Questions and Answers for Lutron Skylark Combination Fan and Light Control, 3-Speed, 1.5 Amp Fan/300W Incandescent, Single-Pole, White (S2-LFSQH-WH)

A:  No, you need (14/3) wire in your box. There may be a Hampton bay receiver you can hide in the canopy of the fan, though

A:  I have three of these in my house, and I don't think I have any special wiring. I think a good electrician would know how to hook it up. There is also an instruction booklet that comes with it, which may help.

A:  The S2-LFSQH requires independent wiring for the light and fan. Lutron would recommend reaching out to a local electrician for additional wiring. For more information on the S2-LFSQH, please visit https://www.lutron.com/TechnicalDocumentLibrary/0301276B.pdf

A:  The fan side has three speed positions. The light side is variable.

A:  Both. The slide light slides and fan slide has 3 landmarks.

A:  There will be certain stop points for the slider to hold at when selecting a fan speed.

A:  The Fan control is stepped (4 positions, OFF, LOW, MED, HIGH). The Light control has a snap/step between OFF and DIM, then it's smooth all the way up.

A:  There are clicks for each fan speed. The light is a slider but it has a click for the off position. I have three of these in my home. We love them.

A:  Thank you for your inquiry. Please reach out to our Support Team at support@Lutron.com or by phone at 1 (844) 588-7661 for assistance with obtaining replacement knobs.

A:  Thank you for your inquiry. Please reach out to our Support Team at support@Lutron.com or by phone at 1 (844) 588-7661 for additional assistance.

A:  Yes. Just did this last week. Not a problem.

A:  Yes as long as they are dimmable bulbs

A:  No I had to get halogen bulbs and I hate it. Thier too hot

A:  ONLY LED BULBS MARKED "DIMMABLE"... otherwise it will only be a useless strait on & off switch for non-dimmable bulbs.

A:  The S2-LFSQ is not rated for use with LED bulbs; only incandescent/halogen lighting. Instead, Lutron recommends the MACL-LFQ. This fan/light control is rated for 75W of compatible LEDs. To see which LEDs are compatible, please visit www.lutron.com/ledfinder.

A:  Lutron offers the MACL-LFQ, which is rated for 75W of compatible LED/CFL and a 1.5 amp 3 speed fan. When using LEDs with this product, Lutron suggests visiting www.lutron.com/ledfinder to see which LEDs are compatible.

A:  I do not know, but I am using mine with dimmable LED bulbs and they seem to work fine.

A:  You can do that with this switch for sure!

A:  That would be a negative for your LED dimmable light fixture with fan. This switch is analog and only uitable for incandescent lighting. Please find product pix enclosed better suited for your LED/FAN switch requirements. needs

A:  Lutron does not offer an LED compatible Skylark fan/light control. However the Lutron Maestro MACL-LFQ is an LED compatible fan control/light dimmer, and the Diva DVSFSQ-LF is an LED compatible fan control/light switch.

A:  You have many choices if you are willing to do a little research Hunter, Cooper, Ltron, Panasonic, Westinghouse Troposair, Legran, Quorium,Farington and there might be more

