Questions and Answers for Galanz 26 qt. 1800-Watt Stainless Steel 6-Slice with Air Fry Digital Toaster Oven

A:  Can't remember but I tried lifting it just now and it feels like 15-20 lbs. I don't think it'd make a great portable/picnic unit.

A:  The Galanz 0.9 cu ft. Toaster Oven weighs approximately 15.4 lbs. For additional questions, please contact Galanz Americas at customerservice@galanzamericas.com or 1-800-562-0738.

A:  No I haven’t experienced any downward heat

A:  The Galanz 0.9 cu ft. Air Fry Toaster Oven has sufficient spacing under the oven to avoid causing countertop damage. For additional questions, please contact Galanz Americas at customerservice@galanzamericas.com or 1-800-562-0738.

A:  Yes

A:  Yes, definitely. Mostly on the top.

A:  Unfortunately, the beeping cannot be disabled. For additional questions, please contact Galanz Americas at customerservice@galanzamericas.com or 1-800-562-0738.

A:  Didn't find anything in the manual to disable the beep alerts.

A:  The Galanz 0.9 cu ft. Air Fry Toaster oven will use the most power during air fry, at which point, the amp draw will reach 15 amps. Other operations will be less. For additional questions, please contact Galanz Americas at customerservice@galanzamericas.com or 1-800-562-0738.

A:  About 40 inches including the plug. It's a good appliance!

A:  The official cord length of all Galanz Toaster Ovens is 47". For additional questions, please contact Galanz Americas at customerservice@galanzamericas.com or 1-800-562-0738.

A:  Cord is 38" long. This is a very good oven. Fits almost anywhere. Just remember it gets hot when in use.

A:  The Galanz 0.9 cu ft. Toaster Oven has ~5.4" of usable space from the lowest rack position to the top elements. For additional questions, please contact Galanz Americas at customerservice@galanzamericas.com or 1-800-562-0738.

A:  It's 5 and 3/4" total, I would say something 5 and 1/2" will give you enough clearance to the element max and probably ideal is nothing over 5" from the lowest rack setting. I tried to take a photo of the space with a tape measure but hard to get the right angle.

A:  Instructions for changing time are in the manual

A:  To set the clock on the Galanz 0.9 cu ft. with Air Fry, press and hold the lower button ~3 seconds to enter clock set mode. Turn the dial to adjust the time and then press the start/cancel button to confirm. For additional questions, please contact Galanz Americas at customerservice@galanzamericas.com or 1-800-562-0738.

A:  See page 8 at: https://www.galanz.com/us/wp-content/uploads/2020/10/GTH12A09S2EWAC18-User-Manual.pdf

A:  From what I can tell and I've tried it on a few different settings, the only way to make a change is to cancel your current operation and start over.

A:  I have not been able to figure out how to add time or adjust temperature without canceling and starting over. If I am not sure of how long something needs to cook, I will begin with extra time and just turn off the over when it is done. This works for me.

A:  For the Galanz 1.1 cu ft. digital Toater Oven, the preheating is intended to ensure that the cavity is at temperature prior to cooking. The preheating step cannot be skipped. For additional questions, please contact Galanz Americas at customerservice@galanzamericas.com or 1-800-562-0738.

A:  I learned that the I can bypass the pre-heat by using the Toast mode. The toast mode heats at a set 450 degrees and offers several different time settings. I use Toast mode/feature to heat pizza, biscuits and a few other things.