Questions and Answers for Integra 18 ft. x 10 ft. White Aluminum Frame Patio Cover, 4 Posts 20 lbs. Snow Load

A:  Hello Danielle Yes you can do that and we will inlcude the needed splices to join the two kits together seamlessly as on large cover. Thank you B

A:  Hello RobP If you are asking if you can cut down the roof panels for part of your cover...the answer is yes. Thank you B

A:  Hello TBone Wind speed is 105 mph & Ground snow load is 5 lbs psf. Thank you W

A:  Hello Dabw Yes you can cut down the roof panels if needed. Thank you W

A:  Hello Phil, If you are looking for a 30 lbs snow load...this 12 x 10 model will also comply with a 30lb load....even though the description will state 20 lbs snow load. type in this model #1252006701012 in the Home Depot search box on the website. Thank you B

A:  Hello Alesika Your snow load is only 5 lbs....but your wind speed requirement is 148 mph. We reviewed the engineering and kit you cited above will comply with the snow load and the 148 mph wind speed requirement. You would need to ask your local building department if you need to submit for a building permit. If yes, they most likely will require sealed/stamped engineering to submit for the permit. We are able to order and provide electronically sealed engineering as a separate order transaction for your kit order. The cost is $285 plus tax.

A:  Hi Pamela If you live in a no-snow area we recommend a minimum of 4 inches on this 8ft deep cover to allow the water to run off the roof panels into the Front Fascia/Gutter. If you live in a snow area then 6 inches minimum would be recommended. Thank you W

A:  Hello Karen We have heard of customers installing on RVs but you will need to make sure there is a good solid area you can fasten to… Thank you W

A:  Hello Dextersmom :) None of the boxes will be iover 10ft long. Total weight approx 244 lbs +-. The Freight companies are contracted by the Home Depot, we would not know the size of the delivery trucks which can vary from city to city... Thank yopu B

A:  Hello Michelle, River Grove has a 25 lb ground snow load requirement. OPTION #1 : You would need to fasten a wood ledger 2" x 4" or 2"x6" to the brick wall first.. Using long lags screws going through the brick veneer to the wall wood framing studs and header behind the brick. Then cover the wood with aluminum fascia from Home Depot...then attach the patio cover kit to the wood ledger. OPTION #2 : Remove your house gutter and fasten the patio cover to your house fascia board. Thank you W