1 in. Liquidtight NM Straight PVC Conduit Fitting Connector (10-Pack)

I don't see any Southwire products that work as a 90-degree coupler (they do have an inline coupler, but that was it). Southwire does have a 90-degree SIMPush elbow (with a removal access panel to help with pulls). SIMPush works kind of like a Sharkbite fitting for plumbing. But I think it only works for rigid conduit? You might find a 90-degree coupler from another manufacturer though. Halex, for example, although I still only see inline couplers from them.

1/2 in. straight = 0.875 in. clearance hole 3/4 in. straight = 1.090 in. clearance hole 1/2 in. sweep = 0.875 in. clearance hole 3/4 in. sweep = 1.109 in. clearance hole

Pretty much any weather proof 1 gang box, regular or deep would work. For a GFCI installation, I would recommend a deep I gang weatherproof box. For a blank cover, use any 1 gang weatherproof cover. You will find these items together in one location for electrical weatherproof boxes, covers, etc. Choice of color is available also.

This is gray.

Dear Valued Home Depot Customer, to better answer your question, please contact our HD.com customer service department at 800-430-3376 call any day between 6 a.m. and 2 a.m. EST, or call your local store, they can either answer your question or transfer you to your local store to answer your specific question

The 1-1/4" measurement refers to the conduit size.

Hi rjrc. Thank you for your question. This connection is not rated for underground use. The 3/4 in. x 10 ft. PVC Schedule 40 Conduit is designed to route electrical wire above and below ground and features heat and corrosion resistance for longevity providing all connections are properly sealed. https://www.homedepot.com/p/Weld-On-16-oz-PVC-700-Low-VOC-Cement-in-Clear-10080/202309205 https://www.homedepot.com/p/JM-eagle-3-4-in-x-10-ft-PVC-Schedule-40-Conduit-67454/100129197 Please let us know if we can be of further assistance. Rick_HD_OC

Both sides are shown in the alternative images. The "other side" is shown in images 2,3, and 4. We do not currently have an image of the fitting connector seated, but will reach out to our marketing team to see if this could be an addition. The above advice is based upon the current edition of the National Electric Code (NEC). Free access to the latest version of the NEC is available online at www.nfpa.org/freeaccess. The NEC and local building codes regulate the types of wire and cable that can be used in specific electrical applications, as well as the manner of installation. Check your local building codes before you start any wiring and cable electrical project and be sure to obtain required permits. When your work is complete, always have it inspected for compliance with local codes to ensure that it has been safely installed.

Yes, the conduit connector is not weatherproof.

1/2”, the threads are 1/2” NPT