Internet #310806340

Model #OL04051696OR

1 in. x 6 in. x 8 ft. Red Oak S4S Board (2-Pack)

  • Perfect for accent walls and other DIY projects
  • Can be primed then painted/sealed then stained
  • Meets the highest grading standards for strength and appearance
  • See More Details

Product Overview

Every solid Red Oak piece meets the highest grading standards for quality, strength and appearance. Perfect for interior use from a practical as well as an aesthetic point of view nothing else has such timeless good looks or provides such a sense of well-being. This fine American classic hardwood can be used for shelving, cabinets or custom furniture pieces. These boards can also be used for hobby projects, wine cellar shelving or general finish work. This 2-piece pack gives you exactly what you need for any project.
  • Boards come from sustainably managed forests and are of the highest-quality available
  • Practical way to bring warmth and beauty to any project
  • Stable and durable to last a lifetime
  • Solid Appalachian red oak
  • California residents

Compare Similar Hardwood Boards

current product
1 in. x 6 in. x 8 ft. Red Oak S4S Board (2-Pack)
2 in. x 2 in. x 8 ft. Red Oak S4S Board (2-Pack)1 in. x 8 in. x 8 ft. Red Oak S4S Board (2-Pack)2 in. x 6 in. x 8 ft. Red Oak S4S Board
BrandSwaner HardwoodSwaner HardwoodSwaner HardwoodSwaner Hardwood
Name1 in. x 6 in. x 8 ft. Red Oak S4S Board (2-Pack)2 in. x 2 in. x 8 ft. Red Oak S4S Board (2-Pack)1 in. x 8 in. x 8 ft. Red Oak S4S Board (2-Pack)2 in. x 6 in. x 8 ft. Red Oak S4S Board
Nominal Product Length (ft.)8888
Finish TypeUnfinishedUnfinishedUnfinishedUnfinished
Board Joint TypeSquare EdgeSquare EdgeSquare EdgeSquare Edge
MaterialRed OakRed OakRed OakRed Oak
Nominal Product Thickness (in.)1212
View ProductView ProductView ProductView Product



Actual Product Length (ft.)
Actual Product Thickness (in.)
Actual Product Width (in.)
Coverage Area (sq. ft.)
Nominal Product Length (ft.)
Nominal Product Thickness (in.)
Nominal Product Width (in.)


Appearance Board Type
Hardwood Boards
Board Joint Type
Square Edge
Fastener recommendation
glue and nails
Finish Type
Lumber Grade
Red Oak
Moisture content
Kiln Dried
Number Of Boards Per Pack

Warranty / Certifications

Manufacturer Warranty
90 day

Questions & Answers


Examples: How do I install this? What is the battery life? Does this come in black? Is this heavy...

Asked by CanyonD January 25, 2021

Heat them up with a hair dryer and they will peel right off. Sorry these are mandated in California.

Can these be steam bent

Asked by Novice January 21, 2021

It can – red oak is actually really good for steam bending, but it’s a process.

Can I get them cut to to 60 inch Length

Asked by Greg December 7, 2020

Hi Greg, Email me your order number to and I will take care of that for you. Thanks for reaching out.

Is this actual 1" 5/4 ?

Asked by Tony October 31, 2020

3/4” actual size.

Is this wood pressure treated?

Asked by Mae September 23, 2020

Hi Mae, This is not pressure treated it is Kiln Dried Oak at 6-8 pct moisture. Thanks for the inquiry.

Is this a pack of (2) 8-foot boards/16 feet total, or is it (2) 4-foot boards/8 feet total?

Asked by Cahnell May 21, 2020

2 boards that are 8' in length

are these 2 6 foot boards or 2 three foot boards

Asked by rich April 15, 2020

They are two 6 ft boards

Are these edge-glued boards, or are they each s single piece of wood?

Asked by JohnA April 1, 2020

Single piece of wood

How many actual boards come in this?

Asked by Sammy March 9, 2020


what mean 2 pack? how many plywood came in this price?

Asked by koleni January 26, 2020

Hi Koleni This item gives you 2 pieces of 1x4x8ft red oak solid hardwood lumber. Thanks for the inquiry.

