Questions and Answers for Lifeproof Alexandria Oak 6 MIL x 8.7 in. W x 48 in. L Click Lock Waterproof Luxury Vinyl Plank Flooring (20.06 sqft/case)

A:  Thanks for your question. We do not have sound testing for our product over a wood subfloor.

A:  Thank you for your question- Gaps or depressions can be filled with a patching compound formulated for use in floor installation. We do not recommend a specific one. The floor must be level to within ¼" in a 10ft. (6mm in a 3m) span; no bumps or low spots.

A:  Thank you for your question- No, they are different colors.

A:  Thank you for your question- The carton size is 48.5" x 9.375" x 2.25".

A:  Thank you for your question- Performance Accessories makes a generic line of moldings for Home Depot. The recommended stair nose color is Chicory. Plese se link https://www.homedepot.com/p/PERFORMANCE-ACCESSORIES-Chicory-1-32-in-Thick-x-1-88-in-Wide-x-78-7-in-Length-Vinyl-Stair-Nose-Molding-VSNP-03738/318707708.

A:  Thanks for your question. This plank can be installed directly on top of the subfloor. No additional underlayment is necessary. You can see the full installation guide here: https://images.thdstatic.com/catalog/pdfImages/03/03bef77a-ee6a-4ee0-ba59-6d81f15b1dde.pdf

A:  Thank you for your question- Home Depot has outsourced the trim and molding's. I do not see that they have coordinating piece for this color. I would suggest contacting Home Depot directly to see if they might have something they can recommend.

A:  Thank you for your question- Performance Accessories makes a generic line of trims and moldings for Home Depot. The recommended model number for the stair nose is 318707708. Please put it in on Home Depot search engine.

A:  Thanks for your question. We recommend 10% extra to account for cuts so you'd need a little over 10 cases. We'd suggest rounding up to 11 cases.

A:  Thanks for your question. You need to use a pH neutral cleaner (Zep and OdoBan both make neutral cleaners that are available on the shelf at Home Depot.) You should not use a cleaner with wax/polish or any sort of finish in it.

A:  Thank you for your question- We do not recommend installing in this type of environment. The required temperatures must be -25ºF – 155ºF (-31.7ºC – 68.3ºC)