A: Hi Stubby, This hydraulic fluid does not foam as long as nothing get mixed into it. Thanks for asking. Greg
A: So far it's working like it is supposed to.
A: Hello Stubby. The 1 gal. AW32 Hydraulic Oil does not foam. Thank you for your question.
A: Yes. I have not any foaming at all.
A: Hi Lou, This is an AW32 and could be used as a replacement for the Tellus 32 but not added to it. Thanks for asking, Greg
A: Hello Lou. I would recommend the Tellus 32. That Hydraulic oil should work just fine in place of the "Power Care 1 gal. AW32 Hydraulic Oil." Keep in mind you should not mix different types/brands of oils unless it is only a small top-off. If you are replacing the oil, you should drain the unit completely of the previous oil that had been used before using the new oil type. Thank you for your question!
A: Hi Coolguy, You should be able to use this in place of the Shell brand in your log splitter. Thanks for asking. Greg
A: I did and it worked fine,. Spilt 2 cords of wood.
A: Hi coolguy, Thanks for visiting our site! Yes, this Hydraulic Oil is ideal for use in your Log Splitter pump. Thank you for asking, -Travis
A: Yes it is 10 wt. I use it in my tractor powered hydraulic log splitter.
A: Hi Randall, This will work for the 10wt log splitters, Thanks for asking. Greg
A: Hi Food, It is recommended to check you operators manual for what type of hydraulic fluid is needed for the hydraulic system. If it list the AW32/ISO32 then it can be used. Hope this helps! Greg
A: Not as tractor crankcase oil. Check your tractor manual for the viscosity required for hydraulics. This may very well work. I use it with my hydraulic log splitter. Check the viscosity requirement to get the best use for you tractor.
A: Yes. This fluid seems to be just like John Deere Low Viscosity Hy-Guard hydraulic fluid.It is rated ISO 32 which is the same as the John Deere Low Viscosity fluid. This is the recommended fluid rating for small tractors in colder climates.
A: Hi Bradley, This is an AW32/ISO32 hydraulic oil. If your tractor is able to take this type then you can use it. I recommend checking with your manual or the manufacturer for the correct type of oil to use. Hope this helps! Greg
A: Hi F28S, The is a standard AW32/ISO32 but is not a non conductive oil. Hope this helps. Greg
A: This fluid is 10w30
A: Hi Bob, This is an ISO32/AW32. This would not be used in place of the 20w50 hydraulic fluid. Hope this helps. Greg
A: I always by it thru my local Home Depot Store.
A: Thank you for asking, SeriousComposter. Please check with your local Home Depot store or by visiting homedepot.com. I hope this helps and we appreciate your interest in PowerCare! -Keri
A: Hi JR, This is a light to standard hydraulic oil for use in some log splitters, automotive pumps and hydraulic pumps that call of ISO32/AW32 hydraulic oils. Hope this helps Greg
A: This product is not officially deemed light hydraulic oil.