#1 Home Improvement Retailer

Internet #100041510

Model #J-S-36

Store SKU #527207

Store SO SKU #100415

Super S Series 36 in. Jack Post

$5400
Apply Now
Pay $29.00 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Adjusts easily from 1 ft. 7 in. to 3 ft.
  • Ideal for sagging floors, basement beams or a secondary support
  • Compression load range of 18000 lbs to 16000 lbs
Store
0 in stock
Text to Me
caret

Product Details

The Tiger Brand Jack Post Super "S" 3 ft. Jack Post can adjust from a 1 ft. 7 in. to 3 ft. It has a compression load range of 18,000 lbs. at its lowest setting and 16,000 lbs. at its highest setting. It is ideal for correcting sagging floors and basement beams and providing secondary support for room additions, remodeling projects, porches and decks.
  • Strong galvanized plates
  • 1 ft. 7 in. - 3 ft. adjustment range
  • Corrects sagging floors, supports basement beams, takes weight off large furniture or appliances
  • Compression load range - 18,000 lbs. - 16,000 lbs.
  • Double carriage bolts and nuts
  • Flush adjusting steel nut with self-centering pilot into the tube
  • Positive locating holes
  • Adjusts easily with a 3/4 in. open-end or adjustable wrench
  • Return Policy

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
caret

Specifications

caret

Questions & Answers

26Questions
caret
Q:How are the plates secured to a steel I-beam? Don't want to drill any holes in the beams.
by|Jan 20, 2023
0 Answer
Answer This Question
caret
Q:Someone said there is a right way to orient these, is that true? Screw up of screw part down??? I like the screw part up!
by|Dec 5, 2022
1 Answer
Answer This Question

A:  the screw on the bottom  So is easier to lift and all the weight is on the steel screw 

by|Dec 11, 2022
    caret
    Q:These hold more weight than Akron's 11gauge jack posts. What gauge are these?
    by|Oct 2, 2022
    0 Answer
    Answer This Question
    caret
    Q:Can these be used outdoors on deck poles to support deck steps?
    by|Apr 29, 2021
    3 Answers
    Answer This Question

    A:  Yes I used mine too support a shed and deck as well

    by|Jan 3, 2023
    1 found this answer helpful

    A:  I would not do it but your best is to call Tiger Brand; Email: admin@tigerbrandjackpost.com Phone: 330.576.1750

    by|Apr 29, 2021

    A:  You could use these outdoors, but they will eventually rust. They are powder coated and covered in packing oil.

    by|Oct 25, 2022
      1 found this answer helpful
      Showing 1-4 of 26
      caret

      Customer Reviews

      4.4 out of 5
      (283)
      • 4.4
        out of 283 reviews
      • 90%recommend this product
      Filter by:
      Showing 1-10 of 283 reviews
      Several jacks previously placed. Great for replacing a wood support that should never have been ...
      Several jacks previously placed. Great for replacing a wood support that should never have been installed in first place. Also have one under area where water bed sits.
      by
      • Verified Purchase
      • Recommended
      Terrible product, poor design and metal bends easy with load. I used this to try and correct a sa...
      Terrible product, poor design and metal bends easy with load. I used this to try and correct a sagging floor. After adjustment the buldge in the metal plate pushed in flat. Going to buy some better quality jacks, waste of time and money. Unfortunately, I threw away the boxes
      by
        1 found this review helpful
        I am using these to shore up a partially sagging floor in a 32 foot crawl space. Very easy to wor...
        I am using these to shore up a partially sagging floor in a 32 foot crawl space. Very easy to work with and they are manufactured well and are of very good quality. I just bought 7 more and 4'7" model doe the other side.
        by
          • Recommended
          3 found this review helpful
          leveling this old house
          made my own mine is best. Not to many people now how to level a house properly i do
          by
            • Recommended
            4 found this review helpful
            Quality Product
            I ripped out my old master bath fiberglass shower unit and replaced it with a cement mud bed river rock floor, porcelain tile walls and a heavy frame-less glass door. This increased the floor load significantly so I thought some extra support would be a good idea. I ordered these jack posts from HD and they arrived in a timely manner. These are not a piece of precision equipment so they are a little rough around the edges but more than adequate for their purpose. The packaging is not tight so the parts bang around during shipping. This caused the threads on the screw posts to get dinged up but they can be easily cleaned up with a small file or thread restore tool, I would plan on having to do this. The top and bottom plates are not attached to the posts but could be tack welded if you need firm attachment. My install was nearly plum and I used cement piers with nailing blocks and a 4x4 top support to nail into, so free floating plates were not a problem. I was able to do the install by myself and the bathroom floor feels much more stable now. I would recommend this product if you need similar floor support.
            by
            • DIY
            • Verified Purchase
            • Recommended
            15 found this review helpful
            Good product
            I installed two of these in my crawl space to correct sagging beams. I set down a solid piece of concrete (4"x8"x16") flat, with a 4"x4"x16" piece of treated wood flat on the concrete. Then I installed the jack the screw end down. This required several small adjustments (after the jack was tightened just snug enough to keep it from falling) to get it plum. I then nailed the plate at the top to the beam and the plate at the bottom to the horizontal 4x4 wood (atop the solid concrete block.) With this arrangement, I did not have the problem outlined by ScottC (earlier post.) The approximately 3" diameter of the jack tube at the top pressed nicely against the double timber beam and the screw at the bottom pressed against the metal plate secured to the 4x4 wood. I noticed no warping of the plate as I turned the screw to tighten up the jack until I heard the beam respond a little. I will give 1/2 turn a month.
            by
            • DIY
            • Recommended
            48 found this review helpful
            Not what I needed for my Not what I needed for my application
            Neither of the mounting plates are attached to the jack. They are only held in place by friction. Once the jack is in place you can secure the mounting plates to whatever the jack is sitting on and whatever it is holding up with screws or bolts, if the surfaces are compatible with hardware. My surfaces were not compatible and I was concerned with lateral shift so I didn't feel comfortable using these jacks for my application.
            by
            • Verified Purchase
            by
            • Verified Purchase
            by
            • Verified Purchase
            by
            • Verified Purchase
            Showing 1-10 of 283 reviews

            Frequently Bought Together

            +
            +
            Price:
            $5400

            Compare Similar Jack Posts

            6-1/8 in. Beam Plate for Lally Column Jack Post with 3-1/2 in. Ring
            current product
            Super S Series 36 in. Jack Post
            Super S 4 ft. 7 in. Jack PostBest SellerSuper S Series 8 ft. 4 in. Jack Post
            Brand Tiger BrandTiger BrandTiger Brand
            Name6-1/8 in. Beam Plate for Lally Column Jack Post with 3-1/2 in. RingSuper S Series 36 in. Jack PostSuper S 4 ft. 7 in. Jack PostSuper S Series 8 ft. 4 in. Jack Post
            Price
            $4815
            $5900
            $99.00
            Save $40.00 (40%)
            $7900
            $11900
            $169.00
            Save $50.00 (30%)
            Ratings
            (6)
            (283)
            (134)
            (548)
            Maximum Height (in.)1 in36 in55 in100 in
            Minimum Height (in.)1 in19 in34 in56 in
            THD SO SKU 100415100415100415
            View ProductView ProductView ProductView Product