#1 Home Improvement Retailer

Customer Reviews for BrassCraft 3/8 in. FIP Inlet x 3/8 in. Compression Outlet 1/4-Turn Angle Valve

Internet #202973981

Model #G2R15X C1

Store SKU #390641

  • Heavy-duty brass body is resistant to corrosion
  • Chrome finish protects it from rust and tarnish
  • Removable handle prevents unintentional operation

Customer Reviews

  • 4.6
    out of 1,078 reviews
  • 86% recommend this product
Filter by:
Showing 1-30 of 1,078 reviews
I replaced 1970's sink and toilet water supply valves with these. Instead of having to crank and crank to turn the water off in an emergency situation a simple turn of the wrist shuts the water off in a snap.
by
    15 Years and the valve stem falls off.
    Installed these 15 years ago. Went to turn the cold water off under the bathroom sink and the valve handle breaks off in my hand. The valve stem is completely rusted out. The rest of the body and valve look ok but really? The one part you don’t want to fail is made of cheap non stainless metal. If you install these check on them from to time. Replaced both the cold and hot water valves because of this. Could have caused a small flood.
    by
    Response from BrassCraft MfgSep 29, 2022
    Dear Disappointed,
    Sorry to hear you are not pleased with the product. We stand behind our BrassCraft products 100% and will gladly assist. Please contact our Customer Service Team at 1-800-345-3358.

    -Masco Canada
      Works well 1/4 turn off/on
      This vale works great. Easy to operate. Off position is identified on handle. This vale has a 1/2 npt inlet and a 3/8 tube fitting. The outlet fitting is also compatible with standard faucet hose.
      by
      • Verified Purchase
      • Recommended
      Not a ball stop valve
      This angle stop has a quality brass body, but the valve stop is NOT a ball stop but some sort of plastic sleeve. It is unknown how well this will hold up over time especially with old galvanized pipes. A piece of scale or crud could lodge in the plastic outlet hole and chew up the plastic when trying to close. A ball stop would be able to break the scale probably without significant damage. The ball stop angle valve BKTR17XC is a few dollars more expensive and unfortunately not carried by HD.
      by
        2 found this review helpful
        The best so far.
        Very happy with it. Small enough to fit behind the new one piece toilet, that does not give a lot of room
        by
        • Verified Purchase
        • Recommended
        Bloomingrove instalation
        Ease of unstallation and on and off valve
        by
        • Verified Purchase
        • Recommended
        Swapped out old style traditional Turn Shut Off Valves with...
        Swapped out old style traditional Turn Shut Off Valves with these 1/4 Turn Shut Off Valves. I have found them to be very durable and provide positive Off-On operation. These do not have rubber washers that degrade quickly with hard water so no need to replace rubber washers regularly. I coupled with a Everbilt 1/2 in. Copper Fitting x MIP Fitting Adapter for easy replacement if needed. Have yet to replace one of these type Shut Off Valves in 10 years of use. I do like to open faucets and cycle the Shut Off Valves On-Off every 4-6 months to keep them free of calcium build up.
        by
        • Verified Purchase
        3 found this review helpful
        Nice valve. Love the quarter turn.
        Nice valve. Love the quarter turn.
        by
        • Verified Purchase
        • Recommended
        Its great
        Its great
        by
        • Verified Purchase
        • Recommended
        Works great. Quarter turn works better than traditional multiturn shutoff. Be sure to use teflon ...
        Works great. Quarter turn works better than traditional multiturn shutoff. Be sure to use teflon tape on pipe thread from wall.
        by
        • DIY
        • Verified Purchase
        • Recommended
        Very easy to install!
        Very easy to install!
        by
        • Verified Purchase
        • Recommended
        As a Handyman, I've done many repairs on sinks, toilets that have outdated water valves. I 've fo...
        As a Handyman, I've done many repairs on sinks, toilets that have outdated water valves. I 've found that the outdated valves get hard to operate as materials break down, and substituting newer 1/4 turn valves has relieved the hassle of turning on/off water supplies for customers and myself.
        by
        • Verified Purchase
        • Recommended
        Great product easy to install and get it fix kuick for only few bucks
        Great product easy to install and get it fix kuick for only few bucks
        by
        • Verified Purchase
        • Recommended
        Worked great
        Worked great
        by
        • Verified Purchase
        • Recommended
        This was just what I needed
        This was just what I needed
        by
        • Verified Purchase
        • Recommended
        Made in USA
        These are a must have if you are going through the process of replacing any faucet or vanity. These are a great replacement for those old crummy multi-turn valves that leak after a few years, or sometimes even few uses. If you can remember "righty tighty", you can easily install these yourself.
        by
        • DIY
        • Recommended
        New product worked for a bit then leaked again. Strength of the product is poor
        by
        • Verified Purchase
        by
        • Verified Purchase
        by
        • Verified Purchase
        by
        • Verified Purchase
        by
        • Verified Purchase
        The store associate was very unknowledgeable. Thus, I purchased the wrong product creating an extra trip and having to bring my own technician to purchase the correct items.
        by
        Response from BrassCraft MfgMar 21, 2024
        Hello,
        Thank you for taking the time to tell us of your experience. We are always looking for ways to improve our products and we hope that you keep BrassCraft in mind for future projects. If you need additional support, please contact one of our Customer Service Representatives at 877-272-7755.
        • Verified Purchase
        Plumber had no problem installing works well.
        by
        • Verified Purchase
        by
        • Verified Purchase
        Worked as expected. Good documentation.
        by
        • Verified Purchase
        I replaced a broken cold water valve in our main bathroom which was leaking from the housing of the valve. The BrassCraft valve went on easily and worked perfectly.
        by
        • Verified Purchase
        by
        • Verified Purchase
        by
        • Verified Purchase
        by
        • Verified Purchase
        by
        • Verified Purchase
        Showing 1-30 of 1,078 reviews

        Frequently Bought Together

        +
        +
        Price:
        $10.40

        Compare Similar Items

        current item

        Connection

        FIP x Comp

        FIP x Comp

        FIP x Comp

        FIP x Comp x Comp

        Material

        Brass

        Brass

        Brass

        Brass

        Inlet Diameter (In.)

        3/8

        1/2

        1/2

        1/2

        Outlet Diameter (In.)

        3/8

        1/4

        1/2

        3/8

        Compatible Pipe Material

        Galvanized malleable iron

        Galvanized malleable iron

        Galvanized malleable iron

        Galvanized malleable iron