Questions and Answers for Varathane 8 oz. Provincial Classic Wood Interior Stain

A:  We're happy to help, Tom. Rust-Oleum Varathane Classic Wood Stain needs to be applied to bare wood only in order to properly penetrate the pores of the wood. Applying a sealer would hinder the penetration process and leave a tacky finish on the surface. To help the stain get a more even finish we recommend first applying our Rust-Oleum Varathane Wood Conditioner. https://www.homedepot.com/p/Varathane-8-Ounce-Wood-Conditioner-4-Pack-342085/305594944 -Rust-Oleum Product Support 14

A:  We're happy to help, Joel. To help rejuvenate your Rust-Oleum Classic Red Mahogany Wood Stained areas we recommend lightly sanding the surface to reopen the pores of the wood and then reapplying the wood stain. -Rust-Oleum Product Support 14

A:  We're here to help! A tacky or sticky surface is likely indicator that all the excess stain was not wiped away from the surface. To remove the tacky Rust-Oleum Varathane Classic Wood Stain, you will need to wipe and buff the surface with clean rags and some mineral spirits. - Rust-Oleum Product Support 3

A:  We're happy to clear things up. This listing is for 2 quarts of Rust-Oleum Varathane Classic Wood Stain. -Rust-Oleum Product Support 14

A:  Oh no, Nicole, let's see if we can help. If Rust-Oleum Varathane Classic Wood Stain is leaving a tacky finish that typically means not all excess stain was removed. To remove the excess we recommend taking a rag lightly dampened with mineral spirits and wiping down the surface. -Rust-Oleum Product Support 14

A:  We need to gather more details to get to the bottom of this! Please give us a call at 800-901-0411 to talk with us further about your experinece with Rust-Oleum Varathane Classic Wood Stain. - Rust-Oleum Product Support 3

A:  We're happy to help, Grant. Yes, Rust-Oleum Varathane Classic Natural Wood Stain can be applied with to give a lighter tone to your wood. Be sure to sand the surface before applying to reopen the pores, so the stain can properly penetrate. -Rust-Oleum Product Support 14

A:  We're happy to help, Dan. Rust-Oleum Varathane Classic Natural Wood Stain will still alter the color of your wood and help give it a richer finish. We also do not recommend applying the wood conditioner without applying a stain after. Please also note applying these stains to a butcher block countertop will make the surface no longer a food safe surface. -Rust-Oleum Product Support 14

A:  We're happy to help, Donny. Rust-Oleum Varathane Classic Wood Stain can only be applied to bare wood surfaces as it needs to penetrate into the pores of the wood. A finish on the wood will hinder the penetration of the stain and leave a tacky finish on the surface. -Rust-Oleum Product Support 14

A:  We're happy to clear things up, Barry. While our Rust-Oleum Varathane Classic Dark Walnut Wood Stain and Rust-Oleum Varathane Classic Dark Walnut Wood Stain have the same color name the formulation of these stains are different. This will cause subtle differences in the color and will be noticeable if applied next to one another. -Rust-Oleum Product Support 14