#1 Home Improvement Retailer

Internet # 322706997

Model # 442764

Store SKU # 1008575833

1 in. x 6 in. x 8 ft. Native Woods Timberland Light Brown Pine Shiplap Boards (6-Pack)

$110.50
/package $130.00
Save $19.50 (15%)
Apply Now
Pay $85.50 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Prefinished to reveal the native wood grain
  • Interlocking tongue and groove board with nickel gap reveal
  • Perfect for interiors and select exteriors
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

The charm of Native Woods shiplap is in the native knots and grain of the wood. Boards come with a smooth surface in natural or pre-stained options to create a stunning impression on walls, ceilings, and on select covered exterior applications like soffits and porch ceilings. The tongue and groove interlocking board will allow for a consistent nickel gap reveal and a secure installation with fewer exposed fasteners. Color may vary from board to board and lot to lot due to the natural characteristics of wood. It is recommended you purchase your entire job, plus a minimum of 10% overage to ensure most consistent color.

Highlights

  • Available in a variety of pre-stained colors
  • Board's wood grain and/or its pre-finished color may vary from board to board and lot to lot due to natural characteristics of wood
  • Areas of use may include: interior walls and ceilings and covered exterior applications like soffits and porch ceilings
  • Easy to cut and install in horizontal and vertical applications
  • Interlocking pattern requires fewer exposed fasteners
  • Tongue and groove pattern
  • 6-pack kit covers 20 sq. ft., 3.33 sq ft. per board
  • Square footage based off exposed board face width
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 322706997

Model # 442764

Store SKU # 1008575833

Specifications

Dimensions

Actual Product Length (ft.)

8 ft

Actual Product Thickness (in.)

0.6875 in

Actual Product Width (in.)

5.375 in

Coverage Area (sq. ft.)

20 sq ft

Nominal Product Length (ft.)

8 ft

Nominal Product Thickness (in.)

1

Nominal Product Width (in.)

6 in

Details

Appearance Board Type

Softwood Boards

Board Joint Type

Shiplap

Color Family

Tan

Color/Finish

Timberland Light Brown

Fastener recommendation

Nails

Features

Paintable

Finish Type

Painted

Lumber Grade

#2

Material

Pine

Moisture content

Kiln Dried

Number Of Boards Per Pack

6

Returnable

90-Day

Texture

Smooth

Warranty / Certifications

Manufacturer Warranty

N/A

Questions & Answers

4Questions
caret
Q:Are these boards suitable for exterior covered ceiling (i.e. patios) in hot and humid weather like Houston?
by|Jan 24, 2024
1 Answer
Answer This Question

A:  Ghanem, yes, these boards will be suitable for this style of installation. However, we do recommend sealing the boards with a wood protector sealant.

by|Jan 24, 2024
    caret
    Q:Is the natural color sealed? Can it be stained?
    by|Oct 2, 2023
    1 Answer
    Answer This Question

    A:  Stephanie, boards are available with a smooth surface in natural or pre-stained options, allowing you to achieve a remarkable effect on walls, ceilings, and certain covered exterior applications such as soffits and porch ceilings. Additionally, if you prefer to paint the boards, that is also an option.

    by|Oct 2, 2023
      caret
      Q:Are there trim pieces to match this nightfall black native woods shiplap?
      by|Feb 13, 2023
      1 Answer
      Answer This Question

      A:  Sandy, At this time matching trim is currently not available. Customers in the past have had great success in trimming down the shiplap board, so essentially cutting off the tongues and grooves, to their desired width of trim.

      by|Feb 14, 2023
        caret
        Q:Is it weatherproof
        by|Oct 5, 2022
        1 Answer
        Answer This Question

        A:  Henry, These boards are not weatherproof and are recommended for interior applications and for exterior applications such as covered vertical applications, covered horizontal applications and soffits.