A:  Hello Joe4, I searched the homedepot.com on-line documentation and could not find the country of origin for the following four fan/light controls however they may be alternatives to the Lutron. Perhaps you wish to call them? 1. Hunter Fan company's alternative: https://www.homedepot.com/p/Hunter-Fan-and-Light-Dual-Slide-Preset-Switch-27183/100395277 For parts or service assistance, please call 888‑830‑1326 (In Canada, call 866-268-1936) or visit us at our website at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 or 2. Hampton Bay Distributed by Home Depot U.S.A., Inc. https://www.homedepot.com/p/Hampton-Bay-Ceiling-Fan-Wall-Switch-9050H/202801200?MERCH=REC-_-pip_alternatives-_-308911483-_-202801200-_-N Hampton Bay Distributed by Home Depot U.S.A., Inc. 2455 Paces Ferry Rd. N.W. Atlanta, Georgia 30339 For parts or service assistance, please call 1-877-902-5588 or 3. Monte Carlo Fan Co., a Generation Brand Company https://www.homedepot.com/p/Monte-Carlo-White-Hardwired-Ceiling-Fan-Wall-Switch-MCRC3W/205320830?MERCH=REC-_-pip_alternatives-_-203690000-_-205320830-_-N 7400 Linder Ave. Skokie, IL 60077 For parts or service assistance, please call Customer Service Department at 1-800-519-4092 (weekdays between 8:00am – 5:00pm) central time) Alternative telephone 800.347.5483 and fax 800.877.4855. 4. TroposAir aka Gulf Coast Fans https://www.homedepot.com/p/TroposAir-3-Speed-Dual-Slide-Performance-White-Fan-and-Light-Switch-9623/204317758?MERCH=REC-_-pip_alternatives-_-204317748-_-204317758-_-N 5. HINKLEY, INC. Not available at Home Depot https://www.hinkley.com/980001fwh.html Available at Ferguson and specialty lighting stores 3000 Pin Oak Parkway Avon Lake, Ohio 44012 P (440) 653-5500F (440) 653-5555 service@hinkley.com 1(800)446-5539 GE's alternative is made in China, so won't help: https://www.homedepot.com/p/GE-3-Speed-Ceiling-Fan-Wall-Switch-for-Ceiling-Fans-22158/308911483?MERCH=REC-_-pip_alternatives-_-100395277-_-308911483-_-N Good luck finding your fan and light control!

A:  Thanks for your comment. We manufacture globally in the US, China, Mexico, and more - for more information on our specific products that are manufactured in the US, please follow the below link: http://www.lutron.com/en-US/Residential-Commercial-Solutions/Pages/SolApp/Government/BuyAmericanActCompliantSolutions/BuyAmericanActCompliantSolutions.aspx

A:  The lowest setting is off for the light and fan.

A:  Each slider on the lowest setting is off for what your controlling.

A:  Lowest setting works as "off".

A:  Lowest setting is off for both fan and light.

A:  At the bottom of the slide switch it clicks off.

A:  The S2-LFSQ does not need to be paired with another switch. The lowest setting will turn the fan and lights off.

A:  Thank you for your inquiry. Please reach out to our Support Team at support@Lutron.com or by phone at 1 (844) 588-7661 for additional assistance.

A:  probably directly from the manufacturer

A:  I would think so, but can't say for sure.

A:  Hi, my issue was figuring out what to search on which took me a while. I found and got the "Lutron Skylark Split Dimmer or Fan Control Knob Replacement(Choose Color: White)" / LUT-SKHALF-2PC-WH-5 and they were $2.95 only but with shipping the total was $14.75 from Kyle Switch Plates / kyleswitchplates.com. After I replaced one later that same year somebody pulled off a second one so it was nice to have a few spares. Mine just snap on/off.

A:  I have not seen them. Maybe contacting Lurton direct they may have.

A:  Call Lutron at number given in other post they will send you some free. I will put a spot of glue on then before re-assembling and hope they stay put.

A:  sounds like you have wrred incorrectly

A:  No fan motor would be causing the hum sound.

A:  Are you getting all 3 speeds out of fan after installing switch? You must preset the fan speed to hi with the pull chain and always leave it in the high setting. The speeds must be operated only with the fan switch after installation. I always remove the pull chain extensions after installation so no one will reach up and pull these chains. This will cause a improper setting of your fan speed and may cause a hum.

A:  The S2-LFSQ is designed to control a standard 3-speed ceiling fan which only utilizes pull-chains to adjust its speeds. A fan that includes its own remote or wall control typically uses a proprietary control technology and would likely be incompatible with a third-party fan speed control. As always, Lutron would suggest reaching out to your fan manufacturer to verify if this control would be compatible with their fan.