#1 Home Improvement Retailer

16 in. x 16 in. Fixed Stainless Steel Chimney Cap

$12551
Apply Now
Pay $100.51 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • 304 stainless steel construction ensures strong rust resistance
  • Oval hole mesh effectively prevents creosote accumulation
  • Supported by a lifetime warranty
  • View More Details
caret

Product Details

Forever Prefab Chimney Cap is a replacement cap for prefab factory builds chimneys, which have a wood or metal housing that surrounds the chimney flue pipe. Removable hood for easy cleaning. Standard 7 in. center hole with a 1/2 ft. lip, so water will not roll back down the chimney flue. Copper and custom sizes are also available.
  • 304-Stainless steel, lifetime warranty
  • Opening size of this chimney cap is: 16-1/2 in. x 16-1/2 in., this chimney cap will fit over chimney housing size: 16-3/8 in. x 16-3/8 in.
  • Heavy duty 24-Gauge stainless steel construction, animal proof 4 in. high screening, superior 3/4 in. oval hole mesh prevents creosote build up, 5/8 in. mesh is also available
  • The Forever Cap, nothing else even comes close
  • Return Policy

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?
caret

Customer Reviews

4.5 out of 5
(143)
  • 4.5
    out of 143 reviews
  • 92%recommend this product
Filter by:
Showing 1-10 of 143 reviews
Ok
Works for what it was intended, looks nice, better than two separate covers. The reason for four stars is it’s a little expensive for what it is.
by
  • Verified Purchase
  • Recommended
Not a lot to say. Measured the chimney so I knew what size to get. The cap fits over the outside ...
Not a lot to say. Measured the chimney so I knew what size to get. The cap fits over the outside of the chimney. Not directly on top. Has holes in it so you can screw it on to the chimney so wind can't blow it off. Keeps critters out of your chimney and allows good flow for smoke and gases to get out.
by
  • Verified Purchase
  • Recommended
The stainless steel is reasonably thick gauge and the overall construction seems sufficiently rug...
The stainless steel is reasonably thick gauge and the overall construction seems sufficiently rugged for its assigned task. The price is right, and it was the only chimney cap in the whole panoply of choices that was the right size. So it was either this one or get one custom fabricated. The aspect that annoys me: When assembled, the cap top edges are not close to being parallel to the bottom edges -- that is, they are sufficiently out of alignment that it is blatantly obvious close up, and you can even notice it from a distance post-installation. (Of course I have been pre-conditioned to notice it, so a random onlooker might not notice anything.) The holes in the cap through which one runs the bolts were punched are imprecisely located, and while there is some leeway for small shifting of the cap there is nowhere close to enough to fix the situation.
by
    • Recommended
    4 found this review helpful
    23 in. x 35 in. Fixed Stainless Steel Chimney Cap
    Very easy to assemble and and install, pleased with the appearance!
    by
    • Pro
    • Verified Purchase
    • Recommended
    3 found this review helpful
    Easy Assembly
    Comes flat in a box...easily assembled and installed!
    by
    • Pro
    • Recommended
    by
    • Verified Purchase
    by
    • Verified Purchase
    Easy to assemble and install
    Easy to assemble and install
    by
    • Verified Purchase
    • Recommended
    by
    • Verified Purchase
    by
    • Verified Purchase
    Showing 1-10 of 143 reviews

    Frequently Bought Together

    +
    +
    Price:
    $12551

    Compare Similar Chimney Caps

    15 in. x 15 in. Bolt-On Single Flue Chimney Cap in Black Galvanized Steel
    current product
    16 in. x 16 in. Fixed Stainless Steel Chimney Cap
    18 in. x 24 in. Fixed Stainless Steel Chimney Cap23 in. x 23 in. Fixed Stainless Steel Chimney Cap
    BrandHY-CThe Forever CapThe Forever CapThe Forever Cap
    Name15 in. x 15 in. Bolt-On Single Flue Chimney Cap in Black Galvanized Steel16 in. x 16 in. Fixed Stainless Steel Chimney Cap18 in. x 24 in. Fixed Stainless Steel Chimney Cap23 in. x 23 in. Fixed Stainless Steel Chimney Cap
    Price
    $9666
    $12551
    $17237
    $21707
    Ratings
    (125)
    (143)
    (143)
    (143)
    ShapeRectangularSquareRectangularSquare
    MaterialMetalStainless SteelStainless SteelStainless Steel
    Accessory TypeChimney CapChimney CapChimney CapChimney Cap
    FeaturesNo Additional FeaturesRust ProofRust ProofRust Proof
    View ProductView ProductView ProductView Product