        by|Oct 5, 2022
          Showing 1-4 of 4

          Customer Reviews

          4.5 out of 5

          • 4.5 out of 12 reviews
          • 89% recommend this product
          Filter by:
          Showing 1-10 of 12 reviews
          Color Way Off!!!
          I ordered the Native Woods Whiskey Barrel Dark Brown. The color of the product that arrived was nothing like the pictures! The pictures I added was one from their website and the rest was the actual product that arrived. Good luck....
          by
          Response from UFPI RepresentativeMar 18, 2024
          Dear Adam, UFP-Edge is sorry to hear this product did not meet your expectations . If you would like the opportunity to discuss the issue further, please reach out to us at CustomerService@UFPEdge.com or 1-844-529-5882, referencing this review, and one of our customer service representatives will be happy to assist you.
            Easy to install
            These are sturdy planks that can be used for ceiling or wall panels. Since they are 8 ft long, the installation is much faster than the average 4 ft long flooring panels that are used for wall trim. Because these are thick panels the tongue and groove give a sturdy fit. While these are listed as for indoor use, they can be used outdoors in protected areas, like the porch ceilings. If they are used in an area that is exposed to the elements, they have to be protected like any wood product.
            by
            Response from UFPI RepresentativeJan 4, 2023
            Jerome, thank you so much for taking the time to leave an excellent review. UFP-Edge really appreciates your business, and we are very glad to hear that you are satisfied with these Native Woods shiplap boards. If there is anything else we can do for you, please e-mail our customer service department at CustomerService@UFPEdge.com, and one of our representatives will be happy to assist you.
            • Recommended
            Shiplap, shiplap, shiplap.
            We watch a lot of home-renovation shows on TV and shiplap is always the treasure to be discovered. Ironically, we really found it on our second home project-- original shiplap on a 1922 cottage (expanded). Problem was, it was used on the exterior as expected and we wanted it as an accent on an interior wall. This UFP product gives you all the looks of 1922 shiplap, without all the fuss. It arrives six boards per box, carefully wrapped. One side is finished/primed in white and the other is unfinished. As a new wood, there are generally splits in the end of the board, but nothing seen in the middle. The machine hewn boards seems perfect and they fit together nicely. These will be installed during the upcoming winter.
            by
            Response from UFPI RepresentativeOct 5, 2022
            Enuf2bDangerous, UFP- Edge appreciates your business and values your feedback. If there is anything else we can do for you, please e-mail our customer service department at ufpretailcs@ufpi.com.
            • Recommended
            Beautiful & sturdy shiplap
            This shiplap is made from solid wood, I believe it's pine. It is weathered white and ready to go. It cuts well. The tongue and groove & the pieces fit well together to leave the perfect gap to reflect that it's shiplap. If you long for shiplap, this is a great one and the price isn't overwhelming (as of Sept '22). I have only been able to start using the product on my kitchen remodel and won't be able to complete it until after my countertops are installed so I can't show you the finished wall but the starter rows that I put in between the cabinets and future trim around the door are beautiful. (See pics)
            by
            Response from UFPI RepresentativeOct 5, 2022
            LisaCS, thank you so much for taking the time to leave an excellent review. UFP-Edge really appreciates your business. If there is anything else we can do for you, please e-mail our customer service department at ufpretailcs@ufpi.com.
            • Recommended
            Great Siding!
            We have an old, stand-alone hot tub room built up against our house. It was originally sided with 1/4-inch CCA plywood. The years have not been good for that plywood. I got some natural colored siding from UFP-Edge, and really like it. I got this UFP-Edge - UFP-Edge 1 in. x 6 in. x 8 ft. Native Woods Gunmetal Dark Gray Shiplap Weathered Barn Wood Boards (6-Pack) to do the third side as an accent color. This siding goes up nice, and nails securely. It should last much longer than that old plywood did. I love the tongue & groove on this siding. It is wide enough that you can leave a reveal, or shove it closer together, depending on your needs. Thanks UFP-Edge, and Home Depot!
            by
            Response from UFPI RepresentativeSep 27, 2022
            Dear Historian, UFP-Edge appreciates you taking the time to let us know about your experience! If there’s anything else we can help you with, please e-mail our customer service department at ufpretailcs@ufpi.com.
            • Recommended
            This is real shiplap and very easy to install
