Questions and Answers for ZAR 1 qt. Clear Gloss Water Base Exterior Polyurethane HP High Performance

A:  Brian - Sorry, this product is not for use on surfaces subject to foot traffic. See the LIMITATIONS section on the Product Data Sheet at this link: https://images.thdstatic.com/catalog/pdfImages/83/839a7bbf-a074-4625-8a5e-7ad9a99beb9c.pdf

A:  Hi Bendy, Many woods, even knotty pine, and knotty alder, have a yellow hue to them. Therefore, an oil base polyurethane is a good choice to bring out these wood’s natural color. The amber tone of the oil polyurethane will amplify the wood grain, imparting greater depth and bring out darker and lighter tones. Oil base polyurethanes add depth and richness to darker woods like walnut and cherry but darkens light-colored woods. For woods that are considered light woods (like Maple) without much gain or variation in tone, the water base crystal clear finish is a perfect choice as to not change the color of the wood. If you need further assistance please give us a call, 1-800-845-5227 Option 2

A:  Hi Bendy, The ZAR® Exterior Water Based HP Poly is best applied by synthetic brush, but it can be sprayed using an airless, conventional, or HVLP unit with a Fine Finish Tip. It can be used if there is plenty of sunlight on the cabinets. For interior wood that does not get a lot of sun, we recommend use of our ZAR® Interior OMU Polyurethane https://www.zar.com/products/zar-interior/zar-interior-oil-modified-urethane-poly-omu

A:  Hi Bendy, The ZAR® Exterior Water Based HP Poly is best applied by synthetic brush, but it can be sprayed using an airless, conventional, or HVLP unit with a Fine Finish Tip.

A:  Fernand - The slight ambering will not be really seen when used on natural wood surfaces. It will be seen on white surfaces. This slight ambering color is due to the incredible UV resistance built into the product.

A:  Marat - Thank you for your question. The product is designed for use in direct sunlight, the amount of exposure will determine the longevity of the product. It releases the UV inhibitors so a maintenance coat should be applied every 1-2 years or longer in shaded areas. It's hard to give an actual time as it all depends on exposure to the weather. If you have additional questions, please contact us at ugllabs@ugl.com, 1-800-272-3235, or chat at askugl.com

A:  No, you need a product specifically formulated for floors, such as the product shown in he link below. https://www.homedepot.com/p/Varathane-1-gal-Clear-Satin-Oil-Based-Floor-Finish-Polyurethane-2-Pack-130231/202058854?mtc=SHOPPING-BF-CDP-BNG-D24-024_013_INT_STAIN_CL-NA-Multi-NA-PLA-NA-NA-NA-NA-NBR-NA-NA-NA-FY21_Interior_PLA&cm_mmc=SHOPPING-BF-CDP-BNG-D24-024_013_INT_STAIN_CL-NA-Multi-NA-PLA-NA-NA-NA-NA-NBR-NA-NA-NA-FY21_Interior_PLA-71700000075105668-58700006463157965-92700058421894533&msclkid=38e0b2b90b10165ebf8ed01b6db3187c&gclid=38e0b2b90b10165ebf8ed01b6db3187c&gclsrc=3p.ds Mike

A:  TNoble - Thank you for considering ZAR® for your project. We do not suggest using this product on wood flooring. It's unclear if your project is interior or exterior. Our highest performing ZAR® interior polyurethane for floors is ZAR POLY OMU {https://www.homedepot.com/p/ZAR-1-gal-Clear-Satin-Oil-Modified-Interior-Polyurethane-OMU-36213/315198406} If you want a true traditional oil-based polyurethane and live in a unrestricted state (VOC regulations) I would suggest ZAR POLY - Self-Leveling {https://www.homedepot.com/p/ZAR-1-gal-Clear-Satin-Oil-Based-Interior-Polyurethane-Self-Leveling-32913/315164265} Please not that both of these polyurethanes are designed for flooring but can also be used on doors, trim work, and furniture. If you would like to discuss your project in more detail, please contact us at 1-800-272-3235, ugllabs@ugl.com, or chat at askugl.com

A:  This product is a clear finish and cannot be tinted.