Questions and Answers for Delta MultiChoice Universal Tub and Shower Valve Body Rough-In Kit Only
- Included mounting bracket helps prevent rocking
- Includes a heat resistant pressure test cap
- Easily snaps into place
Questions & Answers
Does this rough in come with a new bonnet nut?
Hello, Thank you for your question! Yes, it will include a new bonnet nut. Please reach out with further questions! Best Regards, Tim Digital Communications Specialist
I installed this unit and have never installed a unit with shut off valves in the valve. Should the screws on either side be screwed in all the way to maximize water pressure?
Hi BPorter436, Thank you for your question about the Delta Faucet model R10000-IPWS. The stems are adjusted clockwise to close and counterclockwise to open. Please reach out with any additional questions! Best Regards, Bryan Digital Communications Specialist
What kind of rough Valve would I need to install for system like the one on the picture
Hi Edwin, Thank you for your question regarding our Delta Faucet R10000-IPWS. This valve is compatible with any 1300/1400 series or 17 or 17T series shower trim. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
I'm wanting to replace my exsisting thermastatic shower valve that went bad with one of yours. my current system has one thermastatic valve and three dirverter valves. which valve and cartridge do you recommend that will have the most flow?
Hi Lloyd, Thank you for your question regarding our Delta Faucet R10000-IPWS. The flow rate will depend on the trim kit used, the pressure in the home, and other factors. At 60 PSI the maximum flow rate will be about 6.0 GPM with a Monitor pressure-balance unit and 8.5 GPM with a Temp Assure thermostatic unit. Please feel free to contact us directly for technical information at 800-345-3358. We are available Monday through Friday from 8 a.m. to 8 p.m. and Saturdays from 9 a.m. to 6 p.m. Eastern Standard Time. Thank you for being a loyal Delta Faucet customer. Best Regards, Themar Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com
what shower rough in valve model do I use with a delta 58474-25rb shower?
Hello Valued Customer, Thank you so much for contacting Delta Faucet Company! Our standard rough valve is the R1000-UN. Please reach out directly with further questions. Best Regards, Kayla
Does Delta make part with 3/4" PEX B connections? And is there ever a flow issue with multiple shower head installations?
Hi Chris, thank you for contacting Delta Faucet Company! No, we do not manufacture the piping to connect our shower valves. If you are customizing your own shower with multiple components we would recommend installing our R11000 diverter valve. This valve will allow you to connect three different components. Depending on your specific location, you might be able to have a shared option between them. Please reach out to us directly so we can further assist you with this matter! We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist
Someone else asked about this but I am still confused. With the Delta Faucet R10000-UNBXHF, if i want both tub and shower to work do I need a diverter valve? If not what trim set and cartridge allows me to change back a forth from tub faucet to shower?
Hi LuisW, Thanks for your question regarding, R10000-IPWS! The R10000-UNBX is universal, which means it would work with any T13/14, T17, and 17T shower trims. If you are installing only a shower head and tub spout, you would not need any additional parts. The bottom port from the rough would need to be plumbed to the diverter tub spout, and the top port would be plumbed to the shower head. The tub spout diverter would redirect the water to the shower head. Please feel free to contact us with any questions or for further assistance. Best Regards, Emma Digital Communications Specialist
Recently purchased and installed this along with the Delta Rebuild Kit (RP77744) in my shower. However, when I turned the water back on, it constantly comes out of the shower head. Turn the knob all the way left and right, and still won't shut off! Why
Hi Scott, thanks for your question regarding R10000-IPWS! Flushing your shower faucet could resolve this concern, and I have linked the instructions below on how to flush your faucet. Please feel free to contact us directly at customerservice@deltafaucet.com flushing does not correct the concern. https://support.deltafaucet.com/s/article/Flushing-a-Tub-Shower-Valve Best Regards, Emma Digital Communications Specialist
Compare Key Features
Product Snapshot | |||
|---|---|---|---|
Ideal for upgrading your bath, offering universal compatibility and design flexibility. | Ideal for upgrading your bath, ensuring future trim flexibility and easy installation. | Ideal for customers who want flexible design and easy installation, ensuring lasting reliability. | Ideal for customers who want universal compatibility, ensuring future upgrades are effortless. |
Compatibility with Multiple Plumbing Systems | |||
Adjustable Components | |||
Material Quality | |||
High-grade brass | High-grade metal components | High-grade, durable brass | High-grade brass |
Number of Included Components | |||
1 component | 1 | 1-piece forged valve body | |
Ease of Installation | |||
Designed for easy installation | Designed for easy installation |
