Top Rated
5/4 in. x 6 in. x 10 ft. Ground Contact Pressure-Treated Premium Southern Yellow Pine Decking Board
- 2X the protection compared to Above Ground treatment
- Treated for protection against fungal decay, rot and termites
- Use for decks, walkways, landscaping and other outdoor projects.
- View More Details
Ask about this product
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Product Details
About This Product
Pressure-Treated Pine meets the highest grading standards for strength and appearance. This double treated Ground Contact lumber must be used for applications where treated lumber is difficult to maintain, repair or replace. Treated lumber is critical to the performance and safety of an entire system or construction such as deck joists, beams and ledger boards. An additional benefit of treated lumber is its defense against rot and insect infestation for its vast majority of applications. Southern yellow pine is responsibly manufactured, safe and environmentally friendly when used as directed.Treated wood is typically still wet when it's delivered to The Home Depot or job site. As it dries, you should expect slight changes in width and length. As lumber dries, it may split, cup and warp. This is more likely to occur to occur in lower-grade boards, where knots and uneven grains are already present. Each piece of lumber is unique and carries physical characteristics that may include the following: knots, warping, shrinkage, swelling and/or splitting. Nominal Dimensions: 5/4 in. x 6 in. x 10 ft. (Actual Dimensions: 1 in. x 5.5 in. x 10 ft.)
Highlights
- Made of pine
- Ground contact treated lumber can be used in both above ground and ground contact exterior applications
- Backed by a lifetime limited warranty against termite infestation and rot
- Nominal Dimensions: 5/4 in. x 6 in. x 10 ft. (Actual Dimensions: 1 in. x 5.5 in. x 10 ft.)
- Must use ground contact pressure treated lumber where lumber is at risk for poor air circulation, less than 6 in. from the ground or has poor or no water drainage below the structure
- Ground contact treated lumber should be used in tropical climates or applications likely to have prolonged contact with vegetation or leaf litter
- Ideal for a variety of general uses including exposed structures, sill plates, decks, docks, ramps and other outdoor applications
- Uniform thickness, density and appearance for stable and long lasting performance
- Hot-dip galvanized fasteners are recommended
- Individual pieces of pressure treated lumber will reference ground contact on the end tag
- WeatherShield includes water repellant in the treatment process
- No two pieces of lumber are the same.
- Color, grain pattern and texture will vary as well.
- Premium grade lumber should be used when small knots are the desired appearance for your lumber project
- Premium grade is a high-quality lumber that has smaller and fewer knots.
- Find everything you need to complete your decking project here
- Note: product may vary by store
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Specifications
Dimensions
Actual Product Length (ft.) | 10 ft |
|---|---|
Actual Product Thickness (in.) | 1 |
Actual Product Width (in.) | 5.5 |
Approximate Weight (lb) | 23 |
Nominal Product Length (ft.) | 10 ft |
Nominal Product Length (in.) | 120.0 in |
Nominal Product Thickness (in.) | 5/4 |
Nominal Product Width (in.) | 6 in |
Details
Contact Type Allowed | Ground Contact |
|---|---|
Features | Paintable, Pressure Treated, Stainable |
Warranty / Certifications
Manufacturer Warranty | Limited lifetime |
|---|
Questions & Answers
What is the retention rating of this lumber premium board?
Hello Russell, this product has a retention level of ~0.15 pcf.
What size screws should I use for 5/4 x 6 deck board installation
Hi John, we recommend reaching out to your local Home Depot for further assistance.
What’s the difference between premium and standard treated deck boards?
Hi Kevin, Premium treated deck boards are made from higher-grade wood with fewer knots and defects, offering a more uniform appearance and better durability against the elements. In contrast, standard treated deck boards typically contain more "imperfections" such as knots, making them less visually appealing and more likely to require frequent maintenance to preserve their appearance.
Are boards kiln dried after treating?
Hello Jswan, no, this product is not KDAT.
What are the actual dimensions?
