#1 Home Improvement Retailer

Internet # 203164644

Model # 265503

Store SKU # 103788

1 Pint Danish Oil in Natural

  • High quality varnish produces rich glow of a hand rubbed finish
  • Deep penetrating oil seals and resists stains in one step
  • Covers up to 550 sq. ft.
  • View More Details
Store
0 in stock
Product Details

About This Product

Watco 1 Pt. Natural Danish Oil is a unique blend of penetrating oil and varnish that hardens in the wood, not on the wood. Watco Danish Oil penetrates deep into wood pores to protect from within and to enhance the natural look and feel of the wood. The Danish oil formula stains, seals and protects in 1 easy step.

Highlights

  • A unique blend of penetrating oil and varnish, danish oil penetrated deeply into wood
  • Covers up to 70 sq. ft.
  • Creates the rich, warm glow of a traditional hand-rubbed finish
  • Easy, wipe-on application leaves a rich clean color with no brush marks
  • Penetrates into wood to protect from within
  • Crack-chip and peel-resistant finish withstands use in high-traffic areas
  • Dries to touch in 30 minutes
  • Cleans up with mineral spirits
  • Online price includes PaintCare fee in the following states: CA, CO, CT, DC, ME, MN, OR, RI, VT, WA
  • Return Policy
  • California residents
     see Prop 65 WARNINGS

Product Information

Internet # 203164644

Model # 265503

Store SKU # 103788

Specifications

Dimensions

Container Size

1 Pint

Coverage Area (sq. ft.)

70 sq ft

Details

Application Method

Wipe On

Color/Finish

Natural

Dry to Touch (min.)

30 min

Interior Paint & Stains Product Type

Oil/Conditioner

Interior/Exterior

Interior

Number of coats recommended

1

Number per Package

1

Paint Tool Product Type

Wood Sealers

Paint/Stain Clean Up

Mineral Spirits

Paint/Stain Features

One Coat Coverage

Product Form

Liquid

Substrate Condition

Bare Wood, Finished Wood, Unfinished Wood

Time before recoating (hours)

72

Transparency

Transparent

Vertical/Horizontal

Vertical / Horizontal

Wood Oil Type

Danish

Warranty / Certifications

Manufacturer Warranty

Satisfaction guaranteed for full refund of purchase price

Questions & Answers

50Questions
caret
Q:I recently installed cedar 1x4 T&G on a bedroom wall. Considering using an oil to bring out wood tones and colors. Then seal it after drying with a poly urethane or lacquer finish. Is this oil going to give me the natural finish, then a deep appearance
by|Apr 11, 2024
1 Answer
Answer This Question

A:  Happy to help! Rust-Oleum Watco Danish Oil in Natural will create a rich, warm glow of a traditional hand-rubbed finish. It will enhance the natural look of the wood. A test application should be performed and in a small area first to ensure a favorable finish. We recommend using a polyurethane finish over this product for added protection. Allow the Danish Oil to dry for at least 72 hours before applying the polyurethane. - Rust-Oleum Product Support 3

by|Apr 11, 2024
    caret
    Q:I used Danish oil in my new Amish Cabin for the T&G walls. It’s been 2 weeks and the off gassing is still quite strong! It is an “open concept” cabin, around 320 sq ft, no interior walls. Will running the heater and a dehumidifier speed up this process?
    by|Oct 30, 2023
    1 Answer
    Answer This Question

    A:  Hmm, something seems wrong here. We need to know more, so we are able to give you the most accurate response. Can you please give us a call at 800-901-0411, and we would be more than happy to assist you further? -Rust-Oleum Product Support 14

    by|Oct 30, 2023
      caret
      Q:I have a walnut knife handle I epoxied on to the tang. Would this product effect the epoxy bond?
      by|Oct 28, 2023
      1 Answer
      Answer This Question

      A:  Great question. Rust-Oleum Watco Danish Oil is a penetrating product which hardens in the wood, therefore we would not recommend applying on top of an epoxy bond as it will block the oil from penetrating into the wood. -Rust-Oleum Product Support 14

      by|Oct 30, 2023
        caret
        Q:Should I use this on Acacia wood or just use mineral oil?
        by|Oct 25, 2023
        1 Answer
        Answer This Question

        A:  We're happy to help, Joyce. Yes, Rust-Oleum Watco Danish Oil Finish can be applied directly to acacia wood. -Rust-Oleum Product Support 14

        by|May 13, 2024
          1 found this answer helpful
          Showing 1-4 of 50

