Q:Can i get a replacement alabaster glass shade?? BROKE GLASS
by|Nov 23, 2023
1 Answer
Answer This Question
A: Hello Karen and thank you for your inquiry. You can have the replacement glass for this fixtured ordered by contacting The Home Depot Customer Service Team and providing model # 052034-009. Thank You.
by|Nov 30, 2023
Q:Are there Cream colored shades for these bulbs?
by|Jul 28, 2023
1 Answer
Answer This Question
A: Hello Lily and thank you for your inquiry. At this time the only shades that are offered with this fixture are the Etched alabaster glass shades. Thank You.
by|Jul 28, 2023
Q:Does this light come in other colors
by|May 14, 2023
1 Answer
Answer This Question
A: Hello Ross and thank you for your inquiry. At this time, this fixture is only offered in the antique bronze finish. Thank You.
by|May 15, 2023
Q:I was cleaning the outside of the globes and the one globe came loose. I thought it maybe screws back in but it does not. I cannot get the globe to stay up. What can I do to fix this.
by|Dec 22, 2022
1 Answer
Answer This Question
A: HELLO,
THESE GLOBES ARE HELD IN PLACE BY A SOCKET RING. YOU JUST TIGHTEN THE SOCKET RING UP AND IT HOLDS THE GLOBE IN PLACE. THANK YOU
by|Nov 18, 2023
1 found this answer helpful
Q:Once this looks light is installed how do you remove the shades to clean them?
by|Aug 20, 2022
3 Answers
Answer This Question
A: You must first remove the light bulbs, then unscrew (3 screws each)the shades to wash. After cleaning, screw the shades back on and then screw in the lightbulbs.
by|Sep 4, 2024
1 found this answer helpful
A: First, shut off the power supply from your main Box. The reason is that I found that at least one line to the upstairs pathroom had the hot wire to th light instead of the light switch. My power meter showed that my light still had power even though the light was not switched on. Next, remove the bulb and you will see that there is a ring with a tab tha is screwed to the ligh socket holding the shade. Remove the ring and you will have the shade.
by|Aug 25, 2022
A: The shades screw on and off the light base.
by|Aug 24, 2022
Q:In replacing the light bulb, the part that holds the glass in place dropped and broke. Can this be replaced. Small white circle thing.
by|Apr 10, 2022
2 Answers
Answer This Question
A: You may want to contact the company that made it to see if they have a replacement part.
by|Apr 16, 2022
A: Yes it can
by|Apr 19, 2022
Q:Does light globe extend from wall enough to shine onto a 4" deep wall surface mounted medicine cabinet?
by|Apr 5, 2022
1 Answer
Answer This Question
A: This fixture extends 4 3/4 inches from the wall to the center bulb and extends 7 3/8 inches from the wall to the outer point of the shade.
by|Jun 11, 2023
1 found this answer helpful
Q:Does fixture extend out from wall (away from wall) far enough to mount above a 30" wide surface mounted medicine cabinet?
by|Apr 5, 2022
1 Answer
Answer This Question
A: No. It hit the wall mount medicine cabinet. We had to put a spacer board behind it.
by|Sep 7, 2024
2 found this answer helpful
Q:Fitter size for globes
by|Dec 21, 2021
1 Answer
Answer This Question
A: Hello Lizzie,
The glass shades supplied with the Solvang 24-in. 3-Light Vanity Light feature the following measurements: Top fitter opening is 2-1/8 inches, Lower inner-rim fitter opening is 1-5/8 inches, Height is 4-5/8 inches, and the bottom opening is 5-1/4 inches in diameter.
Thank You
by|Dec 28, 2021
Q:What size fitter ring does this accept? I have globes that i would like to use instead of these unattractive white ones. Thanks!
by|Dec 19, 2021
1 Answer
Answer This Question
A: Hello Lizzie,
The Solvang 24-in. 3-Light Vanity Light has only been tested with the glass shades that accompany the fixture. The supplied glass shades feature the following measurements: Top fitter opening is 2-1/8 inches, Lower inner-rim fitter opening is 1-5/8 inches, Height is 4-5/8 inches, and the bottom opening is 5-1/4 inches in diameter.
Thank You