Internet #202855392

Model #434-BF-3SS

Store SO SKU #626150

30 in. H x 3 in. W x 23 in. D Pull-Out Between Cabinet Base Filler with Stainless Steel Panel

  • Turn otherwise wasted space into useful storage
  • Intended for new kitchen cabinet construction not existing
  • Accessory hooks included
  • See More Details

Frequently Bought Together

+
+
Price:
$21599

Product Overview

Rev-A-Shelf's fillers revolutionized otherwise wasted space in your kitchen. Normally a "filler" or extra space is simply covered up with a decorative front, but with Rev-A-Shelf's line of fillers, it turns that otherwise wasted space in to useful space. Fillers are intended to be installed in new kitchen cabinet construction and will not work in existing cabinets. The 434 Series is available for 3" and 6" widths and features a magnetic stainless panel that includes multiple hooks and pegs for multiple configurations.
  • (1) Wood filler, magnetic stainless steel panel, assorted pegs and hooks and mounting hardware
  • 100lb Full-Extension Ball-Bearing slide system
  • Fillers do not go inside of a cabinet, they install in-between cabinets
  • Note: Fillers can only be installed between two cabinets during new cabinet construction
  • Assorted hooks and pegs for multiple configurations included
  • Door Mount brackets included
  • Attractive wood construction with durable clear finish
  • Comes fully-assembled and ready to install
  • Limited lifetime warranty
  • Image shown is of 6 in. model; actual unit is 3 in.



Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Pull Out Cabinet Drawers

30 in. H x 6 in. W x 23 in. D Pull-Out Between Cabinet Base Filler
current product
30 in. H x 3 in. W x 23 in. D Pull-Out Between Cabinet Base Filler with Stainless Steel Panel
4.25 in. H x 22 in. W x 19.31 in. D Wood Pull-Out Tambour Table30 in. H x 6 in. W x 23 in. D Pull-Out Between Cabinet Base Filler with Stainless Steel Panel
BrandRev-A-ShelfRev-A-ShelfRev-A-ShelfRev-A-Shelf
Name30 in. H x 6 in. W x 23 in. D Pull-Out Between Cabinet Base Filler30 in. H x 3 in. W x 23 in. D Pull-Out Between Cabinet Base Filler with Stainless Steel Panel4.25 in. H x 22 in. W x 19.31 in. D Wood Pull-Out Tambour Table30 in. H x 6 in. W x 23 in. D Pull-Out Between Cabinet Base Filler with Stainless Steel Panel
Price
Add to Cart to See Price
$21599
$22910
$28758
Ratings
(9)
(3)
(1)
(3)
MaterialWoodWoodWoodWood
FeaturesAdjustable ShelvesNo Additional FeaturesNo Additional FeaturesNo Additional Features
StyleModernModernClassicModern
Product Width (in.)6 in3 in22 in6 in
Product Depth (in.)23 in23 in19.31 in23 in
Slide SystemBall BearingBall BearingRegularBall Bearing
View ProductView ProductView ProductView Product

Specifications

Dimensions

Minimum Cabinet Opening (in.)
3
Product Depth (in.)
23 in
Product Height (in.)
30 in
Product Width (in.)
3 in

Details

Color Family
Unfinished Wood
Features
No Additional Features
Hub Required
No hub connection available
Included
No Additional Items Included
Kit
No
Kitchen Product Type
Pull-Out Organizers
Material
Wood
Recommended Use
Inside Cabinet
Returnable
180-Day
Slide System
Ball Bearing
Style
Modern

Warranty / Certifications

Manufacturer Warranty
Limited Lifetime Warranty

Questions & Answers

11Questions12Answers

Can I hang utensils on both sides of the metal panel, or do I have to choose the left or right si...

Asked by Noelle216 February 24, 2017
2
Answers

You have to choose a right or a left side.

What if I wanted to install 2 units side by side?

Asked by kt July 12, 2016
2
Answers

You can install two units side by side.

does this get attached to the side of ONE cabinet only? Will it only be "fixed to one side of the adjacent cabinets?

Asked by Herbie February 21, 2016
1
Answer

That is correct. Please remember that filler can only be installed in a new cabinet installation. This product does not go into a cabinet, but rather in-between (2) cabinets. You would simply install in-between and install with screws. The product is full assembled and ready to install with only a few screws. Once installed simply push your other cabinet up against and attach the cabinet to the filler with some more screws to secure it.

Can the stainless steel panel be instaled on either the left or right side of the pull-out filler?

Asked by amg October 14, 2015
1
Answer

The panel can be installed on either side.

If the unit is 9 inches wide, does the cupboard opening need to be greater than 9 inches wide?

Asked by Colleen May 13, 2016
1
Answer

The minimum width must be 9" and should work in your 9" opening.

Where do I get the door panel that goes on the filler?

Asked by DLM April 12, 2017
1
Answer

I'm sorry for any confusion you may have, but Rev-a-Shelf has never supplied cabinet doors as we would never know what style, color, material or even what manufacturer built your cabinets. Kitchens are usually built in 3" and 6" increments. Many times designers will have a 3" gap that is left over in the design phase and they would normally just cover up with a piece of matching material that matched your cabinets. This filler actually fills the otherwise void by giving you a usable organizer to use. The customer or designer will still supply the cabinet front. Thsi is why we say that this is recoomended for new cabinet construction only.

How long, or wide depending on how you look at it, are the slide tracks at the bottom? The track...

Asked by zorro December 14, 2018
1
Answer

Product Height 30 inches. Product Width 6 inches.

Can this be mounted between a stove and refrigerator?

Asked by Diane April 3, 2016
1
Answer

The filler needs something to attach or screw into. I will assume that you will not be able to screw into your refrigerator or stove, so you will have to modify something on your own.

REMOVED BUILTIN RANGE PUTTING 30" STOVE IN A 331/2 OPENING CAN I PUT THIS NEXT TO EXISTING CABINET AND ADD A PIECE OF WOOD PUTTING NEW COUNTER TOP ON

Asked by CRICKET March 14, 2016
1
Answer

I think I understand your question. A filler was designed to slide between 2 cabinets not inside of a cabinet. If you want to put a filler on the end of a cabinet run you could but would need to cover one side up so it matches your cabinets.

can this be mounted in between a cabinet and under cabinet mounted wine refrigerator?

Asked by Daniel March 7, 2016
1
Answer

I am going to say yes, but hard to say. This filler really only needs to be screwed to one of the cabinets, so you should be fine.

30 in. H x 3 in. W x 23 in. D Pull-Out Between Cabinet Base Filler with Stainless Steel Panel - page 2

Customer Reviews

  • 3 Customer Reviews
  • 4 out of 5 stars overall
100% of customers recommended.
Overall Ratings
5star-icon(2)
4star-icon(0)
3star-icon(0)
2star-icon(1)
1star-icon(0)
Sort By:
The quality of these revashelf products are outstanding. However, I bought this product in order ...
The quality of these revashelf products are outstanding. However, I bought this product in order to use on the right side of my oven. This is a left-handed one so I couldn’t use it. I thought it might be reversible but it was not. The description did not say it was only a left side pull out. Pictures show that it’s both. I was disappointed.
Was this helpful?
0
0
This was built better than I expected and easy to install. We have had it about 2 weeks and I lov...
This was built better than I expected and easy to install. We have had it about 2 weeks and I love it. There are plenty of hooks to hang items.
Was this helpful?
0
0
Grand Haven, MI, USA
Excellent use of space!
Quality :
5
Value :
5
Easy to install and work with! Looking forward to years of use!
Was this helpful?
1
0
Review this Product
Share your thoughts with other customers