1 in. x 6 in. x 8 ft. Red Oak S4S Board (2-Pack) - page 2

Customer Reviews

  • 4.5
    out of 63 reviews
  • 76% recommend this product
Filter by:
Showing 1-10 of 63 reviews
Lots of planer marks
I ordered this kit plus a 5 pack of 2' boards. See my review for the 5 pack under hat product. As a result of my 5 pack review I was worried about this order and when it arrived it had a number of corner dents. To the point I had to cut off ends shrinking my working space. Corners need better packaging. Otherwise the grain was good, the boards were straight, and no cupping or splits. However, once I started working them I noticed significant planer marks on the boards. I performed some significant sanding and still could not get them all out. Really this was a case of simply re-planing to be able to smooth the wood out. Planing marks are usually caused by dull blades or start and stops during the pass through. I used a black stain and polyurethane mix and you can clearly see the planer marks. I will live with it now as there is hours and hours of invested time on the project. I will never buy Oak online again and will either live without it or drive around until I can find it. Wood workers should be able to see these flaws and not send to customer. Pictures don't really show extent.
by Retnart
1 person found this helpful
A little disappointed in this order. Someone else said it best, its hard to depend on someone els...
A little disappointed in this order. Someone else said it best, its hard to depend on someone else if you cant go pick out the wood yourself due to shortages at local suppliers. 1 piece has a split, and 2 pieces don't match the other 3 and have a clearly darker tone and different grain pattern. Not sure if it was a different type, lot, tree, or what, but 2 had 1 type of sticker and the other 3 had a different type of sticker indicating possibly 2 different suppliers. They look nothing alike! Oak is not cheap and usually bought for long life projects and you typically want the grain, tone, and appearance to match. A piece I had at home matches the 3 better than what they sent so luckily the project is not a wash as I only need 4 pieces. I don't have time to be returning this wood. I am now worried about the 2 8 foot pieces being delivered tomorrow.....come on guys you could have matched the wood/grain better!
by Retnart
2 people found this helpful
The boards arrived very well packed, wrapped in plastic and then put into a very long cardboard box. The wood looks exactly as shown in the picture. So why is it not as advertised you ask?? THE BOARDS ARE ACTUALLY 11.75 X .75 X 8 !!! It is even labeled as 11.75 x .75 x 8 on the plastic wrapper around the wood. Don't waste your money and time. I plead you.
by Lukas
Response from Swaner Hardwood ExpertJul 12, 2020
Hi Lukas,
We are sorry for the confusion as 1x12 is the nominal size where if you scroll down on the item under specifications it states the actual size of 0.75 in. X 11.25 in. x 8 ft. Sorry for the confusion if you need actual 1” x 12” it would have to be a special order. Swaner
1 person found this helpful
Ensure you do not need 12" wide like the Product name indicates when actual width is only 11.25"
Quality looks great, milling is straight, excellent clean AB grading, however the width of the product is only 11.25" wide. Suggest you revise the Product name to 11.25" Wide Actual vs 12" as the product naming indicates. For my project will be installing Rogue Stringers for a wall mount squat rack to these, and the stringers are 10" Wide. Now if you do read the Specifications down below the product name, it does state 11.25" wide, just unsure why the Main Product Name would not outline actual width of 11.25, as its not even a 12" Nominal width.
by JayMieAtl
2 people found this helpful
This hardwood was perfect for shelves that I made. I routed and stained it ... turned out beautiful.
This hardwood was perfect for shelves that I made. I routed and stained it ... turned out beautiful.
by Txgunslinger
2 people found this helpful
I joined 4 of them to make my table top...
I joined 4 of them to make my table top and they were flawless, the only concern was the wood color that was not matched at all. That’s why I ordered double so I can match the color. Interesting that in every package of two boards one was red the other kinda brown.
Very unhappy with the UPC stickers
I ordered 64 linear feet of the 11 3/4 x 3/4 red oak, shipped to home. The material all arrived safely and undamaged and I found the quality of the wood itself to be ok. My dismay is that Swaner slaps two UPC/product_ID stickers on each board, right in the middle, about 20 inches from either end. I find these to be the stickers from Hades and nothing I did to remove them was either easy or left a totally satisfactory result. The stickers are completely superfluous when the product is shipped directly to the consumer. Breaks one's heart to see a fine piece of hardwood, done S4S very well, purposely sullied with adhesive in two places.
by CanyonD
Response from Swaner Hardwood ExpertJan 27, 2021
Hi CanyonD,
We are sorry for the issue with the UPC stickers as these are mandated by the state of California. The best way to take them off is to heat them up with a blow dryer and they peel right off. We are glad that you liked the Red Oak boards and again we are sorry for the UPC labels. Swaner
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Very pleased with wood.
Very pleased with wood.
Poor Quality
I ordered two (2) of this product and the first two boards were good but the third board was so bad it will end up in my scrap ben. This board had so many defects I do not understand how it got through your quality control ( if you have a quality control group). The planning of the board was so bad I could slide a 1/8" shim under a straight edge in many places along the surface.
by warjaq
Response from Swaner Hardwood ExpertJan 14, 2021
Hi warjaq,
Please email me at so that I can find out more about this and take care of you. We are sorry for the issue. Swaner
Showing 1-10 of 63 reviews