily with a one button release.
I have the beginning of arthritis in my right hand and this has and will save me a lot of time, effort and pain with projects cutting PVC. If you have any projects or jobs with a lot of cuts this is well worth getting.
The new Ryobi 18-Volt one+ Pex and PVC Shear Cutter for is designed to help users cut up pipe fro...
The new Ryobi 18-Volt one+ Pex and PVC Shear Cutter for is designed to help users cut up pipe from 1/4inch up to 2inches in Diameter with ease over the use of a manual shear cutter. It is also part of the full 125 cordless tool system that Ryobi has put together that all use the same battery platform . So you only have one battery for all tools and one type of charger. Each tool comes with a 3 year Manufactures Warranty . This is a tool only purchase , Battery and charger are sold separately. See the vid below for a demo of the product in real life from my you tube channel .
This is a very impressive tool. I've performed plumbing jobs for decades and installed PVC (and P...
This is a very impressive tool.
I've performed plumbing jobs for decades and installed PVC (and PECS) for both drainage and electrical. Performing those jobs, we used a ratcheting hand tool to cut our PVC tubing. And it worked just fine except if you had a lot of tubing to run your hand could get pretty tired.
Enter this Ryobi PVC & PEX tube cutter. If you already own any Ryobi 18 volt, One + power tools you're ready to go since this uses the same batteries. I used the 2 AH battery here but it will accept the 3AH and 4AH batteries as well.
The tool description states it will cut 1/4 inch through 2 inch tubing but I was able to cut 21/4 inch tubing cleanly slicing off a section about 1/4 inch thick.
The tool has 2 buttons on it's right side that you can see in my pictures. The first (larger) button is a sort of ratcheting closer that brings the cutter a little closer to the piece you want to cut without having to hold the trigger the whole time. It is very handy to get the blade closer to your work and each press of the button closes the tool in increments. The second (smaller) button is a quick release for the blade to allow you to sharpen or replace the blade quickly. But I don't imagine one will need to use this often as the blade is made of a heavy stainless and resists dulling quite well.
The only thing I didn't like is the trigger which has a release that needs to be pulled down before the trigger can be pulled. Clearly prevents you from pulling the trigger prematurely and helping prevent accidents. But the trigger itself is a little difficult to pull (stiff) and in some cases I needed to hold the gun with one hand while pulling the trigger with the other. Again, this is likely a safety feature as I imagine the blade could cut through materials you wouldn't want to cut lest you risk a trip to the hospital. But I only found this a minor inconvenience since it caused me to slip off my cut mark a couple times. But I have all my fingers so It's an acceptable inconvenience. And my old ratcheting hand held tube cutter may go to the garage sale.