Questions and Answers for Oatey Round No-Caulk Black ABS Shower Drain with 4-1/4 in. Round Snap-In Stainless Steel Drain Cover

A:  Place the rubber pipe gasket (flat side down) over the drain pipe coming up through the No-Caulk barrel. Push down on the rubber pipe gasket until it sets at the bottom of the No-Caulk barrel. If it is a little snug, gently tap the top of the rubber pipe gasket with a blunt object until it settles to the bottom. Thread the gasket set screw into place over the drain pipe. Then tighten the gasket set screw with the supplied wrench and flat head screw driver until tight.

A:  ABS Cement.

A:  If your drain is ABS, we recommend you use 100% silicone to seal under the drain flange.

A:  Use only silicon based sealer on top of fiberglass opening. Do not use plumbers putty or it will leak.

A:  This is a snap in strainer that can be removed by lifting up on the edge of the strainer or looping something through the grate and pulling upwards.

A:  slip a flat screw driver blade under metal cover edge and pry up. Upon re-assembly you might have to bend out the small taps on the cover to make it fit tightly.