          Customer Reviews

          4.8 out of 5

          • 4.8 out of 265 reviews
          • 92% recommend this product
          Filter by:
          Showing 1-10 of 265 reviews
          I needed a finish that did not leave a thick film layer and this always works great. It's super ...
          I needed a finish that did not leave a thick film layer and this always works great. It's super easy to wipe on and wipe off. It's nearly foolproof. Simple walnut and maple coat rack with flip down pegs.
          by
          • Verified Purchase
          • Recommended
          Very easy to apply, brush or rag. I do lathe turnings, product cures from inside out instead of d...
          Very easy to apply, brush or rag. I do lathe turnings, product cures from inside out instead of drying on surface then into the wood. Gives a deep natural look to the wood. You can also apply other finishes over it if you wish.
          by
          • Verified Purchase
          • Recommended
          I was looking for a finish that would not drastically change the color of the barnwood I found. A...
          I was looking for a finish that would not drastically change the color of the barnwood I found. As an added bonus it “locked in” the flaky, dry wood so it will not shed on the towels. I was skeptical before starting but the result was outstanding.
          by
          • Verified Purchase
          • Recommended
          Used it for making a log base for a table. The color is perfect and went on easily
          Used it for making a log base for a table. The color is perfect and went on easily
          by
          • Verified Purchase
          • Recommended
          My go-to finish is Danish Oil, and Watco is the best of the best. I've tried the different tints...
          My go-to finish is Danish Oil, and Watco is the best of the best. I've tried the different tints - and natural is my favorite. Simply wipe/brush on your sanded/prepared surface, let it sit a few minutes, then wipe off excess. If the piece feels fuzzy or the grain was raised because of the oil, sand lightly after it dries a bit, and go again. The directions say to repeat, and I do occasionally, but once is usually enough. After drying - follow up with a paste wax for best protection.
          by
          • DIY
          • Verified Purchase
          • Recommended
          2 found this review helpful
          Good product for my wood palm crosses. Allows user to "feel the wood".
          Good product for my wood palm crosses. Allows user to "feel the wood".
          by
          • Verified Purchase
          • Recommended
          2 found this review helpful
          Watco products are great. They seem to be better quality for the money versus more hobbyist brand...
          Watco products are great. They seem to be better quality for the money versus more hobbyist brands. I have used this product on mostly hardwood materials and bamboo. It is less shiny than competitor's products, durable, and repels moisture. All Watco products are good-Tung Oil or Teak Oil, I like their Danish Oil because it comes in various tints and gives same protection. I sell wood related products for corporate promotions and gifts, Danish Oil finishes impress customers with look and feel features.
          by
          • DIY
          • Verified Purchase
          • Recommended
          2 found this review helpful
          This is a great oil finish to bring the life out of your piece of wood. I used it for jewelry box...
          This is a great oil finish to bring the life out of your piece of wood. I used it for jewelry boxes and the results are superb. I like the light oil feel. Some oil are very heavy. You can easily wash it off if it gets on your hands. However it will not wash off once it gets on your wood piece. There is little to no smells. You can use a paper towel to wipe it on or use a lint free cotton towel or rags. If you want deeper darker color just apply a few coats. What I do is put on a coat wait 15 mins wipe off excess. Wait an hour apply 2nd, 3rd etc coat. I don't see any difference after the 3rd coat however so I don't do any more applications after the 3rd one. I've been using it for about a month now and it almost all gone. When I get more I'll definitely get the bigger size one. Don't forget to shake the can before using it. And the cap can be a pain to get off. Be careful and don't spill it. See the before and after photo of my jewelry box.
          by
          • DIY
          • Verified Purchase
          • Recommended
          6 found this review helpful
          This oil is easy to use and makes natural wood look great. I used it to oil a pine piece of furni...
          This oil is easy to use and makes natural wood look great. I used it to oil a pine piece of furniture that I built and it went on easily and didn’t allow me to over-apply it. The natural grain and beauty of the wood is brought out with this oil. The best part is that it does not smell like a lot of the varnishes and other heavy chemical products do. The only drawback (which is a minor one) is that the top is hard to get open. Safety first!
          by
          • DIY
          • Recommended
          6 found this review helpful
          Virtually goof proof
          Pretty easy to use. The hardest part is getting the top off. I found flipping off the plastic child proof helps. Brings out the grain beautifully and gives a light protective coat without a plastic feel. Not overly keen about the colored oils, but I do mix a dash of the walnut into the natural for a touch more contrast.
          by
          • DIY
          • Recommended
          6 found this review helpful
          Showing 1-10 of 265 reviews

          Compare Similar Items

          current item

          Wood Oil Type

          Danish

          Butcher Block

          Butcher Block

          Tung

          Container Size

          1 Pint

          1 Pint

          1 Pint

          1 Quart