Q:what is the adapter that fit on a moen pull down? the adapter that come with it only fits an American standard. Danby can't help can someone out there help???
by|Apr 21, 2020
3 Answers
Answer This Question
A: The adapter fits a majority of facets, it’s internally and externally threaded
by|Jul 29, 2020
A: No adapter is made to fit any pull down faucet. Only American standard faucets can be used to fit the adapter.
by|Apr 30, 2020
A: Take the Danby 'faucet adapter' and the 'quick connect' to a plumbing store that carries Moen products and ask them for a solution.
by|May 16, 2024
2 found this answer helpful
Q:does this machine have a heated dry?
by|Jan 24, 2020
5 Answers
Answer This Question
A: It uses hot water from the rinse cycle
by|Oct 24, 2022
A: Hello Oden,
Thank you for your question. The dishwasher does not have a heated dry cycle however the heat left in the unit after the final rinse is sufficient to cause the water on the dishes to evaporate.
Regards
Ann
by|Apr 11, 2024
2 found this answer helpful
A: Yes. However, condensation pools on top of things like coffee cups, in my experience. Easily remedied with a dish towel prior to unloading.
by|Jul 27, 2020
A: No, there's no heat coil on the bottom like a full sized dishwasher. The dishes come out fairly warm and mostly dry. There is a Jet-Dry dispenser built in that does a good job.
by|Apr 11, 2024
1 found this answer helpful
A: Hello Oden,
Thank you for your question. The dishwasher does not have a heated dry cycle however the heat left in the unit after the final rinse is sufficient to cause the water on the dishes to evaporate.
Regards
Ann
by|Jan 27, 2020
Q:is it possible to hard wired and plumb this unit in
by|Dec 5, 2019
5 Answers
Answer This Question
A: Of course you could with the proper knowledge but why would you want to.
by|Jul 29, 2020
A: Very easy to install, it took just a few minutes and we were ready to go
by|Dec 10, 2019
A: Hello Tech25,
Thank you for your question. The dishwasher is not designed to be hard wired or plumbed in. Either of these modifications may affect how the unit functions and would invalidate the warranty.
Regards
Ann
by|Mar 4, 2024
A: It’s not recommended by manufacturers and it’s not easy to do. The rubber hose is for temporary usage. The fittings are plastic and the threads are not common to match up. A licensed plumber would be able to make all these modifications. You would be voiding your warranty by doing so
by|Dec 7, 2019
A: Hello Tech25,
Thank you for your question. The dishwasher is not designed to be hard wired or plumbed in. Either of these modifications may affect how the unit functions and would invalidate the warranty.
Regards
Ann
by|Dec 10, 2019
Q:I have an adaptor on my kitchen faucet for a Clear2o water filter. Will this unit connect to that? Obviously, it would be a royal pain if I have to keep changing the adaptor. Can't be good for the rubber washer in the adaptor either.
by|Nov 20, 2019
2 Answers
Answer This Question
A: Hello Terry,
Thank you for your question. The tap adapter is designed to fit an American Standard faucet. Unfortunately it has not been tested on any other faucet/water filter.
Regards
Ann
by|Nov 21, 2019
A: Hello Terry,
Thank you for your question. The tap adapter is designed to fit an American Standard faucet. Unfortunately it has not been tested on any other faucet/water filter.
Regards
Ann
by|Nov 21, 2019
Q:How long should I leave the water faucet on?
by|Nov 13, 2019
4 Answers
Answer This Question
A: Until it's done. It's fine over-night, if you start it late.
by|Apr 11, 2024
1 found this answer helpful
A: Hello Gala,
Thank you for your question. You should leave the water faucet turned on until the fine cycle has been completed.
Regards
Ann
by|Nov 19, 2019
A: Hello Gala,
Thank you for your question. You should leave the water faucet turned on until the fine cycle has been completed.
Regards
Ann
by|Nov 18, 2019
A: The water faucet should be on the entire time the machine in on. When the washer beeps signaling the cycle is over is when you can turn the water off and unhook the hose.
by|May 6, 2020
Q:Do you sell Danby dishwasher hose separately?
by|Oct 30, 2019
5 Answers
Answer This Question
A: You can find it on Danby website
by|Jul 29, 2020
A: Hello Isabella,
Thank you for your question. You can purchase the inlet hose (part number 12676000001093), tie-in assembly/quick connect (part number 12676000000558) or the inlet pipe assembly (part number 12676000000550) on our website at www.danbyapplianceparts.com (United States) or www.danbyapplianceparts.ca (Canada).
Regards
Ann H
by|Nov 1, 2019
A: No, it can't be purchase separately
by|Oct 31, 2019
A: No. The hose and faucet connector come with it
by|Nov 5, 2019
A: Hello Isabella,
Thank you for your question. You can purchase the inlet hose (part number 12676000001093), tie-in assembly/quick connect (part number 12676000000558) or the inlet pipe assembly (part number 12676000000550) on our website at www.danbyapplianceparts.com (United States) or www.danbyapplianceparts.ca (Canada).
Regards
Ann H
by|Nov 1, 2019
Q:One of the reviewers said Home Depot will ship the machine and have a technician set it up. Does HD actually offer setup?
by|Oct 20, 2019
1 Answer
Answer This Question
A: I set mine up myself. Wasn't terribly difficult. Couldn't help you with what options Home Depot offers for a countertop dishwasher. For a full-sized dishwasher, they definitely offer setup.
by|Oct 21, 2019
Q:Can this dishwasher be lower than the sink it is draining into? can it pump the water up aproximetly 10" to lip of sink?
by|Oct 3, 2019
3 Answers
Answer This Question
A: Hello,
Thank you for your question. The dishwasher is designed to be installed on a counter as the pump is not designed for pumping the water up into a sink.
Regards
Ann H
by|Oct 8, 2019
A: Yes it can
by|Nov 5, 2019
A: Hello,
Thank you for your question. The dishwasher is designed to be installed on a counter as the pump is not designed for pumping the water up into a sink.
Regards
Ann H
by|Oct 8, 2019
Q:I have all the adapters I need but I need a longer fill hose. what do I need to get?
by|Sep 27, 2019
3 Answers
Answer This Question
A: The owners manual recommends against that, but otherwise I have no first-hand knowledge.
by|Oct 16, 2019
A: Hello Kay,
Thank you for your question. Unfortunately there are no longer hoses available for this unit. Also, using longer hoses can affect the operation of the dishwasher and may invalidate the warranty.
Regards
Ann H
by|Sep 30, 2019
A: Hello Kay,
Thank you for your question. Unfortunately there are no longer hoses available for this unit. Also, using longer hoses can affect the operation of the dishwasher and may invalidate the warranty.
Regards
Ann H
by|Sep 30, 2019
Q:Does this come with the brass small snap fitting for a faucet?
by|Jun 28, 2019
5 Answers
Answer This Question
A: No
by|Nov 19, 2019
1 found this answer helpful
A: Hello,
The portable dishwasher comes with a tap adapter which fits an American Standard faucet and all required parts to connect it up.
Regards
Ann H
by|Apr 11, 2024
1 found this answer helpful
A: Mine came with an quick-connect adapter. You unscrew the aerator, and screw the adapter up in it's place. I didn't have to get anything additional.
by|Apr 11, 2024
1 found this answer helpful
A: Yes it comes with a faucet adapter but it didnt fit mine very well and leaked water through the threads so i ended up needing to buy a different one
by|Apr 11, 2024
1 found this answer helpful
A: Hello,
The portable dishwasher comes with a tap adapter which fits an American Standard faucet and all required parts to connect it up.
Regards
Ann H