            These UFP native woods shiplap boards are the real deal! No faux wood here. I tried glue up faux tin on my bathroom ceiling. They are quite charming but because some just won’t stick to my popcorn ceiling, I can see sags, and I simply don’t like that so I chose to install these boards on my ceiling in one of my bathrooms that I’m currently remodeling. When I received these boards I was so glad that although they are 6 in. wide by 8 ft long, they are lightweight enough for a one person install. I used a cordless braid nailer, which I hung on the ladder as I put the boards in place. Once you get the first row hung, which you may need help with to get it level, it’s pretty easy after that. The boards fit tightly together, even though there is a gap, which I prefer on a ceiling. Initially I was confused which side was the correct side because the front side shown in the description photos looks natural but the actual boards have noticeable mars, stamped words and discolorations on the natural side. I had to call the company to find out which side faces out. Turns out it’s the side that looks nothing like the photos, but works out even better for me. It’s an off white color. The correct side is smoother and looks more finished. I love the versatility of these boards and you do have to let them acclimate before installation. These boards are end matched and being that this is my first time installing shiplap, I didn’t really know what that means and the included instructions don’t explain it. I enrolled in YouTube University for a few classes and see that it simply means the ends butt up instead of having tongue and grooves. Being that I’ve laid several engineered wood and LVP floors, I prefer tongue and groove. The seams look better. The boards are very easy to cut with a miter saw but I found cutting with the back side up left a cleaner cut and my saw has a newish blade. It’s also important to angle your brad nails, which goes directly into the tongue, called blind nailing. This I found difficult to do because of the tip design of my braid nailer. It simply wouldn’t allow a good angle because the safety tip is so large. I did the best I could then used a nail punch when necessary. This is no fault of the boards but due to my nailer. I think the included instructions could be better written and illustrated. They seem to be written for pros and not for first timers or diy’ers. They could be a lot less complicated and more informative. Ideally, installing these boards would look fantastic if you don’t have to make any cuts and I highly recommend them for that. Otherwise you will see seam gaps, which of course can be improved with wood filler, my best friend. Some boards are warped. Sit those to the side and use for cuts. Because these boards are real wood they mar, splinter, and dent very easily. Do not shoot brad nails in the natural knots. I did and the entire knot punched out leaving a dime size hole in a board I had already installed! These board will install much easier on a non textured ceiling. They have no give and some can be a bit challenging to join however, they are a fantastic product that looks classy and are very simple to install. I chose the native wood color.
            by
            Response from UFPI RepresentativeSep 26, 2022
            Dear Babylyle, UFP-Edge appreciates you taking the time to let us know about your experience and provide feedback for other customers! If there’s anything else we can help you with, please e-mail our customer service department at ufpretailcs@ufpi.com.
            • Recommended
            Perfect lumber
            If there is such a thing as perfect lumber this is it. I received 36 1x6x8 boards, and every one is perfectly straight, no bowing, no warpage, no twist. The milling of the tongues and grooves is precise. The grooves have a depth stop milled in the to allow each joint to be the same gap. We choose the barn board finish, which is a white wash, however, the unfinished backs look so good we contemplated installing them with unfinished side exposed and varnishing them for a knotty pine look. If your looking for quality tongue and groove lumber this is it.
            by
            Response from UFPI RepresentativeSep 26, 2022
            JimB, UFP-Edge appreciates your business and values your feedback. If there is anything else we can do for you, please e-mail our customer service department at ufpretailcs@ufpi.com.
            • Recommended
            Great looking wood
            These are really nice tongue and groove boards for an accent wall or any other purpose that you have in mind. They have clean, well defined tongues and grooves that lock together easily. The boards are straight and have a minimum of small smooth knots. The knots give a nice rustic look if you are going to leave them natural or with a clear finish. They are smooth and I am sure that they will take paint very well with a suitable primer.
            by
            Response from UFPI RepresentativeSep 22, 2022
            Dear Oldmechanic, UFP-Edge appreciates you taking the time to let us know about your experience! If there’s anything else we can help you with, please e-mail our customer service department at ufpretailcs@ufpi.com.
            • Recommended
            • Verified Purchase
            • Verified Purchase
            Showing 1-10 of 12 reviews

            Compare Similar Items

            current item

            Nominal Product Length (ft.)

            8 ft

            8 ft

            8 ft

            8 ft

            Finish Type

            Painted

            Finished

            Finished

            Painted

            Board Joint Type

            Shiplap

            Shiplap

            Shiplap

            Shiplap

            Features

            Paintable

            Paintable

            Paintable

            Paintable

            Coverage Area (sq. ft.)

            20 sq ft

            17.16 sq ft

            18.48 sq ft

            18.48 sq ft