Q:I don’t see the ASTM rating for this product. Is it okay to use on shower walls? Also, can I use Redguard with it?
by|Aug 24, 2018
2 Answers
Answer This Question
A: Look in the Technical Specs for the ASTM rating, it is there. you CAN use RedGuard, but why would you? You'd only need to use RG at the seams and to cover the screws, if you choose to.
Tech specs at: https://www.buildgp.com/product/densshield-tile-backer/
there's a PDF with all the info you need.
by|Nov 7, 2023
1 found this answer helpful
A: yes and yes. Will work perfectly for shower walls.
From the technical guide:
DensShield panels are mold resistant, and have scored a 10, the highest level of performance for
mold resistance under the ASTM D3273 test method, a testing standard set by ASTM International.
In addition, the mold resistance of DensShield Tile Backer has been validated by UL Environment
and listed in its Sustainable Product Guide utilizing microbial resistant testing based on ASTM
Standard D6329-98.
Technical Guide and Install instructions on the GP Web page:
https://www.buildgp.com/product/densshield-tile-backer/
by|Dec 15, 2021
2 found this answer helpful
Q:Can this be used for porcelain tile? The description says ceramic only.
by|Aug 12, 2018
2 Answers
Answer This Question
A: The definition states for ceramic tile. It doesn't exclude porcelain tile. I think it mentions ceramic tile because it is far more commonly used than porcelain.
by|Apr 23, 2021
A: You can use porcelain tiles on Dens-Shield.
by|Feb 28, 2020
1 found this answer helpful
Q:COST FOR DENSHEILD
by|Mar 30, 2018
3 Answers
Answer This Question
A: need pricing for one sheet of dens shield
by|Feb 25, 2021
A: money
by|May 21, 2021
2 found this answer helpful
A: Hi Marty,
Please contact your local Home Depot store for DensShield® Tile Backer price and availability in your area.
by|May 21, 2021
2 found this answer helpful
Q:Why doesn't Home Depot carry this in stores? It has it on its sight but you cant even order it. So why list it at all?
by|Jan 28, 2018
2 Answers
Answer This Question
A: Bigguy: Thank you for your inquiry with HomeDepot.com. Unfortunately, the DensShield 1/2 in. x 4 ft. x 8 ft. Backer Board is currently out of stock and does not have an ETA. Please check back with the webpage for this item for updates. We hope this information is helpful, we appreciate your business.
by|Mar 19, 2021
A: You can find 4x5 1/2 inch and 4x4 1/4 inch sizes of Dens-Shield at Dorothy's Tile & Stone at 925 Carver Road in Modesto.
Contact directly at 209-521-9395 or online at www.dorothystile.com
by|Nov 2, 2018
1 found this answer helpful
Q:I'm putting in tile in a shower, around a tub and bathroom floor. For my walls, can I attach this directly to the studs? Or does it need to go over drywall?
by|Jan 15, 2018
2 Answers
Answer This Question
A: DensShield Tile Backer can be attached directly to the studs, either wood or 20 gauge steel. Drywall is not required behind DensShield. Fasteners should be spaced 6" o.c.
by|Mar 19, 2019
2 found this answer helpful
A: Yes, this is the ideal product for that application.
by|Mar 19, 2019
Q:Should I paint on a membrane before I tile?
by|Nov 9, 2017
2 Answers
Answer This Question
A: Just use a bit of thinset to fill the screw holes and fill your joints. No membrane needed, it's got a moisture barrier built in.
by|May 5, 2023
A: Are you asking if yo
u should apply RedGard or a similar product on top of DensShield? if so, the answer is no, you do not need to paint anything on top of it before tiling. You do need to use fiberglass tape at the seams, and use thinset or RedGard to affix it. Check out the Installation manual at https://www.buildgp.com/product/densshield-tile-backer/
by|Mar 29, 2019
Q:When will this product be available at Home Depot Pittsburgh again?
by|Oct 8, 2017
1 Answer
Answer This Question
A: Hi Bill, this 1/2 in. x 4 ft. x 8 ft. Backer Board, is a store exclusive item and only able to be bought in a Home Depot store. Unfortunately we do not sell it with online stock for purchase and we are not able to advise when local Home Depot stores are re-stocked of specific items. I would advise you visit or contact your local Home Depot store for pricing and availability. Please follow the steps below to localize your Homedepot.com as well:
1. Localize Homedepot.com using your zip code (My Store Location: Change)
2. Choose the store where you want to pick up the item (Make this my Store)
We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
by|Dec 15, 2019
Q:cost per sheet
by|Sep 18, 2017
2 Answers
Answer This Question
A: It's about $10-15, very affordable!
by|Mar 29, 2019
A: Hi Joe, DensShield does not offer this to be purchased by the sheet. We apologize for the inconvenience. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
by|May 4, 2020
Q:Where is the closest store to Kansas City MO that carries this backer board? Thx
by|Aug 20, 2017
1 Answer
Answer This Question
A: Try your local Lowes. You'll probably only get the smaller sheet (roughly 4x5), but at least you can get it. I live in a major metropolitan area (Philadelphia) and the nearest seller other than Lowes is 47 miles away in Armpit, NJ or some other fanciful hamlet.
by|May 4, 2023
1 found this answer helpful
Q:Can this product be painted and finished like regular drywall? For example, in a tub surround, can I use this product for the entire surround (up to the ceiling), while tiling up to the shower head and painting the remainder above the tile?
by|Nov 1, 2016
3 Answers
Answer This Question
A: In non-tile areas as you describe, apply a 2" wide fiberglass mesh tape to any joints and skim the surface with a setting type compound to achieve a smooth and paintable finish. Consult the paint department for their recommended paint finish in this type of area.
by|Aug 13, 2019
6 found this answer helpful
A: Yes. DensShield can be painted in non-wet areas and finished like regular drywall.