Questions and Answers for Everbilt Extra Thick Toilet Wax Ring with Plastic Horn

A:  Yes, it can work on standard toilets. Contact the manufacture of the toilet for specifics on what size wax ring they recommend for use with their toilet. If you have further questions reach out to us at technical@oatey.com.

A:  new toilet should come with that part...check the box if you're buying a new toilet

A:  This is the wax gasket only.

A:  Typically you need the hose to hook to the water for the tank. Normally toilets now come with a wax ring and the bolts to mount it to the floor. The box will always say what is included.

A:  they come with the toilet

A:  Wax rings are made of slack wax.

A:  According to the product details on the website: 100% Pure, High-Grade Petroleum Wax

A:  Yes, just clean off the old one and replace with the new one

A:  Yes

A:  Yes. The wax ring is very forgiving for these situations

A:  Please contact us at technical@oatey.com or call 1-800-321-9532 and select the technical option for assistance and information on this product.

A:  Sometimes it's necessary to double up on rings to compensate for the type of circumstance that you're describing.

A:  No, you will need to add another regular wax ring in addition to this wax ring

A:  IT PROBABLY WILL BUT IF YOU BOUGHT A TOILET WITH THE THINNER WAX SEAL YOU MAY WANT TO ADD THAT ONE ON TOP OF THE THICK ONE. NOT A TRADITIONAL METHOD BUT IT WILL WORK IF YOU DO NOT WANT TO REPAIR THE FLANGE. YOU CAN BUY THE THINNER WAX SEAL AND MOLD TO THE TOP OF THE OTHER. CONTRARY TO SOME INSTRUCTIONS I FIND THAT TRYING TO PUT THE SEAL ON THE BOTTOM OF THE TOILET FIRST AND THEN SETTING THE TOILET HAS NOT WORKED FOR ME. PUT THE THICK ONE INTO THE FLANGE, MOLD THE THIN ONE ON TOP PRESSING IT FIRMLY IN PLACE. THEN CAREFULLY LOWER THE TOILET ONTO THE SEALS. MAKE SURE TO HAVE THE SET BOLTS VERTICAL AND IN PLACE WHEN LINING UP THE TOILET HOLES ON TOP. PRESS THE TOILET FIRMLY ONTO THE FLOOR.

A:  Yes it should work as the extra thick wax ring is about 1.25 inches thick.

A:  The wax ring is about 1.25 inches thick.

A:  The thickness of the wax is 1 3/8"

A:  1.25"

A:  about 1 and a half inches

A:  It is not rubber, but plastic. with a 2 3/4" opening

A:  2.5"

A:  This does not matter if you have a proper drain. Easily fits 3 and 4" drains. Steve

A:  The flange tapers down to about 2.75 inches.

A:  Yes I do

A:  If you can use a 3 or 4" opening ring that is preferable so that you do not have slow drainage issues. Steve

A:  No that should not be an issue.