Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Kerdi-Seal-MV is a prefabricated waterproofing seal with over-molded rubber gasket. It is designed to protect moisture sensitive backing panels at the mixing valve in Kerdi Shower installations. The KMSMV235/114 has a 4-1/2 in. mixing valve opening.
Product Length (in.) | 9.25 in |
|---|---|
Product Length x Width | 9.25 in. x 9.25 in. |
Product Width (in.) | 9.25 in |
Color Family | Orange |
|---|---|
Drain Location | Center |
Drain Material | Drain Not Included |
Drain Type | Drain Not Included |
Flooring Product Type | Underlayment |
Flooring Type | Ceramic, Porcelain, Stone, Tile |
Material | Polyethylene |
Pack Size | 1 |
Returnable | 90-Day |
Manufacturer Warranty | 10 Year Limited Warranty |
|---|
This is designed for a round mixing valve area with a 4½", for a 1/2" pipe seal look at model KMS172/12 and for a 3/4" pipe seal model KMS172/20. For more detailed information please feel free to reach out to us at 1-800-472-4588.
I would suggest that you call Schluter Systems’ customer support line at 1-800-472-4588 to discuss in detail.
Either way would be okay. Top it off on the exposed side with a final layer of the waterproofing membrane.
It is very difficult to answer a question like this without more details. I would suggest that you call Schluter Systems’ customer support line at 1-800-472-4588 to discuss a solution it greater detail.
The seal is about 1/2 inch (13mm). As far as I know Schluter doesn’t have any extended seals.
Yes unmodified thin set.
Yes. Then you put the tile on the Kerdi board.
Yes that’s exactly right use thin set you can either do it before you tile or while you are setting tile I like to do it before so I don’t have to deal with it while I’m putting up tile but either way works.
I just used yesterday. Very easy to use but time consuming. I watched a lot of videos and the instructions say to use a non modified thin set mortar
You put the Kerdi seal on with unmodified thin set, just like you do on the Kerdi board.
Yes, I have. Just make sure you put thinset between the backerboard and the Valve seal and you are good to go. Very easy to use and install.
I installed my Kurdi system over to gypsum. So my guess is it would work. Use on modified mortar. I am by no means a shower installer. But with that said I found the Kurdi system very easy to use.
Yes I install 2 on Hardy Backer material and is a perfect material for adhesion. Was applied very securely
Viewing 1-6 of 6
4.8 out of 5