Questions and Answers for Varathane 1 qt. Golden Pecan Premium Fast Dry Interior Wood Stain

A:  Thanks for reaching out. While we do not have an exact match to Varathane Carbon Gray Premium Fast Dry Wood Stain, our Rust-Oleum RockSolid Deck In On Day 2X Solid Stain is available in a wide variety of colors, including several shades of gray. https://www.homedepot.com/p/Rust-Oleum-RockSolid-1-gal-Cape-Cod-Gray-Exterior-2X-Solid-Stain-319743/307428204 - Rust-Oleum Product Support 6

A:  Thanks for reaching out, Alex. A second coat of Varathane Premium Fast Dry Wood Stain can be applied 1 hour after the first coat. Apply the first coat of stain liberally with a good quality brush or clean lint free rag. Allow to penetrate for 2–3 minutes, then remove excess by wiping with a rag in the direction of the grain. Removal of all excess material is essential to ensure proper dry time and proper adhesion of topcoat. Fast Dry Stain is dry to touch in approximately 1 hour and can be recoated in 1 hour. Allow 24 hours for full cure. Always apply a test sample on a small, inconspicuous area before proceeding with the entire job. - Rust-Oleum Product Support 6

A:  Happy to help! When using Rust-Oleum Varathane Premium Fast Dry Wood Stain on interior wood surfaces that won't be walked on, a polyurethane is not required. The use of a polyurethane can help protect the surface and add longevity to the stain. - Rust-Oleum Product Support 3

A:  We appreciate your interest, Alton! At this time, we do not offer a touch-up marker for the Rust-Oleum Varathane Premium Fast Dry Wood Stain in Kona. We do offer other darker colors in the Rust-Oleum Varathane Wood Stain Touch-Up Markers. The markers can be blended together if needing to create a more custom color. https://www.homedepot.com/p/Varathane-33-oz-Dark-Walnut-Wood-Stain-Furniture-Floor-Touch-Up-Marker-340253/305568090 - Rust-Oleum Product Support 3

A:  Happy to help, Duane. Varathane Premium Fast Dry Wood Stain is an oil based stain, it can be top coat with either Varathane Oil or Water Based Polyurethane. https://www.homedepot.com/s/varathane%20polyurethane?NCNI-5 - Rust-Oleum Product Support 6

A:  Thanks for reaching out. Varathane Premium Fast Dry Wood Stain is designed for application to properly prepped bare wood, the stain needs to penetrate the wood pores for maximum color quality. Fast Dry Wood Stain cannot be applied over paint. - Rust-Oleum Product Support 6

A:  We appreciate your interest, Marvin! Since Rust-Oleum Varathane Premium Fast Dry Wood Stains are not color matched to other manufactures, we do not have a color code system for the stains. - Rust-Oleum Product Support 3

A:  Thanks for reaching out, Linda. Varathane Premium Fast Dry Wood Stain can be applied to previously stained bare (unsealed) wood. Prep the wood by sanding in the direction of the grain. Begin with #120 grit sandpaper and progress though #150, #180 and #220 grits. Since the wood was previously stained, be sure to test your stain to verify the desired color. To test, apply the stain in an inconspicuous area. - Rust-Oleum Product Support 6

A:  Happy to help! Rust-Oleum Varathane Premium Fast Dry Wood Stain must be applied to bare wood to ensure proper penetration. Any previous finish or veneer on the paneling would need to be removed prior to staining. - Rust-Oleum Product Support 3

A:  Happy to help! Yes, Rust-Oleum Varathane Premium Fast Dry Wood Stain can be applied to bare wood sleds. Make sure to topcoat with a spar urethane for protection against the elements. We recommend Rust-Oleum Varathane Water-Based Spar Urethane. https://www.homedepot.com/p/Varathane-1-qt-Clear-Satin-Water-Based-Outdoor-Spar-Urethane-2-Pack-250241H/202057149 - Rust-Oleum Product Support 3