Q:Can i use this for a welding rod holder extension?
by|May 3, 2022
3 Answers
Answer This Question
A: No way, it would melt
by|May 4, 2022
A: No. It can't be due to fact this wire is only rated for 120V at 20 amps. Welding machines take a bit more amperage and depending on what model of machine that you have as well.
You can look at at the name plate and look at what is the recommended for that that model.
Hope this helps.
by|May 5, 2022
A: No, it’s far too thin and only carries 20amps.
by|May 4, 2022
Q:is this good speaker wire?
by|Jun 4, 2021
2 Answers
Answer This Question
A: This is not speaker wire. This is for electricity.
by|Jun 9, 2021
A: No. You would need actual speaker wire for speakers (i.e. don't use regular wire like this). Home Depot sells speaker wire and it's a lot less expensive than regular wire.
by|Jun 7, 2021
Q:Is this wire soft
by|May 16, 2021
3 Answers
Answer This Question
A: Soft if you mean flexible. The wire is very flexible compared to solid strand.
by|May 17, 2021
A: This is stranded wire. It is much more flexible than solid wire.
by|Dec 6, 2021
A: Yes. It's stranded which means it's not solid...so in that sense it's "soft"! I assume by "soft" you mean flexible, which this wire is.
by|Jun 7, 2021
Q:This is marked THHN but in description says wet/dry? Should this be marked THWN?
by|Mar 15, 2021
2 Answers
Answer This Question
A: No clue what THWN means or what wet/dry means in this context. I’ve used it before, I’ll use it again. And I’ll stay far away from water or humidity of any kind.
by|Dec 15, 2023
1 found this answer helpful
A: No...its water RESISTANT and not WATER PROOF...
by|Dec 15, 2023
Q:Is this 100% copper? Thanks
by|Nov 4, 2020
1 Answer
Answer This Question
A: Yes, this wire is made from stranded copper with flame-retardant PVC insulation and nylon jacket.
by|Nov 9, 2020
Q:How much does the spool weigh roughly?
by|Aug 13, 2020
1 Answer
Answer This Question
A: This spool weighs approximately 12 pounds.
by|Nov 28, 2023
1 found this answer helpful
Q:The picture shows the color is red and white striped. It is red wire with a white stripe or white with a red stripe?
by|Jul 20, 2020
1 Answer
Answer This Question
A: This is red stranded THHN.
by|Jul 20, 2020
Q:Is this wire wet rated?. It always called THHN in description but I read elsewhere its also THWN?
by|May 7, 2020
2 Answers
Answer This Question
A: This is dual rated THWN
by|Nov 28, 2023
1 found this answer helpful
A: Depends on the size wire you are wanting to purchase. Our THHN is marked as THWN-2 in sizes 8 AWG and larger or marked as THWN in sizes 14, 12, and 10 AWG.
The above advice is based upon the current edition of the National Electric Code (NEC). Free access to the latest version of the NEC is available online at www.nfpa.org/freeaccess. The NEC and local building codes regulate the types of wire and cable that can be used in specific electrical applications, as well as the manner of installation. Check your local building codes before you start any wiring and cable electrical project and be sure to obtain required permits. When your work is complete, always have it inspected for compliance with local codes to ensure that it has been safely installed.
by|May 11, 2020
Q:How long in "meters" contains this roll?
by|Sep 9, 2019
6 Answers
Answer This Question
A: 152.4 meters
by|Sep 10, 2019
A: Approximately 152.4 meters.
The above advice is based upon the current edition of the National Electric Code (NEC). Free access to the latest version of the NEC is available online at www.nfpa.org/freeaccess. The NEC and local building codes regulate the types of wire and cable that can be used in specific electrical applications, as well as the manner of installation. Check your local building codes before you start any wiring and cable electrical project and be sure to obtain required permits. When your work is complete, always have it inspected for compliance with local codes to ensure that it has been safely installed.
Q:Hello, Can this cable be added as a 2nd neutral wire in a multi wire circuit thus creating 2 separate circuits? There would be 1 three wire cable(this has already been run) and 1 one wire(neutral) cable( yet to be run).
by|Jul 30, 2019
1 Answer
Answer This Question
A: Yes, this can be done when properly identifying the 2nd neutral.
If these circuits are in conduit, you will need to make sure they don't exceed the maximum conduit fill.
The above advice is based upon the current edition of the National Electric Code (NEC). Free access to the latest version of the NEC is available online at www.nfpa.org/freeaccess. The NEC and local building codes regulate the types of wire and cable that can be used in specific electrical applications, as well as the manner of installation. Check your local building codes before you start any wiring and cable electrical project and be sure to obtain required permits. When your work is complete, always have it inspected for compliance with local codes to ensure that it has been safely installed.