A: Robert, we do not recommend spraying acetone in this sprayer as the seals will not hold up to it.We do sell Acetone sprayers.
Model #'s are 322310,319305,310135.
by|May 10, 2024
1 found this answer helpful
Q:What thread size is at the nozzle end or what 90 degree elbow fits on the end?
by|Jan 23, 2024
1 Answer
Answer This Question
A: SDZoom
The replacement parts for this unit will be a discharge kit ( this will have the nozzle and 90 degree elbow). part number 146-251 available through our customer service at 1-800-977-7293
by|Feb 19, 2024
1 found this answer helpful
Q:Can you spray on this sealer?
by|Jan 17, 2024
1 Answer
Answer This Question
A: Bebb, I am not sure what sealer you are asking about, but i do believe that sealers are too thick. To better answer your question please call 1-800-977-7293. And hopefully we can better answer your question once we know what you are trying to use.
by|Jan 22, 2024
Q:Is there a cap I can use to replace the pump? I am using a vinegar mixture for weed control and I don't want to leave the rubber seal in the mixture. I would like to take the pump out, and replace it with a cap to store the mixture. Then , rinse the pump.
by|Jan 13, 2024
2 Answers
Answer This Question
A: 1-1/2" PVC schedule 40, threaded cap fits these bottles. Use them all the time.
by|Apr 22, 2024
A: DDDD, unfortunately there is not a cap to replace for the pump. Vinegar is not recommended for our sprayers as it is considered an acetic acid. i would recommend storing the mixture in another container with a lid.
by|Jan 15, 2024
Q:Is the prop 65 warning due to the bottle itself? Is it safe to use water or is it because of the chemicals you may put in it?
by|Jan 2, 2024
1 Answer
Answer This Question
A: the prop 65 warning is to cover all parts of the sprayer.
kind regards
by|Feb 11, 2024
Q:I see others have asked but no answer Gallons Per Min (GPM) I want to know what the rate with the stream & mist (e.g., at 30 PSI stream is 0.4 GPM and the mist at the same psi is 0.11 GPM, at 15 PSI the rate is reduced by 9%) this is what I?m looking for
by|Jan 1, 2024
1 Answer
Answer This Question
A: GottaKnow,
Nozzle Testing pressure Ounces per minute
Standard Poly nozzles
Stream 29 24
Mist 29 11
High Fan 29 36
Low Fan 29 22
Premium poly nozzles
Stream 29 32
Cone 29 20
Flat Fan 29 44
Backpack Neverpump nozzles
Stream 29 34
Cone 29 30
Shower 29 60
Flat Fan 29 40
by|Apr 22, 2024
2 found this answer helpful
Q:My hdx sprayer does not pressurize, Why?
by|Dec 23, 2023
1 Answer
Answer This Question
A: Bobby, we apologize that this sprayer wouldn't hold pressure. If air is leaking from the seals, it is likely that the seals need to be lubricated. To lubricate the seals, we recommend using petroleum jelly. Please call our customer experience team at 800-253-4642 to walk through this process with you. We look forward to helping you!
by|Jun 10, 2024
1 found this answer helpful
Q:May a petroleum product be used or does that eat seals?
by|Dec 12, 2023
1 Answer
Answer This Question
A: yu can grease seals with petroleum Jelly
kind regards
HD Hudson
by|Dec 29, 2023
Q:Does not spray!!!!!
by|Dec 11, 2023
1 Answer
Answer This Question
A: please contact our customer service department or check your manual for trouble shooting
customer service 1-800-977-7293
kind regards
HD Hudson
by|Dec 12, 2023
Q:Can this sprayer use bleach?
by|Nov 27, 2023
1 Answer
Answer This Question
A: not recommend we have the 1415 HDX that would be a bleach sprayer
regards
HD Hudson