Store SKU #
A: Clint Thank you for your inquiry. USG Sheetrock Paper Drywall Joint Tape is not self adhesive. Cover joint with a thin layer of compound and embed paper joint tape, leaving about 1/32" (0.7 mm) of compound under feathered edge. While embedding the tape, remove excess compound from edge and apply a thin coat over the tape. Let dry and sand lightly as required. Apply second coat, feathering approximately 2" (50 mm) beyond first coat. Let dry, sand lightly as required and then apply third coat, feathering 2" (50 mm) beyond second coat. Sand lightly as required when dry. Hope this helps.
A: Obie Thank you for your inquiry. Sheetrock Brand Paper Drywall tape is designed for taping joints between wallboard panels as well as for use on inside corners. Hope this helps.
A: Self-adhesive tape goes on quickly - eliminates bedding coat and provides smooth ?nished joints with just two coats
A: Put the mud on the joint and then put the tape on the mud and press it in with a wide spatula.
A: No, this tape is not self adhesive. You apply this with mud.
|Brand||USG Sheetrock Brand||USG Sheetrock Brand||QEP||USG Sheetrock Brand|
|Name||2-1/16 in. x 75 ft. Paper Drywall Joint Tape||2-1/16 in. x 250 ft. Paper Drywall Joint Tape||2 in. x 50 ft. Indoor Alkaline Resistant Backer Board Seam Tape Roll||2-1/16 in. x 500 ft. Heavy Paper Drywall Joint Tape|
|Drywall Features||No Additional Features||No Additional Features||No Additional Features||No Additional Features|
|Tape Length (ft.)||75||250||50||500|
|Number of Rolls Included||1||1||1||1|
|THD SO SKU||1002561613|
|View Product||View Product||View Product||View Product|