Hi Jerry, the actual measurements of this product are 1" x 5-1/2" x 12'.
what is the spacing between boards for decks
Hi Stan, the spacing between boards will depend on the moisture content of the product. If the product is wet, the boards can be abutted together as they will shrink during their drying process. If the boards are dry it is standardly recommended to be 1/4".
How long do the boards need to dry once installed before staining?
At least 6 months
Hi Csch, there is no specific timeframe, as drying time will vary per region. We recommend testing the moisture content by utilizing the water droplet test.
36 x 31= 588 sq ft deck boards 6x5/8x16 how many
Hi Darren, for further assistance with your inquiry, we recommend reaching out to a local builder in your area to ensure the best results for your project.
I believe it will take 75 boards
Viewing 1-8 of 180
Customer Reviews
4.1 out of 5
Loading Recommendations
Related Products
2 in. x 6 in. x 10 ft. #2 Prime Ground Contact Pressure-Treated Southern Yellow Pine Lumber
Built for outdoor construction where strength and moisture resistance are required, this 2 in. x 6 in. x 10 ft. #2 Prime pressure‑treated Southern Yellow Pine board offers reliable performance for residential exterior framing and general construction. Treated with MCA to help resist rot, decay, and insect damage, it is suitable for above‑ground exterior use when installed per code requirements. The 10 ft. length balances coverage and handling, helping reduce waste on medium‑scale projects. The #2 Prime grade delivers consistent strength and a cleaner appearance. Boards may be painted or sealed after installation. This lumber is not intended to replace engineered structural members or in‑ground posts. It provides durable, versatile performance for residential outdoor projects where pressure‑treated dimensional lumber is specified.
2 in. x 4 in. x 10 ft. #2 Prime Ground Contact Pressure-Treated Southern Yellow Pine Lumber
Designed for residential exterior projects exposed to weather, this 2 in. x 4 in. x 10 ft. #2 Prime pressure‑treated Southern Yellow Pine board delivers dependable performance for framing, blocking, and general outdoor construction. Pressure treated with MCA to help protect against rot, decay, and insect damage, it is intended for above‑ground exterior applications when installed in accordance with local building codes. The 10 ft. length provides flexibility for framing layouts without excessive cutting. The #2 Prime grade offers reliable strength with improved consistency and appearance. Boards may be painted or sealed after installation if desired. This product is not intended for structural posts or in‑ground use. It offers a practical solution for residential outdoor builds requiring treated dimensional lumber.
4 in. x 4 in. x 10 ft. #2 Pressure-Treated Ground Contact Southern Pine Wood Post
Every piece meets the highest grading standards for strength and appearance. This lumber is pressure treated in order to protect it from termites, fungal decay, and rot. Ideal for a variety of applications, including decks, retaining walls, play sets, walkways and other outdoor projects where lumber is exposed to the elements. This lumber can be painted or stained. When used properly, it is both safe and environmentally friendly.
2 in. x 8 in. x 10 ft. #2 Prime Ground Contact Pressure-Treated Southern Yellow Pine Lumber
Built for exterior residential projects that require wider dimensional lumber in a more manageable length, this 2 in. x 10 in. x 10 ft. #2 Prime or Better pressure‑treated Southern Yellow Pine board provides durable, consistent performance for a variety of outdoor applications. Pressure treated with MCA to help protect against rot, decay, and insect damage, this lumber is intended for above‑ground exterior use when installed in accordance with local building codes. The 10 ft. length offers a balance of coverage and handling, making it well suited for framing, blocking, rim boards, stair components, and general outdoor construction without excessive cutting or waste. The #2 Prime or Better grade delivers dependable strength with improved consistency and appearance compared to standard #2 lumber, supporting efficient installation and uniform results. This board can be painted or sealed after installation to coordinate with surrounding materials and finishes. It is not intended for ground‑contact structural posts or engineered load‑bearing applications. Designed for durability and workability, this pressure‑treated 2x10 offers a reliable solution for residential outdoor projects that benefit from wider boards and moisture‑resistant performance.
