Questions and Answers for MetalTech 7 ft. x 19 in Scaffolding Platform with 5/8 Plywood Plank and aluminum side

A:  35 lbs

A:  around 40 pounds

A:  Look under the specs page for a specific weight. We generally move one plank at a time by one man at at time. Not so heavy just more the space than makes it difficult to move.

A:  35#

A:  about 20lb very easy to carry

A:  Roughly 10 pounds

A:  The plank weighs 32 lbs.

A:  3 boards would equal 1989.47 lbs.... 7' times 19" times 75 lbs time 3 planks

A:  84" center to center. Hooks intended for round tube.

A:  Hi Pap, thank you for your question. These 7ft platforms fit all brand of scaffold sections that have a span that measure 7ft center to center. The hook to hook, center to center measurement is 7ft. or 84in.

A:  They fit my scaffolding which has a 7 ft 0 in center distance.

A:  The 2 that I just bought you can replace the plywood deck. The 3 cross beam are bolted to the side rails and once you remove the bolts from one rail only,the plywood can be removed. The plywood fits in a c-Chanel on each rail. You can buy a 4' x 8' sheet of plywood and cut to the correct size. 1 sheet will be enough to replace both decks you have

A:  The new configuration does not attach stiffeners to plywood which is a DESIGN FLAW. The plywood just slides out the end of the framework. Slide in a new piece of plywood, and attach Via 2 carriage bolts per stiffener (need 6).

A:  Thank you for your recent inquiry with The Home Depot. I believe it would be best to reach out to the manufacturer for assistance. The manufacturer is MetalTech Omega, and their customer service department can be reached at 1-800-363-7587.

A:  The plywood just slides out the end; your rotted wood will be swollen, so will be a bit hard to get out.