Q:I have an older Rockwell corded SoniCrafter that uses an allen wrench to mount the blades. Would these blades adapt to the SoniCrafter? Thanks!
by|Jan 24, 2019
4 Answers
Answer This Question
A: Yes it works fine i have the dewalt oscillating tool which is snap in and my Milwaukee is a screw on they work fine.
by|Jan 25, 2019
1 found this answer helpful
A: Yes they work. Just loosen the screw and slide under the screw and tighten. If the older blades are full circle then you have to do the remove the screw and then replace and tighten on the new blade.
by|Jan 28, 2019
A: Please contact the SoniCrafter manufacture for further assistance.
by|Jan 25, 2019
A: Hello,
I am not entirely sure. these are easily snapped on and off of the unit.
no allen wrench's needed.
by|Jan 31, 2019
Q:will the tianium blade cut Hardi-Plank?
by|Sep 10, 2018
5 Answers
Answer This Question
A: Redman, they have better options available like Jig saw and circular saw blades made for cutting fiber cement siding. (Hitachi 725397 4-Inch 6 TPI Jig Saw Blades For Fiber Cement Siding - 3 Pack)
(Irwin 15702 Fibercut 7-1/4-Inch 6 Tooth Fiber Cement Saw Blade with 5/8-Inch and Diamond Knockout Arbor) But the Titanium blades in the DeWalt set could be used in small applications but the blade teeth will probably wear out quickly and not provide a clean cut. Hope this helps ?????
by|Nov 30, 2020
1 found this answer helpful
A: I have cut just about eveything with these blades without problems. Just use the right tooth count for the right material.
by|Nov 30, 2020
1 found this answer helpful
A: Yes of course
by|May 6, 2023
A: The blades were fine. My frustration with HD is that the local store doesn't carry these in stock! No Bueno!
by|May 6, 2023
A: Yes, this model will work for cutting Hardieboard.
by|Nov 30, 2020
1 found this answer helpful
Q:how do u switch blades specifically?
by|Mar 13, 2018
3 Answers
Answer This Question
A: my dewalt oscillating saw has a pressurized thumb which when depressed allows for blade swap
by|Nov 30, 2020
1 found this answer helpful
A: The Dewalt oscillating tool just allows you to depress a lever and remove the blade while others have different releases.
by|Nov 30, 2020
1 found this answer helpful
A: It will depend on which Oscillating tool you are using.
by|May 5, 2023
Q:where can you find a depth gauge for this tool?
by|Nov 18, 2017
1 Answer
Answer This Question
A: Hi there, unfortunately DeWalt does not manufacture one for this model. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
by|May 5, 2023
Q:Does it fit makita?!
by|Sep 17, 2017
1 Answer
Answer This Question
A: Yes, it will fit Makita as this product has compatibility with major brands.
by|May 4, 2023
Q:What're the widths of the 3 blades/
by|Feb 18, 2017
2 Answers
Answer This Question
A: this is a good size for small spaces,but i also need thicker ones
by|Nov 30, 2020
1 found this answer helpful
A: DWA4203 the blade is 1 1/4" wide, DWA4206 is also1 1/4" wide blade, DWA4208 is 3/8" wide blade.
by|Apr 5, 2020
2 found this answer helpful
Q:Will this work with the ryobi P340 oscillating tool ?
by|Nov 30, 2016
1 Answer
Answer This Question
A: Yes it doez
by|Jun 1, 2021
Q:will this fit a porter cable?
by|Nov 26, 2016
1 Answer
Answer This Question
A: No, it will not fit a porter cable.
by|Sep 25, 2019
Q:Will this fit the Milwaukee Oscillating tool M18 ? is is OIS
by|Sep 1, 2016
2 Answers
Answer This Question
A: With the provided adapter it works perfect on my Milwaukee M18