#1 Home Improvement Retailer

Internet # 203005208

Model # 971080

Store SKU # 971080

3/4 in. x 4 ft. x 8 ft. Prefinished Birch Plywood (Actual: 0.703 in. x 48 in. x 96 in.)

Limit 90 per order
  • Suitable for making cabinet components and furniture
  • UV prefinished board provides excellent stability
  • Comes with CARB II certification for reliable use
  • View More Details
Store
0 in stock
caret
Product Details
  • Suitable for making cabinet components and furniture
  • UV prefinished board provides excellent stability
  • Comes with CARB II certification for reliable use
About This Product

This hardwood plywood is perfect for interior use from a practical as well as an aesthetic point of view nothing else has such timeless good looks or provides such a sense of well-being. This fine hardwood plywood can be used for a wide range of applications including cabinet components, furniture, and much more. This plywood has been pre-finished with a UV coating on both sides and is ready to use.

Product ID #: 203005208Internet #: 728927005204Model #: 971080

Additional Resources

Shop All Swaner Hardwood
caret

Specifications

Dimensions

Actual Product Length (in.)96.000 inActual Product Thickness (in.)0.709 in
Actual Product Width (in.)48 inNominal Product Length (ft.)8
Nominal Product Thickness (in.)3/4Nominal Product Width (ft.)4

Details

Exposure DurabilityInteriorNumber Of PlyMulti-Ply
Panel/Veneer GradeC2Plywood FeaturesSanded, UV Prefinished
Plywood Product TypeHardwood

Warranty / Certifications

Manufacturer WarrantyNA
caret

Questions & Answers

44Questions
caret
Q:Would this be suitable for putting under a mattress and over the bars of a daybed, to help foam mattress?
by|Dec 22, 2023
1 Answer
Answer This Question

A:  yes

by|Dec 26, 2023
    caret
    Q:Can I apply water based polyurethane (general finishes high performance) over the factory finish?
    by|May 31, 2023
    1 Answer
    Answer This Question

    A:  Hi Pete -- if you're going to apply your own finish it would be better to purchase the unfinished birch panel. Adding another coat on top of the factory finish on the UV panel doesn't typically adhere well. Here's a link to the unfinished panel: https://www.homedepot.com/p/Swaner-Hardwood-3-4-in-x-4-ft-x-8-ft-Birch-Plywood-BBI6VI/305213039

    by|Jul 26, 2023
      1 found this answer helpful
      caret
      Q:The VENEER thickness, (not talking about the overall thickness), is NOT stated in the specs, what is the VENEER thickness?
      by|Apr 21, 2023
      1 Answer
      Answer This Question

      A:  .3mm

      by|May 1, 2023
        caret
        Q:What sheen is the finish on these, satin, matte or semi-gloss? Is it a water based finish? How much would I need to sand it to remove the finish and achieve a strong bond when gluing wood to it?
        by|Feb 22, 2023
        1 Answer
        Answer This Question

        A:  It is a UV based finish and we don't recommend sanding it off.

        by|Feb 24, 2023
          Showing 1-4 of 44
          caret

          Customer Reviews

          3.5 out of 5
          • 3.5 out of 124 reviews
          • 43% recommend this product
          Filter by:
          Showing 1-10 of 124 reviews
          A New Grade of Plywood - Dumpster Grade
          This plywood is garbage, the veneer is incredibly thin and not bonded to the panels, in fact the entire panel is riddled with holes. I bought one of these to cut doors out of for a cabinet and every piece had gaps and that was 6 pieces cut from a single sheet. Apparently the manufacturer decided to save money by skimping on the glue, there were sections that had several inch runs that were de-laminating due to a lack of adhesive. For almost $100 per sheet this is criminal.
          by
            10 found this review helpful
            Looks really bad
            Veneer peels off when you cut, sand, move, or touch it. The more you try to fix it, the more it falls apart.
            by
              9 found this review helpful
              So bad
              These boards are terrible! I edged them up with a router and the layers are SO bad. Literally the layers are overlapping in many places. These are bad… I’m happy in not a professional woodworker… it’s is just for fun for me, but I’m going to have to try to hide lots of sides and fill big holes… see pictures. For $90 a sheet these are scary bad
              by
                10 found this review helpful
                Love the Pre-finish
                Great for quick projects - already finished saves a lot of time for large surface portions of project
                by
                • Verified Purchase
                1 found this review helpful
                its OK for a work surface
                I picked up a sheet to replace an old workbench top. The prefinishing should be helpful with glue ups. I ripped the width down to 3’ and only saw one small void. There appear to be 10 layers of ply, with an outer layer and the veneer. Its pretty flat, but then maybe I got lucky.
                by
                  • Recommended
                  1 found this review helpful
                  This is the worst plywood I’ve EVER used
                  The veneer layer is too thin. Chips if you so much as sneeze on it. Tears out so easily it’s unavoidable, even trying to mitigate it with tape & technique. Absolutely disappointed to spend $90 a sheet for such terrible plywood & absolutely frustrated having to work with it. This is the worst plywood I have EVER used.
                  by
                    14 found this review helpful
                    Haven't got to actually start my project yet but what...
                    Haven't got to actually start my project yet but what I can see is a solid piece of plywood with no holes between plies. The veneer seems to be well secured and free of blemishes. The wood is heavy and will probably take the pocket holes and screws just fine for the storage cabinet I'm building for my SCUBA gear.
                    by
                    • Verified Purchase
                    made kitchen cabinet out of it
                    I dont know much sbout cabinet but i was tired of our low end kitchen cabinet so i decided to reface.
                    by
                      • Recommended
                      7 found this review helpful
                      Mde my project so much faster.
                      Mde my project so much faster.
                      by
                      • Verified Purchase
                      • Recommended
                      1 found this review helpful
                      Easy to work with
                      This birch is easy to paint or stain. There was a small scratch in one of the pieces, but I was able to sand it out without any demarcation. Good quality for the price!
                      by
                        • Recommended
                        1 found this review helpful
                        Showing 1-10 of 124 reviews