Questions and Answers for APEC Water Systems Ice Maker Kit for Standard 1/4" Output Reverse Osmosis Drinking Water Systems and Water Filters with 1/4 in. O.D.Tubing

A:  Hello, Yes, this is made with LLDPE Polyetheylene and is NSF certified for drinking water. If you need any help or assistance, feel free to give us a call we are happy to help! Best Regards, APEC Support Team 800-880-4808.

A:  No it’s nylon!

A:  The tubing provided is 20 feet of plastic food grade polyethylene 1/4 OD line. It is not braided.

A:  No, this is not braided tubing.

A:  No the tubing isn't braided. Have mine for a year. No problems.

A:  Tubing is NOT braided.

A:  I think you're going to experience a significant pressure drop with that much tubing. I've read that anything over 16' will start to have a decrease in pressure.

A:  Hello, for us to be able to better answer your inquiry correctly, please feel free to give us a call we are happy to help! Best Regards, APEC Support Team 800-880-4808.

A:  The tubing is 1/4" x 20'.

A:  Hello, the 1/4" OD tubing that comes with our Ice Maker Kit is 20 feet long uncut. If you need any help or assistance, feel free to give us a call we are happy to help! Best Regards, APEC Support Team 800-880-4808.

A:  I believe it is 25 feet long. Item description or specification identifies the length as I recall.

A:  Yes

A:  yes

A:  This is a kit to use with a drinking water system such as a reverse osmosis system that is installed under a sink

A:  There is a T connector to divert water from a single source, in my case a Reverse osmosis system, to two outlets, in my case the ice machine and the sink dispenser. Then there is a shutoff valve to put in-line to the ice machine, so that if you need to work on the refrigerator and disconnect the ice machine, you can just shut off the water source, without having to shut down the whole water system. The connectors are quick link so you just push the tubing into the connector and it doesn't leak. Then hook up the other end of the tubing to the ice machine. In my case i took the existing ice machine tubing and put it directly into the shutoff valve. its easy and there are good instructions with the package.

A:  Dear Customer. Thank you for contacting APEC Water Systems. This is a kit that includes a 1/4" tubing tee connector and 20ft of 1/4" tubings, icemaker connection parts, etc to connect to an icemaker and its water dispenser. Thank you. Best Regards, APEC Support Team 800-880-4808

A:  Yes it should work as long as it uses 1/4 inch tubing

A:  As long as the APEC system uses 1/4" tubing it will work. I added the kit to a Express Water system with no problem.

A:  Dear Customer. Thank you for contacting APEC Water Systems. This 1/4" tubing icemaker kit will work with our WFS-1000 system because this unit also uses 1/4" tubing for the water output. Thank you. Best Regards, APEC Support Team 800-880-4808

A:  Hello, if the copper tubing is a 1/4" OD (outer diameter) it should fit with the John Guest inline on/off valves we commonly use with our parts/systems. If you need any help or assistance, feel free to give us a call we are happy to help! Best Regards, APEC Support Team 800-880-4808.

A:  No. Would not recommend it. It is intended to use with plastic tubing

A:  Dear Customer, Our icemaker kit comes with 20ft tubings, tee connection, shut off valve, and other connection parts that are unassembled, but easy to connect. Thank you. Best Regards, APEC Support Team

A:  You will need to do the assembly but it's easy.

A:  Needs to be assembled

A:  Hello Boberan, the tubing and all of the parts included in the Icemaker Kit are BPA free.

A:  This adapter should work. http://www.homedepot.com/p/3-8-in-x-1-4-in-Plastic-O-D-x-O-D-Coupling-PL-3021/100144498

A:  Dear Jaime, If you have a 3/8" diameter tubing for your icemaker, we do carry a 3/8" diameter tubing icemaker kit. Please contact us for details. Best Regards, APEC Support Team 800-880-4808