Return this item within 90 days of purchase.
Get an immediate answer with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Zinsser B-I-N 1 qt. Shellac-Based White Interior\Spot Exterior Primer and Sealer can be used in low temperatures and sticks to any surface without sanding. The primer seals stains from water, smoke and fire damage. It also stops bleeding knots and sap streaks.
Container Size: 1 Quart
Container Size | 1 Quart |
---|
Application | Sealer | Application Method | Brush, Paint Sprayer, Roller |
---|---|---|---|
Base Material | Shellac | Coating Product Category | Primer |
Color Family | White | Color/Finish | White |
Coverage Area (sq. ft) | 100 | Dry to Touch (min.) | 20 min |
Interior/Exterior | Interior | Number of coats recommended | 1 |
Number per Package | 1 | Paint Product Form | Liquid |
Paint/Stain Clean Up | Mineral Spirits | Paint/Stain Features | Sealer |
Primer Purpose | Color Changing, Odor Blocking, Stain Blocking | Returnable | 90-Day |
Sheen | Flat/Matte | Surface Material Use | Concrete/Brick/Masonry/Stone, Drywall, Metal, Wood |
Manufacturer Warranty | Satisfaction guaranteed for full refund of purchase price |
---|
We are happy to clear this up! Rust-Oleum Zinsser B-I-N Shellac-Based Primer can be applied to concrete walls and floors to seal in pet odors. As long as the floor is going to either be painted with a 1-part floor paint or have a flooring applied over it, like carpet, hardwood flooring, tile, laminate, etc. We recommend a minimum of 2 coats of B-I-N. The goal is to have a solid film of the primer to seal in the odor. Allow 45 minutes to 1 hour between coats. Allow the primer to cure for 1 to 3 days before painting or installing any flooring. — Rust-Oleum Product Support 15
Try an enzymatic cleaner/deodorizer designed for pet urine.
We appreciate your interest. While Rust-Oleum Zinsser B-I-N Shellac-Based Primer can be used to block odors on most surfaces, it is not suitable for use on cement or concrete floors. The primer will not offer lasting results with this type of application. - Rust-Oleum Product Support 3
You are on the right track! Rust-Oleum Zinsser B-I-N Shellac-Base Primer is intended only for spot priming knots to prevent tanning bleeding. You may consider using Rust-Oleum Zinsser Cover Stain Oil-Base Primer. This is a great primer for exterior wood surfaces and can have an oil- or water-based paint applied over it after an hour. https://www.homedepot.com/p/Zinsser-Cover-Stain-1-gal-White-Oil-Based-Interior-Exterior-Primer-and-Sealer-3501/100398377 - Rust-Oleum Product Support 10
Yes, Fred! You can apply Rust-Oleum Zinsser B-I-N Shellac-Base Primer with a natural or synthetic (nylon, polyester, or blend) bristle brush, roller, or sprayer. Follow the manufacturer's instructions when using spray equipment. For airless spraying, use a 0.011"-0.013” tip at 800 to 1200 psi. If a conventional sprayer is used, spray at 45-55 psi. Wear an NIOSH-approved respirator and provide adequate ventilation. These details are found on the technical data sheet. https://images.thdstatic.com/catalog/pdfImages/70/7009bcc5-ba00-4e81-90ee-45ea3bf47615.pdf - Rust-Oleum Product Support 15
We are glad to tell you, Brian, that Rust-Oleum Zinsser B-I-N Shellac-Base Primer does not emit any smoke during the application or curing process, so it will not set off a smoke detector. - Rust-Oleum Product Support 15
We are happy to let you know that Rust-Oleum Zinsser B-I-N Shellac-Base Primer can be used on popcorn ceilings if the surface is completely dry. - Rust-Oleum Product Support 15
Great question, Rick. To clean sprayers after using Rust-Oleum Zinsser B-I-N Shellac-Base Primer, we recommend following the spray equipment manufacturer’s directions for cleaning shellac-based coatings. Clean up spills and paint drips with denatured alcohol or ammoniated detergent. If spills or drips have dried, use denatured alcohol or ammoniated detergent to soften and remove the primer. Wash application tools in a solution of 1 part ammonia and 3 parts water immediately after use. If product has dried on application tools, soak tools overnight in a solution of equal parts ammonia and water and scrub clean with a stiff brush. - Rust-Oleum Product Support 15
We are delighted to answer this for you! If Rust-Oleum Zinsser B-I-N Shellac-Base Primer is topcoated within 24 hours, there is no need to sand it first. If you topcoat after 24 hours, sand the surface and ensure it is completely clean and dry before applying the finish coat. - Rust-Oleum Product Support 15
Viewing 1-8 of 517
4.7 out of 5