A: No. This is designed for use with HOME-FLEX CSST pipe only.
by|Feb 14, 2024
Q:Well these connect directly with the new quarter turn valve wall boxes?
by|Jun 12, 2023
1 Answer
Answer This Question
A: Hi, TedD - As long as the quarter turn valve has the appropriate sized threads to mate with the female brass adapter, it should work just fine.
by|Jun 13, 2023
Q:Does this work on CSST Wardflex pipe?
by|Mar 23, 2023
1 Answer
Answer This Question
A: No. One must not mix fittings from one CSST manufacturer with tubing from another CSST manufacturer.
by|Mar 23, 2023
Q:Can cast gas flex work with other similar gas flex for instance Ward gas flex
by|Mar 13, 2023
1 Answer
Answer This Question
A: Hi, Plumb - No. In the CSST product category, pipe and fittings have to be from the same manufacturer.
by|Mar 13, 2023
Q:Can the cast brass fittings be reused? For example, when one is used can it be removed to install another tee fitting and then retighten and the compressed?
by|Mar 13, 2023
1 Answer
Answer This Question
A: Hi Plumb - Yes, our CSST fittings may be reused so long as the fiber gasket is changed each time. A 1/2" / 3/4" combo gasket kit is available to Home Depot or at homedepot.com. FYI, we don't make a CSST tee fitting. It's important that a HOME-FLEX fitting be used only on HOME-FLEX pipe.
by|Mar 14, 2023
Q:Does the fitting come with the Supply Clamp Ring
by|Jan 25, 2023
1 Answer
Answer This Question
A: Hi, Todd - This 1" female CSST adapter has 3 parts: The flange nut is put on the CSST; a brass retainer ring is installed on the last valley of the CSST; and the mating part screws into the flange nut on the CSST. As these 2 main parts are tightened, the CSST engages the retainer ring forcing the stainless steel into a hard fiber gasket. As pressure increases, it folds in on itself creating a smooth end that is further pushed into the retainer ring creating the seal. Please see our HOME-FLEX CSST Design & Installation Manual available at homeflex.com / resources for further details. A "supply clamp ring" is not one of the components (unless you're speaking of the retainer ring.).
by|Jan 25, 2023
Q:Can i purchase replacement gaskets for homeflex CSST fittings?
by|Oct 25, 2021
1 Answer
Answer This Question
A: Yes. There is a replacement parts kit 11-057C. It includes a replacement retainer ring, gasket and even an o-ring for the old style fittings. The parts are in both 1/2" and 3/4" sizes. The stores that carry our CSST products will have the replacement parts kit.
by|Oct 26, 2021
Q:Can I install this to a male flared 1/2 inch gas line? If not can you use an adapter to convert from flared to male NPT Thread?
by|Jan 6, 2021
1 Answer
Answer This Question
A: Hi, RB - No, you cannot hook up a flare fitting to our FIPT brass adapter. You'd have to use an adapter.