This 8 ft. Landscape Timber is good for lining flower beds and raised vegetable gardens. The wood edging will help keep mulch and soil where you put it and helps prevent grass from encroaching on your garden. Treated with a preservative process that is proven safe for use around people, pets and plants.
Actual Product Length (ft.) | 8 ft |
---|---|
Actual Product Thickness (in.) | 3.5 in |
Actual Product Width (in.) | 3.5 in |
Nominal Product Length (ft.) | 8 ft |
Nominal Product Thickness (in.) | 3.5 in |
Nominal Product Width (in.) | 3.5 in |
Chemical retention (lb./cu. ft.) | 0.01 |
---|---|
Fastener Recommendation | Galvanized Fastener |
Features | Paintable, Stainable |
Lumber Grade | n/a |
Lumber quality | No-prior |
Material | Wood |
Pressure Treatment Chemical | MCA - Micronized Copper Azole |
Texture | Smooth |
Wood Species | Southern Pine |
Manufacturer Warranty | See store for details |
---|
there are hot dipped galvanized spikes sold in Home Depot, various lengths to drive into the ground for 1 layer secured or for stacking and connecting together on the aisle with bolts and screws, I used the 12 inch( the longest) with a pilot hole drilled
Call your local HD and ask for the lumber department or Pro Desk and ask what the price is. Also ask them how many are in stock. if they are low they will allow you to pay for them via the phone to reserve them for you. Good luck with your project
Call your local HD store and ask for the Pro Desk. They will be able to answer your questions.
What I have seen done is drill holes through each piece, then drive 1/2-inch rebar through them and into the ground. (The length depends on your exact soil conditions, etc.)
I use either "Re-Bar" that can be purchased at Home Depot or I also cut 1/2" (7/8 diameter) thin wall metal conduit cut in either 2 or 4 foot sections depending on how deep I want to drive into the ground to vertically support these timbers. I have stacked 5 high with no sagging or shifting sideways if I use the 5 foot length (10' / 2 = 5 feet each) Alternate the timber lengths so edges don't line up, looks nicer. I have also used spiral nails 6-9" to also nail down timbers in the middle. Use a heavy hammer with leather gloves for hand & eye protection safety glasses if you are driving steel with a hammer, metal could chip & fly off of pipe or re-bar....I have experience in this.....sigh
Home Depot sells long Garden spikes which work well, otherwise you use rebar which you can cut to length. In either case it is essential to predrill before attempting to "stake, them to each other or into the ground.
You need to get rebar (available at HD) long enough to go through the stack of wood and then at least a foot into the ground. Drill holes in the timbers slightly larger than the diameter of the rebar then pound the rebar in with a heavy mallet. Best to use wood that is rated for ground contact, otherwise it will rot out in a few years.
Viewing 1-8 of 104
3.8 out of 5