Questions and Answers for MetalTech Telescopic Aluminum Plank Board, Jobsite Series 8 to 13-ft. Adjustable Work Platform for Step Ladders, 2-Pack

A:  Hi Paul, Our Metaltech telescopic work plank measures 120 in. W x 12 in. D x 2 in. H but extends up to 204 in. regards J.

A:  Open dimension for this plank: 156" wide by 12" deep by 2" high. Closed dimension: 96" wide by 12" deep by 2" high. Thank you!

A:  About 12”

A:  The plank is 12" wide

A:  It is just over 12 inches wide. 12.13 inches I believe. It fits easily into the rungs of the Gorilla multi-position ladders that I have.

A:  THIS PLANK IS 12.3" WIDE IN THE CENTER AND APPROXIMATLEY 11" WIDE ON THE ENDS.

A:  If the roof is flat then yes. Try it out, and if it doesn’t work return it.

A:  Hello, Please refer to our instruction manual point 5: 5. Oil, grease or any other slippery material shall not be permitted on the surface of the plank and Point 21: 21. Safety harnesses and fall prevention lifelines shall be used by each user if the plank is used more than 10 ft (3 m) above the ground or floor. The lifelines must be secured to a suitable structural member other than the one of the plank.

A:  Top and bottom are both the same. If you ant, you can tie the plank to your ladder.

A:  The ends are flat, they do not have hooks, similar to a wood plank. Just place the plank on a ladder rung or some other support. If you’re concerned about sliding movement put a clamp on. The price is right for it’s build and durability.

A:  There are no "hooks". The ends are just as they appear in photo. If using with two ladders propped against an house, you will need 2 "horizontal hook on" brackets onto which the "plank" is laid. These are shown and sold, separately. If using between 2 ladders facing one another the plank is laid on a rung of each ladder. To secure you would need a "tie" of some kind, ex. rope .

A:  It does not "hook" on the ladders, you set it on the step of a ladder on either end or you you can use ladder jacks (https://www.homedepot.com/p/Werner-Short-Body-Ladder-Jack-AC10-14-02S/100664521) to use it on extension ladders. The plank just lays on any support, gravity keeps it in place.

A:  No, but the bottom is rough and will not slip. It grips the ladders well. Both top and bottom are the same.

A:  Hi, there is no need to tie the plank. There is an anti-slip material in between that avoid it slips. As long as you follow the safety instructions that come with the product, you should be ok.

A:  Yes!

A:  No this unit cannot be used on a Baker style sacaffolding .this unit is made to be used on telescoping multi-position ladder or 2 regular ladders with ladder jacks, please visit Metaltech web site to learn more : www.metaltech.co

A:  12”

A:  This plank is about 12.13 inches wide.

A:  12 inch wide

A:  12” fits nicely between telescoping ladder rungs.

A:  The M-PEP7000AL is extendable from 6 ft up to 9ft (1.8 up to 2.7 M). It also lockable at each 1 ft (12 inches). So 6 ft, 7 ft ,8 ft and 9 ft (108 inches).

A:  It’s a nine foot plank, last time I checked that’’s 108 inches. As far as securing I’m not sure what you mean. I have used it between ladders with no securing. It is well made and better than a wood plank. Very sturdy, but not for anyone on my 600 pound life. I’m sorry if I couldn’t help anymore.

A:  no it will not lock in at 103.5" but it is pretty stiff to move in and out