A: Thank you for your interest in our products. The foil side of LP SmartSide with SilverTech cannot be painted. There needs to be a minimum 3/4" air space in front of the foil to allow it to function as a radiant barrier. Painting could also cause a condensation issue.
by|Jun 27, 2022
1 found this answer helpful
Q:I wish to enclose my garage, which is part of the house, open on front and left{facing side}. Can I use SmartSide panels to cover the stud wall on the open side in FL?
by|Nov 1, 2021
1 Answer
Answer This Question
A: Thank you for your interest in our products. The key thing to consider when using LP SmartSide panels in this application is whether the back side of the panels will be exposed to moisture. This can cause the panels to fail over time.
by|Nov 1, 2021
Q:can this be installed horizontally as opposed to vertically?
by|Oct 19, 2021
1 Answer
Answer This Question
A: Thank you for your interest in our products. LP SmartSide panels should only be installed vertically. They will not be covered under our 50 year warranty if installed horizontally.
by|Nov 26, 2021
Q:Why is this not suitable for residential structures?
by|Oct 14, 2021
1 Answer
Answer This Question
A: Thank you for your interest in our products. LP SmartSide Panel with SilverTech is a product designed specifically for use on sheds and outer buildings. It is not approved for use on residential structures.
by|Nov 16, 2021
2 found this answer helpful
Q:If i install in fall on shed can i paint it after winter in spring without compromising the panels?
by|Sep 30, 2021
2 Answers
Answer This Question
A: Hello, Mike.
Thank you for your recent inquiry with The Home Depot about the LP SmartSide SmartSide 38 Series Cedar Texture Panel 8 in. OC with Silver Tech, Application As 4 ft. x 8 ft.. The Home Depot cannot advise any customer how to use the purchased product. It is up to the customer’s discretion how they use the product. However, any injuries or damage resulting from improper use of the product are not the responsibility of the Home Depot. Please be sure to read the instruction manual that comes with your product. For any other questions, please call HomeDepot.com Customer Service at 800-430-3376. Thank you for shopping Home Depot.
by|Sep 30, 2021
A: Thank you for your interest in our products. LP SmartSide panels can go up to 180 days after installation before painting is required. Generally speaking, though, it is preferable to paint as soon as possible.
by|Oct 15, 2021
1 found this answer helpful
Q:Can these panels be used as an under deck ceiling?
by|Sep 26, 2021
1 Answer
Answer This Question
A: Thank you for your interest in our SmartSide panels with SilverTech. This product is intended as a siding panel for a shed or outbuilding, and would not be recommended for this type application. To better discuss the intended application, please call our Customer Service directly at - 888 820 0325.
by|Sep 27, 2021
Q:Can this be used to replace chimney siding?
by|Aug 21, 2021
1 Answer
Answer This Question
A: Thank you for you interest in our products. LP SmartSide with SilverTech is for sheds and outer buildings. It cannot be used in this application.
by|Aug 22, 2021
Q:What is the R factor of the silver tech lining
by|May 13, 2021
1 Answer
Answer This Question
A: Thank you for your interest in our products. LP SmartSide with SilverTech has an R value of approximately 5.5 and does not provide any significant insulation.
by|Jun 1, 2021
Q:Can you paint over the panels
by|Apr 19, 2021
1 Answer
Answer This Question
A: Thank you for your interest in our products. LP SmartSide Panels with SilverTech come primed and are ready to paint using a high quality, acrylic latex paint.
by|Apr 20, 2021
Q:How do I insulate the interior walls over this product? Fiberglass? Air gap? I live in Colorado climate at 9850'.
by|Apr 18, 2021
1 Answer
Answer This Question
A: Thank you for your interest in our products. The wall cavity behind LP SmartSide panels is best filled with fiberglass insulation.